If you are specifying poolside furniture for a resort, hotel deck or private villa, the Rope Weave Outdoor Chaise Lounge & Round Daybed with Teak Armrest is one of the pieces worth putting on your shortlist. The question that usually comes next from a procurement team is not whether the design works — it does — but how an OEM order for this set actually gets placed, checked and delivered. This article walks through that process stage by stage, using this collection as the running example.

What the standard product already gives you

The catalogue version of this set pairs adjustable rope chaise loungers with a generous round outdoor daybed. The loungers support multiple recline angles for sunbathing and resting, while the daybed works as a social relaxation point at the centre of a lounge zone. Both pieces share the same rope weave and teak arm detail that runs through the wider coastal collection.

The frame is aluminium rather than steel or solid timber, which matters on coastal sites where salt air is a constant factor; the manufacturer describes the frame as built to withstand seaside salt air. Cushions are specified in an outdoor-grade performance fabric. For a buyer, that combination means the base specification already suits hotel pool decks, beach resorts and villa poolside terraces — so OEM work starts from a proven design instead of a blank sheet.

Step 1: Send drawings, not just photographs

The single most useful thing you can send on an enquiry is dimensioned information: layout drawings, deck elevations, the clear width between planters or balustrades, and the number of loungers and daybeds per zone. A photograph tells a factory what you like; a drawing tells it what has to fit.

Useful items to include at this stage:

  • Set quantities by location — for example, pool deck, cabana zone, villa terrace, each with its own count of loungers and daybeds.
  • Target overall dimensions, including the diameter you need for the round daybed and the recline positions you want on the loungers.
  • Any constraint on armrest width or nesting footprint, since the teak arm detail affects how closely pieces can be spaced.
  • The reference product link, so the factory is quoting against a known configuration rather than an interpretation.

Step 2: Decide which elements you are actually changing

OEM work on this type of set normally sits in one of three bands, and the band you choose drives both cost and lead time. Being explicit about it prevents a quotation that answers a question you did not ask.

  • Finish and fabric changes only. Cushion fabric, cushion colour, accent pillows, frame powder-coat colour and teak finish or staining. The product page notes that custom cushion fabrics, accent pillows and frame colours can be arranged for hospitality projects, so this is the lowest-friction route.
  • Specification changes within the same design language. Rope colour and weave density, seat height, daybed mattress thickness, adding or removing a casting or base plate for fixed deck installation.
  • Full OEM or private-label manufacturing. Your brand on the product and packaging, with your own drawings. The Custom & OEM Service covers custom furniture design and prototyping, bespoke material finishes and textures, OEM manufacturing, flexible minimum order quantities and brand customisation including engraving, embossing, logos and packaging.

For most hospitality projects, band one plus a small piece of band two delivers a coordinated look without opening a tooling conversation. Ask the factory to confirm which options are available for this specific collection before you commit a finish schedule to a specification document.

Step 3: Agree prototyping and sign-off before volume

The Custom & OEM process described on the site includes 3D modelling and prototyping. On a rope weave piece, that step is where you verify the things photographs never reveal: how tight the weave sits at the corners, whether the teak armrest is solid or capped, how the recline mechanism feels under load, and how firm the daybed cushion reads once it is dressed with outdoor bedding.

Treat the sample as a test artefact, not a gift. Write down what you are testing before it ships — weave tension, weld finish at hidden joints, colour match against your fabric and timber samples, cushion rebound after a week of use — and photograph the piece on arrival so both sides are looking at the same evidence when you discuss revisions.

Step 4: Lock down quantities, packaging and the order schedule

Flexible minimum order quantities are listed as part of the custom and OEM service, which is helpful for phased projects — a pool deck in phase one, a beachfront terrace in phase two. Confirm the minimum per configuration rather than per collection, because a lounger run and a single round daybed rarely share an MOQ.

Packaging belongs in the same conversation as quantity. Outdoor pieces travel awkwardly: round daybed frames, long lounger chassis and teak components each need protection suited to sea freight, and cushion sets need bags that keep salt water and handling grime off the fabric. Ask for a packing list per container showing which cartons belong to which zone, because it changes unloading from a two-day sort into an afternoon job.

Step 5: Quality control points you should name in the order

Rather than accepting a generic inspection clause, specify what gets checked on this product type:

  • Frame: weld finish and coating continuity at joints, and consistency of the powder-coat colour across a batch.
  • Rope weave: even tension, no slack at the seat span, and matching rope lot numbers within one zone so colours do not drift between units.
  • Teak armrests: moisture content and finish at delivery, since teak details are where handling damage shows first.
  • Cushions: fabric colour against your approved swatch, zip operation, and quick-dry foam construction for a poolside environment.
  • Recline mechanism: every angle position tested on a sample from the production run, not only from the pre-production sample.

Step 6: Freight, documents and arrival

The logistics service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery, with documents such as commercial invoices, packing lists, certificates of origin and import permits. For an outdoor furniture order this is where a well-prepared supplier saves you real money: correct carton dimensions and weights mean better cube utilisation, and complete paperwork means the consignment does not sit at the port while someone chases a certificate.

Confirm the shipping terms, insurance scope and delivery address for each site in writing. Import duties, taxes and any local requirements depend on the destination and current rules, so have your own customs broker verify those figures against your invoice rather than relying on anything stated in marketing material.

Step 7: Installation, handover and spares

Installation and after-sales support covers on-site installation, inspection and snags, warranty coverage, spare parts or replacement, and ongoing maintenance. For poolside furniture the practical value is in the snag list and the spares plan: rope sections, cushion sets and teak components are the items you will want to reorder years later, so agree part references at handover and keep the approved fabric swatch on file with your FF&E documentation.

How this fits a wider project package

Very few projects buy only chaise loungers. The same rope weave and teak arm design language continues across the collection — Rope Weave Outdoor Sofa Set with Teak Armrest & Nesting Coffee Tables and Rope Weave Outdoor Dining Set & Bar Table Stool Set with Teak Armrest — so a single OEM conversation can carry the finish schedule across seating, dining and lounging zones. That consistency is one of the clearer arguments for consolidating with a one-stop furniture and building materials supplier: fewer suppliers reconciling finishes, and one production schedule to track.

For projects in Australia, this also means grouping outdoor pieces with the interior items that arrive at the same site — flooring, wall panels, cabinetry, lighting and bathroom fixtures. Furniture sourcing for Australian projects is easier to control when the outdoor and interior scopes are coordinated by one team rather than compared across several quotations.

A practical checklist before you commit

  • Confirm which customisation bands are open for this collection, in writing, with prices attached to each option.
  • Get one sample of the lounger and one of the daybed before signing a volume order.
  • Fix rope lot, fabric reference, frame colour and teak finish as named references, not photographs.
  • Ask for MOQ per configuration and a phased delivery option if the project opens in stages.
  • Agree the inspection points above as part of the purchase order.
  • Have your broker verify duty and tax treatment on your commercial invoice.

If you are specifying poolside furniture for a resort, hotel or villa project and want a quotation against this collection — including custom cushion fabrics, frame colours and accent pillows — the SANTERSON team can advise on configuration, sampling and delivery. Details and enquiries are on the contact page.