A freestanding pedestal basin is a small line item on a hotel or villa bill of quantities, yet it touches plumbing rough-in, tiling levels, countertop and joinery design, maintenance planning and several months of lead time. When the same soft-rounded ceramic shape has to repeat across guest bathrooms, public restrooms and poolside powder rooms, buyers usually stop shopping from catalogue shelves and start asking a manufacturer for OEM supply: our shape, our finish, our carton marking, in quantity. Below is how that process actually runs at SANTERSON for the 1051S stand basin and the sanitary suite around it.

What OEM means here, and where it starts

OEM sourcing means the factory produces to your specification instead of offering you whatever it already stocks. For a ceramic pedestal basin there are three realistic entry points, and the stage you choose changes both the timeline and the paperwork:

  • Standard model, your quantities. You order the 1051S as published — freestanding body, wall fixing through a back panel, one pre-drilled tap hole for a single-lever faucet. Nothing is tooled for you, so this is the fastest route and the one most project buyers begin with.
  • Surface and hardware changes. Glaze colour or sheen, tap-hole arrangement, trim accents and packing detail can usually be adjusted on an existing body. This keeps your tooling cost at zero while still giving the specification a project-specific look.
  • New form and private labelling. A bespoke silhouette needs mould development, prototyping and sign-off before production. Our Custom & OEM service covers custom design and prototyping, bespoke finishes and materials, OEM manufacturing, flexible minimum order quantities and brand customisation such as engraving, logos and packaging.

Before any of this moves, send the drawings rather than a photograph. A plan showing waste outlet type and rough-in distance, the finished floor level, and whether the wall behind is stud, brick or tiled tells the factory whether an existing body will work at all.

Stage 1 — Brief, sample and sign-off

We start with a written project brief: quantities by room type, target delivery destination, installation sequence, and the details your site team will be held to. From there we send physical samples. For ceramics, a sample is not a luxury — it is how you confirm glaze colour under your own lighting, check the feel of the glazed surface against cleaning chemicals you intend to use, and dry-fit the piece against your rough-in before the order commits.

Sign-off at this stage should be formal. A signed sample with a reference number, plus a confirmed technical sheet covering dimensions and plumbing connection, becomes the document every later carton is judged against. Confirm the basin's overall dimensions and rough-in measurements against the current technical data sheet for your batch before tiling or ordering tapware, because catalogue figures are a starting point and tapware reach and waste fittings have to match what actually ships.

Stage 2 — Production and quality control

Vitreous ceramic with a dense glossy glaze is chosen for guest bathrooms for practical reasons: the glazed surface resists water staining, limescale and yellowing, which is what housekeeping teams care about after two years of daily scrubbing rather than on the day the basin is installed. During production we check body dimensions, glaze coverage and surface defects, and confirm tap-hole position and waste outlet against the approved sheet.

For project orders this inspection happens at agreed checkpoints, not only at the end, so a problem surfaces while pieces can still be re-fired or replaced rather than after the container is sealed. If you are specifying the 1051S alongside other fixtures, group them into one production window: basins, toilets and shower sets from one supplier move as one shipment and arrive on one date.

Stage 3 — Packing, freight and clearing customs

Ceramics break in transit when packing is treated as an afterthought. We handle packaging and container loading, then arrange sea, air or rail freight with the paperwork that goes with it: commercial invoice, packing list, certificate of origin and any import permits your country requires. Shipment tracking keeps your site team informed, and door-to-door delivery means the goods land at the project address rather than at a port where someone else has to collect them. See our logistics and door-to-door delivery page for the scope of that service.

Two practical points buyers often leave too late:

  • Mark cartons by room or floor, not just by model. A tiler working through level four should not be opening forty identical boxes to find the right one.
  • Order spare basins with the main quantity. Reordering a single replacement piece later means a second freight cycle; a few spares on site cost far less than an unfinished bathroom waiting on one basin.

Stage 4 — Installation, snags and after-sales

A freestanding basin fixed to the wall through its back panel installs faster than a vanity build, because there is no cabinet carcass to scribe, no worktop to cut and no plinth to align. That simplicity still depends on preparation: the wall must be able to take the fixing, the waste must be at the confirmed height, and tiles must be set out so the tap hole lines up with the finished surface. Our installation and after-sales support covers on-site installation, inspection and snag lists, warranty coverage, spare parts and ongoing maintenance.

Ask for the snag list in writing at handover. It protects both sides — you get a closed-out punch list, and we know exactly which items need follow-up.

Keeping one design language across the whole project

Mixing ceramic shapes across bathrooms is where a specification quietly loses quality. The 1051S belongs to the 1051 sanitary ware collection, so the same profile carries through the rest of the suite: Washdown One Piece Toilet 1051A for guest bathrooms, Wall Hung Toilet 1051W where a floating installation and clear floor are wanted, and Wall Hung Ceramic Basin 1051B for compact or secondary bathrooms where the pedestal is not needed. One design family also means one cleaning regime, one set of spare parts and one visual standard for housekeeping to maintain.

Bathrooms do not sit alone in a project either. As a one-stop furniture and building materials supplier, we supply the surrounding scope from the same factory: vanity units, mirror cabinets, shower systems, wall panelling, lighting, cabinetry, flooring and outdoor furniture. Coordinating those items through one specification cycle removes the version clashes that appear when six suppliers each work from a slightly older drawing.

What to send us to get a real quotation

  • Quantities by room type, with the model or a reference image for each.
  • Waste outlet type and rough-in dimension, plus finished floor and tile-set levels.
  • Wall construction behind the basin, so fixing method can be confirmed.
  • Your target glaze finish, tapware choice and any branding or packing requirements.
  • Destination, required on-site dates and preferred Incoterms.

With those details we can tell you quickly whether a standard 1051S will do, whether a finish change is enough, or whether the project genuinely needs developed tooling — and quote accordingly. Enquiries through our contact page are answered within 24 hours during business hours, Monday to Saturday.

SANTERSON — China-based furniture and building materials manufacturer, operating since 2008, supplying hospitality, villa and office projects worldwide through design, custom/OEM production, door-to-door logistics and after-sales support.