A photograph of a freestanding pedestal basin tells you almost nothing about how it will behave once it is installed, cleaned weekly and used by hundreds of guests. If you are specifying the SANTERSON 1050B Gold Line stand basin for a villa master bathroom or a boutique hotel washroom, the sample you receive and the written proposal behind it are the two documents that actually decide whether the order goes smoothly. Below is the comparison method our project team uses when buyers put several quotations side by side.
Start With What the 1050B Is Designed to Do
The 1050B is a freestanding ceramic washbasin with a slim tapered body and a gold line accent along the rim. It is manufactured from high-density vitreous ceramic with a smooth glossy glaze, which resists water spots and mineral build-up — the two things that make basins in busy washrooms look tired within a year. The unit stands on its own pedestal and is secured to the wall through back-panel reinforcement, so no vanity cabinet is required beneath it. A single tap hole is reserved for a single-lever faucet.
That last point matters more than buyers usually expect. A freestanding basin without a cabinet means there is nowhere to store soap, towels or cleaning cloths. Before you compare prices, decide where those items will live in the room. If the design relies on storage, you may need wall niches, a mirrored cabinet or a separate piece of joinery — and that cost belongs in the comparison, not in a surprise variation order three weeks into the job.
Check the Physical Sample Against Six Points
Request one physical sample before you commit to a room set or a floor of guest bathrooms. Lay it next to the specification sheet and check the following.
- Glaze continuity on the gold line. Run a fingertip along the accent. The glaze should cover the decoration without ridges, thin patches or exposed edges where the metallic detail meets the white body.
- Colour of the gold accent against your hardware. Bring your faucet, towel rail and any brass framing finish to the sample. Gold tones differ noticeably from supplier to supplier, and matching them after production has started is not possible.
- Footprint in the room. The 1050B page lists a size of 460×360×850 mm. Mark that outline on the floor with tape and check clearance to the door swing, WC and shower screen before you sign off.
- Rim height against your faucet and mirror. Confirm the basin rim sits comfortably below your chosen mirror and that the spout reaches the bowl without splashing onto the rim.
- Back-panel fixing detail. Ask for the fixing drawing with the sample. You need to know where the wall reinforcement must sit, because that affects what can be built into the wall behind it.
- Surface behaviour after a week of use. Leave the sample in a working bathroom for a week, wipe it with the same products your cleaning team uses, then look for dulling or staining.
Compare Proposals Line by Line, Not Price by Price
Two proposals for the same model can differ in total cost by a wide margin once you look past the unit price. Put them in one table with these rows:
| Item to compare | What a complete proposal states |
|---|---|
| Model and finish | Exact model code, colour and accent description — not just "gold line pedestal basin" |
| Technical sheet | Current data sheet attached, including dimensions and fixing detail |
| Faucet compatibility | Whether the faucet is included, and which tap hole size it requires |
| Fixing hardware | Wall fixings supplied or site-provided, and any reinforcement required |
| Packaging | Ceramic packaging specification for the quantities you are ordering |
| Quantity and spares | Total pieces, plus spare units for future replacement in a commercial setting |
| Delivery terms | Port or door delivery, who handles customs clearance, and packaging/loading arrangements |
| Matching range | Which items in the same series are quoted at the same price level |
If a proposal is silent on any row, ask before you compare totals. Packaging and delivery terms are where low unit prices usually disappear.
Compare Within One Series Before Comparing Suppliers
A common procurement mistake is comparing one basin from each of four suppliers. The cheaper option often looks attractive until you realise it cannot be coordinated with the WC and the secondary washroom sinks. Compare inside a single matched series first, then compare that series against other suppliers' series.
The 1050B belongs to the 1050 Gold Line suite, which includes the 1050A one-piece washdown toilet, the 1050WB wall-hung basin and the tall 1050WC wall-hung basin. Specifying from one series means the glaze tone, the gold accent and the silhouette carry across every washroom on the floor, which is exactly what a hotel or villa buyer is trying to achieve.
Then place that set against our other freestanding options so you can see the design trade-off clearly:
| Model | Shape and finish character | Listed size (mm) | Where it works best |
|---|---|---|---|
| 1050B Gold Line stand basin | Slim tapered body, gold line accent | 460×360×850 | Feature bathrooms where the accent ties to brass hardware |
| 1051S freestanding pedestal basin | Soft rounded minimalist outline, no metallic accent | 460×380×840 | Contemporary schemes where a plain white basin reads cleaner |
| 1003S freestanding pedestal basin | Tapered round silhouette, full-circle footprint | 490×490×805 | Larger bathrooms needing a sculptural centrepiece |
| 1004S freestanding stand basin | Clean square form, compact footprint | 400×400×850 | Small powder rooms and guest WC areas |
All four are freestanding, all fix to the wall through a back panel, and all reserve a single tap hole. So the real comparison is shape, accent, footprint and how well the model sits with the rest of your bathroom sanitary fixtures — not construction quality.
Ask the Questions That Reveal a Serious Supplier
- "Can you send the current technical data sheet for this exact model, dated?"
- "What wall reinforcement does the back-panel fixing require behind our chosen wall finish?"
- "Which faucets have you installed with this basin on previous projects, and at what spout reach?"
- "Can you quote the full 1050 series together so the glaze tone matches across every washroom?"
- "What is your replacement position if a unit arrives cracked, and how are spares supplied later?"
- "How are these units packaged for the quantity we are ordering, and what loading plan do you propose?"
A supplier who answers these in writing is managing the same risks you are. One who answers only on price has not thought past the order form.
How a Single-Source Order Reduces the Work
Sanitary ware rarely arrives as an isolated purchase. In a villa or hotel fit-out, the same project also needs vanities and cabinetry, lighting, flooring, wall finishes, screens and loose furniture. Coordinating each category with a different supplier means chasing several sample sets, several delivery windows and several warranty contacts. As a one-stop furniture and building materials supplier, SANTERSON produces ceramics alongside cabinetry, lighting, flooring, wall panels and outdoor furniture, so your basin, joinery and finishes are specified against one set of drawings and shipped on one schedule. Where a design calls for non-standard dimensions or finishes, our custom and OEM service covers prototyping and material selection before production starts.
A Simple Decision Sequence
- Confirm the room layout and where storage will sit without a vanity cabinet.
- Order one 1050B sample and test it against your hardware, cleaning products and floor outline.
- Request the current technical data sheet and the fixing drawing; check them against your drainage layout.
- Quote the whole 1050 series together, then compare that set against 1051S, 1003S or 1004S on shape and footprint.
- Rebuild every proposal in the same line-item table so packaging, delivery terms and spares are visible.
- Only then compare totals.
Request a 1050B sample and a matched quotation. Send us your washroom drawings, quantities and target finish, and we will return the technical data sheet, the fixing detail and a proposal covering the full Gold Line series alongside the cabinetry, lighting and finishes for the same rooms. Contact PHILLIP on +86-13928214007 or email santerson@qq.com — enquiries receive a response within 24 hours.