On a specification sheet, Washdown One Piece Toilet 1004A, Modern Ceramic Bathroom Toilet looks simple: vitreous ceramic, one-piece body, washdown flush. The differences between bids usually hide in the four lines nobody reads closely — glaze formulation, trap type and rough-in dimension, flushing hardware, and the finish grade that has to survive housekeeping for ten years instead of ten weeks. This guide walks through each of those items so a buyer, specifier or contractor can compare 1004A against its sibling models on the same terms, and write a purchase order that leaves nothing for the site team to argue about.
Start With the Body: One-Piece Versus Two-Piece Construction
The 1004A is a one-piece toilet, meaning the cistern and pan are cast and fired as a single unit. That construction choice drives cleaning, servicing and appearance, so it is the first thing to compare.
- Cleaning. With no joint between tank and bowl there is no crevice for dust, limescale and damp to collect in. On a hotel or serviced-apartment floor this removes one recurring task from the daily room-attendant routine.
- Hygiene. The sealed junction also removes the damp gap where bacteria typically build up on a two-piece unit.
- Profile. A one-piece body reads as a single clean form, which is why it suits the minimalist bathrooms specified for villas and boutique hotels.
For comparison, our Two Piece Washdown Toilet 1038A is also vitreous china with the same P-trap and S-trap flexibility, and it is a legitimate choice where budget per unit matters more than seamless cleaning. Where we specify one-piece bodies is in high-turnover guest bathrooms and in villa projects where the join line would be visible from the doorway.
If the design calls for the pan to sit off the floor, that is a different product family: Wall Hung Toilet 1038W uses a concealed cistern and P-trap wall drainage, which leaves the floor clear for mopping and keeps a compact footprint in small bathrooms.
Compare the Ceramic Body and the Glaze, Not Just the Word "Ceramic"
Every supplier writes "ceramic" on the sheet. The variables that decide whether a pan still looks new after years of scrubbing are density and glaze quality.
- Vitreous body. The 1004A is made from high-quality vitreous ceramic. A dense, well-fired body absorbs little water, which is what keeps odour and staining from developing inside the ware over time.
- Dense glossy glaze. The glaze on 1004A is specified to resist stains, limescale and yellowing. When comparing quotations, ask how each supplier describes the glaze system and whether it is a single application or a layered one — that difference shows up as dulling around the waterline.
- Inspection points on a sample. Look for even glaze coverage on hidden faces and under the rim, no pinholes or orange-peel texture, and consistent colour across the cistern lid and the pan. A sample that passes these checks is worth more than any adjective in a catalogue.
All of our one-piece models in this range share the same dense-glaze approach, so on materials alone they are close equivalents. The comparison then moves to shape and finish detail — which is where 1004A, 1003A and 1050A actually part company.
Match the Trap Type and Rough-In Before You Compare Style
This is the specification item that causes the most rework, because a beautiful pan that does not line up with the waste is a return, not an installation.
| Drain type | Where the waste goes | Rough-in on 1004A |
|---|---|---|
| P-trap | Wall outlet, horizontal into the soil stack | 180 mm from finished floor/wall setting-out |
| S-trap | Floor outlet, vertical down through the slab | 250 mm centre of the waste |
The 1004A is offered with both options, which lets one model serve a mix of room types in the same project — older buildings with floor wastes and new-build bathrooms with wall wastes. Two rules we apply on every order:
- Confirm the trap type per room type from the plumbing drawings before quantities are split, not after the container is booked.
- Confirm finished floor level. The rough-in dimension applies once tiling and waterproofing are complete, so a slab-stage measurement will be wrong by the thickness of the screed and tile bed.
Read the Flushing System Line Properly
The 1004A uses a washdown flushing mechanism: a strong, direct wash of water into the bowl that clears in one pass while keeping water use economical. When you compare flushing specs across models or suppliers, look at four things rather than the headline word:
- Flush volume and how it is metered — single or dual actuation, and whether the cistern hardware is matched to that volume.
- Rim and trapway design — a fully glazed trapway is what prevents recurring blockages in heavy-use restrooms.
- Seat and cover — confirm whether the seat, soft-close mechanism and fixing set are included in the quoted price or added separately. This alone can swing a comparison between two suppliers.
- Spare-part availability — cistern mechanisms wear out first. Ask which mechanism is fitted and whether replacements are supplied for the life of the project warranty.
On projects where restrooms are cleaned by contract staff several times a day, flush reliability and glaze durability matter more than any stylistic detail — so we always recommend settling those two items first, then choosing the silhouette.
Choose the Finish Grade to Match the Project, Not the Showroom
Within this one-piece range the visible choice is between a plain white contemporary form and a decorated premium finish. Comparing them on price per unit alone usually leads to the wrong call; compare them on the room they belong in.
| Model | Form and finish | Where it works best |
|---|---|---|
| Washdown One Piece Toilet 1004A | Square silhouette with softened corners, plain glossy white glaze | Guest bathrooms and principal ensuites on villa and apartment projects; commercial restroom upgrades |
| Washdown One Piece Toilet 1003A | Minimalist modern styling, seamless one-piece body, glossy glaze | Volume guest bathrooms and shared family or staff bathrooms where the design language is understated |
| Washdown One Piece Toilet 1050A | Clean square shape with a gold line inlay, premium vitreous china | Master suites, boutique hotel feature bathrooms and high-end commercial washrooms |
| Washdown One Piece Toilet 1051A | Soft rounded silhouette, stain-resistant glaze | Projects specifying the full 1051 suite, where basins and wall-hung WC must match exactly |
A practical way to allocate them: use 1004A as the default specification across the majority of bathrooms because it is neutral enough to sit against timber, stone-look and painted joinery alike; reserve the gold-line 1050A for the rooms a buyer or guest actually photographs; and keep 1003A for the shared and back-of-house bathrooms where the design intent is quiet.
Coordinate the Suite Around It
Ceramics bought one line at a time are the usual reason a finished bathroom looks assembled rather than designed. The 1050 and 1051 collections are built as matching sets, so basins, wall-hung WCs and pedestal basins can be ordered in one specification rather than matched by eye on site.
For the 1050 line that means pairing with the Wall Hung Ceramic Basin 1050WB or the freestanding stand basin, and for the 1051 line with the Wall Hung Ceramic Basin 1051B. Where a project mixes ranges across room types, group the order by suite so that glaze tone, seat profile and hardware finish stay consistent within each bathroom.
Because we also supply the surrounding interior fixtures — vanities, basins, shower systems, lighting and cabinetry — specifying ceramics early lets us align the whole bathroom package to one delivery schedule instead of chasing separate lead times.
A Buyer's Comparison Checklist for 1004A
- Body type confirmed as one-piece, with the cleaning and hygiene reasoning recorded in the specification note.
- Trap type and rough-in stated per room type on the plumbing drawing, checked against finished floor levels.
- Glaze system described in writing, not just "ceramic", plus a physical sample approved before production.
- Flush mechanism identified by type, with seat, cover and fixings either included or priced explicitly.
- Finish grade allocated by room type across the project, with one default range and limited feature upgrades.
- Matching basins and WCs specified in the same order so glaze tone and hardware match.
- Spare-part route agreed for cistern mechanisms and seats before handover.
Assembling that information is where a Bathroom Fixtures for Hotel Projects specification earns its keep: once the ceramics are settled on these terms, joinery, worktops and shower systems can be matched to them rather than negotiated around them.
SANTERSON has manufactured furniture and building materials since 2008 and supplies ceramic sanitary ware as part of a one-stop package for villa, hospitality and office projects — from material selection and custom/OEM work through door-to-door delivery, installation support and after-sales service. Send us the bathroom schedule or the drawings and we will confirm trap options, glaze samples and a matched suite specification for your project.
Contact PHILLIP | Phone / WhatsApp: +86-13928214007 | Email: santerson@qq.com