A decorative wall panel can transform a tired bedroom or living room wall in a day, yet most problems on site do not come from the panel itself. They come from an installation plan that was never finished. Before you order panels for a home project, the plan should already answer six questions: which wall is being covered, what the substrate looks like when the goods arrive, how the sheets will be fixed and cut, where the edges and corners close, what sits behind the panel, and who signs off on the sizes that were measured on site.

1. The scope: which wall, which room, which finish

Write the scope down per wall, not per room. A villa living area is rarely one flat surface; it is a television background, a return wall with a doorway, a niche and often a ceiling reveal. Each of those needs its own panel type and its own detail.

  • Feature wall behind seating or a bed. Flat or relief surfaces read best here, and this is where decorative wall panel for interior home decoration options with stain-resistant, wipe-clean surfaces are usually specified.
  • Television or media background. Panel alone is not enough; the screen position, cable route and any lighting need to be planned at the same time. See integrated TV panels when the panel and the joinery must be resolved as one system.
  • Curved walls, arches and columns. Rigid sheets will not wrap a radius. A bendable cladding such as MCM flexible travertine stone veneer is cut and bonded to the curve instead of framed out.
  • Wet or humid rooms. Moisture resistance matters more than appearance. Confirm with the supplier which finishes are acceptable for the room in question before the order is placed.
  • Doors inside a panelled surface. If a doorway crosses the wall, decide early whether the leaf will be concealed so the pattern continues across it.

2. A measured drawing, not a room area

Panel quantities are quoted from sheet sizes, and a room area taken from a floor plan is not the same thing. The plan should show each elevation with finished floor level marked, overall width and height, the position of skirting, architraves, switches, sockets, radiators and any coving, plus the direction of the grain or pattern.

Ask the supplier to confirm whether they measure on site or work from your drawings. Where a full solution is arranged, measurement, 3D rendering, manufacturing and installation are handled as one package — the approach used for arched niche and full house custom wall cabinet projects, where panel shapes and storage layout are set together before anything is cut.

Two numbers are worth locking down in writing: the sheet size you will receive and the module grid that follows from it. Everything else — joint positions, switch cut-outs, the last board at an inside corner — falls out of those two.

3. Substrate condition and what happens before the panels arrive

Most panel types are bonded to a sound, flat, dry base. A plan that ignores the substrate is the single most common cause of rework.

Check on siteWhat the plan should state
Existing plaster, paint or wallpaperWhether it is stripped, repaired or over-boarded, and who does it
Flatness across the wallHow local hollows are made good, and whether a batten system is used instead of direct bonding
MoistureRising or lateral damp must be resolved before cladding covers it
Adhesive compatibilityFixing method confirmed by the panel supplier for the base you actually have — cement render, plasterboard or timber battens take different adhesives
Room temperature and ventilationWorking conditions during fixing and curing

Flexible mineral sheets are commonly bonded straight to cement bases or plasterboard with tile adhesive and cut on site with simple hand tools, which keeps the sequence short — but that only holds when the base is genuinely sound.

4. Layout, cuts and expansion allowance

The plan should show where full sheets start and where the cut pieces land. Cut pieces at eye level or in the main sight line look careless; put them in corners and behind furniture.

  • Mark a setting-out line from a datum, so cuts are split evenly between both ends of the wall rather than dumped on one side.
  • Note joint treatment: butt joints, moulded trims or deliberate shadow gaps. This decision changes the drawing, not just the shopping list.
  • Leave perimeter allowance where the material is expected to move with temperature and humidity, and state what covers it.
  • Record which side of each sheet faces out before cutting, particularly for wood-grain and stone-effect surfaces that have a visible direction.

For relief surfaces, order a little beyond the calculated area. Patterned sheets need to run with the repeat, and off-cuts from one wall rarely fit the next.

5. Services, lighting and acoustic needs behind the panel

Once a wall is clad, chasing it later is expensive. The installation plan should carry an electrical and services layer that was agreed before production.

  • Socket, switch and data positions with exact offsets from the setting-out line.
  • Cable routes and any conduit behind the panels, plus access points for equipment that needs servicing.
  • Lighting: concealed strips in niches, or a lit background. Where light sits inside the wall build-up, backlit feature walls are specified with the panel from the start so the driver position and heat allowance are resolved.
  • Acoustic treatment. In a home cinema, study or bedroom facing traffic, panels that also absorb sound are chosen at specification stage — see acoustic panels.
  • TV mounting and speaker positions, including the reinforcement needed behind the panel to carry the load.

6. Edge, corner and transition details

The visible quality of a clad wall is decided at its edges. The plan should name a solution for each termination:

  • Inside and outside corners — moulded external and internal angles, or mitred sheets.
  • Meeting lines with flooring, ceiling and window reveals — which material stops where, and whether a trim covers the gap.
  • Doors set into the panelling — decorative concealed doors keep the surface continuous when a doorway has to sit inside the pattern.
  • Storage built into the same wall — full height storage walls let wardrobes and display niches disappear into the clad surface instead of reading as separate furniture.
  • Fireplace surrounds, radiators and any heat source that touches the cladding.

7. Materials, finishes and supply sequence

A short comparison helps buyers fix a specification before they compare prices. The panel families below are all listed on the site; performance figures should be confirmed against the current specification sheet for the exact article you order.

Panel familyWhere it is used in a homePoints to confirm before ordering
Modern decorative wall panel for interior decorationLiving rooms, bedroom backgrounds, home office; surfaces that imitate stone, wood or fabricCustom size, colour and pattern; site cutting method; finish durability in the room concerned
Luxury decorative 3D wall panelFeature walls where relief and shadow are the design pointCutting and joint treatment for a relief face; lighting angle across the pattern
Textured panels and matte lacquer panelsWhole-room wall systems coordinated with joineryMade-to-measure sizing, finish selection and layout for each elevation
Stone and marble panelsHallways, bathrooms, feature surfacesSubstrate fixing method and joint detail for heavier sheet formats
Flexible wood grain cement wall panelCurved walls, arches, renovation over existing masonry, external as well as internal useBase preparation, adhesive type and whether the raw surface is to be painted on site
Aluminium honeycomb panelMostly commercial facades and interior cladding; occasionally a large-format residential featurePanel format, flatness requirement and fixing system for the span involved

Then set the supply sequence: sample approval, measured order, production, delivery date, storage on site, installation window. Panels delivered to a damp building before the plaster has dried is an avoidable mistake — keep sheets flat, indoors and acclimatising until they are needed.

8. Who does what, and how the work is signed off

The plan should end with a responsibility list. Panel suppliers who also handle measurement, production coordination and on-site guidance take several of these lines themselves; where they do not, your trades must.

  • Site measurement and confirmation of dimensions against the finished floor and ceiling levels.
  • Substrate preparation and any first-fix electrical.
  • Delivery, inspection on arrival and reporting of damage or shade variation before fixing begins.
  • Fixing, cutting, joint treatment and trim installation.
  • Final inspection with the client, snag list, and a record of the exact finish codes and batch numbers used, so a later repair matches.
A practical test before you place the order: can every number on the drawing be traced back to a measurement taken on site, and does every edge on that wall have a named detail? If either answer is no, the plan is not finished.

Ordering from one supplier

Wall panels rarely stay alone on a purchase list. Flooring, doors, joinery and lighting all meet the same wall, and splitting them across several vendors is where dimensions start to disagree. Buying through a wall panel and cladding range that also covers cabinetry, doors and flooring keeps one party accountable for those junctions. SANTERSON works as a one-stop furniture and building materials supplier, supplying custom sizes and finishes with freight arranged to site.

Send the room elevations, the fixing substrate and the finish you have approved, and we will return a measured panel schedule with a quotation. For enquiries about home or villa projects, contact SANTERSON — Contact Us.