A wall-hung basin looks simple on a specification sheet. It is one line item, one photo, one model number. The problems appear later: the frame arrives set out for a different rough-in, the glaze colour does not match the WC in the next room, and the crate has been sitting in a bonded warehouse for three weeks because nobody confirmed who clears customs. This article walks through sourcing the Wall Hung Ceramic Basin 1051B, Modern Wall Mount Bathroom Sink from a China-based manufacturer — what to check before you place the order, which documents protect you at the port, and how a single supplier handling ceramics, joinery, lighting and flooring together removes work from your site team.
Why buyers choose a wall-hung basin for project bathrooms
In guest bathrooms, powder rooms and compact hotel ensuites, floor area is the scarce resource. A wall-mounted basin leaves the floor clear, so the tile runs through without an obstruction and housekeeping can mop in one pass rather than working around a pedestal. The floating look also reads as intentional design rather than space-saving compromise, which matters when the same bathroom appears in sales imagery for a villa or in a hotel's booking listing.
The trade-off is that the wall has to do the work a floor would otherwise do. A back-pannelled ceramic basin fixes to the wall through its rear panel, and that fixing detail changes completely depending on whether you are drilling into double brick, steel stud with noggin, or an existing tiled wall over a timber frame. Confirm the substrate before you order, not when the installer arrives with the bracket.
Reading the 1051B specification sheet properly
The 1051B uses a gently curved, minimalist outline and is made from vitreous ceramic with a dense glossy glaze — a fired, low-porosity body whose surface resists water marks and limescale rather than holding them. One tap hole is reserved for a single faucet, and the wall fixing is made through the basin's rear panel. The page does not list an overflow or additional tap holes, so ask the factory to confirm what the basin is drilled for before you specify the waste and the mixer.
| Overall size | 400 × 380 × 450 mm (width × projection × height) |
| Material | Vitreous ceramic, glossy glaze |
| Mounting | Wall-hung, secured by back panel; no vanity cabinet required |
| Tap arrangement | One tap hole reserved for a single faucet (page does not list further holes) |
| Typical use | Guest bathrooms and powder rooms, apartments, boutique hotel ensuites, villa renovation |
Treat the 400 × 380 × 450 mm figure as a starting point for space planning only. Before any drawing is issued for construction, ask the factory for the current technical data sheet for the exact production run and check three things against it: the basin's projection from the finished wall face, the position of the tap hole relative to the rear fixing panel, and the waste tail length. Those three numbers drive your mixer spout reach, whether the tap lands on the deck or under the rim, and how much pipework sits behind the wall.
Specify the whole 1051 suite, not one basin
Ceramic colour is the quiet failure in multi-bathroom projects. Two rooms can be fitted with "white" basins and WCs from different ranges and still clash under LED lighting, because glaze whites differ in undertone from one body and firing batch to another. The 1051 range exists to remove that risk: the Wall Hung Toilet 1051W, Modern Wall Mounted Ceramic WC for Bathroom and the Freestanding Pedestal Basin 1051S, Modern Ceramic Stand Basin for Bathroom are described as belonging to the same 1051 suite, with the matching soft rounded outline and glossy glaze. In practice that means a guest powder room can use the wall-hung pair while a larger main bathroom uses the pedestal basin, and the two rooms read as one design instead of two separate purchases.
The floor-mounted option in the same family is the Washdown One Piece Toilet 1051A, Modern Ceramic WC for Hotel & Residential Bathroom, whose page lists both P-trap 180 mm and S-trap 250 mm rough-in options. That dual outlet is genuinely useful on refurbishment work: keep the existing floor slab drainage where it already performs, and switch to the wall-hung format only where the layout is being rebuilt with a concealed cistern frame.
What to verify before you place an overseas order
- Fixing method and substrate. Send the wall construction — brick, steel stud, timber frame, or tiled retrofit — with your enquiry and ask which bracket, fixings and load rating apply. Ask for the fixing detail drawing, not just a photo of the back panel.
- Rough-in dimensions in writing. Get centre heights and set-out distances from the finished floor and finished wall face on the purchase order itself, so a mismatch is traceable to a document rather than an email thread.
- Glaze colour and batch consistency. Order one sample basin for sign-off before the full quantity. For multi-phase work, ask whether later production runs are glazed from the same formulation, and keep your approved sample on site as the reference future deliveries are checked against.
- Faucet and waste compatibility. Check the mixer spout reach against the 380 mm projection from the wall, confirm whether a pop-up or free-flow waste is supplied, and whether the trap ships with the basin or is bought locally.
- Packaging specification. Ceramics travel as breakage risk. Ask for the packing standard — moulded foam, timber crate, corner protection, inner-carton strength — and put it on the order so a claim has something to be measured against.
- Inspection point. Agree in advance what is checked before shipment: glaze surface under raking light, dimension spot-checks against the data sheet, tap-hole position, and a water test on a sample piece from the batch.
Freight, customs and the paperwork that actually matters
Ceramics are heavy and fragile, so they move economically in mixed containers rather than alone. That is where a one-stop furniture and building materials supplier earns its place on a project: the same container can carry basins and WCs together with bathroom sanitary fixtures, vanity and storage units, lighting, flooring and wall panelling. One loading plan, one set of documents, one delivery window — instead of five separate consignments arriving in five different weeks and each needing its own clearance.
SANTERSON's logistics service covers freight forwarding by sea, air and rail, packaging and container loading, shipment tracking and furniture logistics and door-to-door delivery, along with commercial invoices, packing lists, certificates of origin and import paperwork. Read that as a service the company describes, not as a guaranteed transit time or landed cost: rates, duties and inspection requirements move, and your own broker should price the shipment for your country before you commit to an Incoterm.
Two practical decisions dominate cost and risk. First, Incoterms: an FOB or CIF quote looks cheaper until you discover that nobody in your chain is responsible for inland delivery, storage, or detention once the container lands. Second, insurance on cargo prone to breakage — confirm what is covered, what evidence a claim needs, and who photographs damaged crates at the port of discharge.
Receiving, storing and installing without claims
Breakage disputes are won or lost in the first hour after the container is opened. Photograph every crate externally before it is moved, then photograph each basin as it is unpacked — glaze face, back panel, tap hole — with the crate label visible in frame. Count and record against the packing list, and separate damaged goods from good stock so a partial claim stays credible.
Store crates upright, dry and off the ground until the bathrooms are closed in, and keep basins out of the trade sequence until tile, paint and joinery are finished; loose ceramic on a busy site gets chipped or used as a step. Before fixing anything, dry-set each basin against the completed wall finish to confirm height, level and tap-hole alignment with the pipework already installed.
SANTERSON lists installation and after-sales support, including on-site installation, inspection and snags, warranty coverage and spare parts. Treat response times and warranty terms as commercial items to be written into your contract for this project — ask what the warranty covers for glaze and for the wall fixing, how a claim is raised from your country, and whether spares for a discontinued model remain available years later.
Ordering sequence that keeps a project on schedule
- Fix the layout and services drawings first: basin height, mixer position, waste route, wall substrate.
- Request the current technical data sheet for 1051B plus matching 1051 pieces, and check every dimension against those drawings.
- Order one sample basin and one matching WC; approve glaze colour, tap-hole position and fixing detail in person or on video call.
- Issue the purchase order with rough-in figures, packing standard and inspection points stated on its face.
- Book pre-shipment inspection at the agreed point; require photographs of packed cartons and the batch sample test.
- Confirm Incoterms, insurance and who clears customs before production starts, not after the container sails.
- Inspect and photograph on arrival, store sealed and dry, then dry-set before fixing.
If your project also needs bespoke joinery or branded pieces alongside the ceramics, ask about custom furniture manufacturing at the enquiry stage — material and finish choices are easier to coordinate when one factory plans the bathroom cabinetry and the basins against the same set-out drawings.
Send your drawings with the enquiry
Before you request a price for 1051B or any other wall-hung basin, send the bathroom layout, the wall construction detail and your required rough-in dimensions. SANTERSON is a China furniture and building materials manufacturer working from project briefs on villa, hospitality and office fit-outs; published case references include villas in Willoughby, Perth, North Turramurra, Melbourne and Sydney — see the project cases and the contact page.
Enquiries: PHILLIP, +86-13928214007 (phone/WhatsApp), santerson@qq.com.