An integrated basin looks simple on a drawing: one surface, one bowl, no visible joint. That simplicity is exactly why it is easy to specify badly. The number of decision points behind a single piece — slab source, block thickness, waste from the cut-out, drainage falls, tap and overflow provision, access to the trap, how the vanity carcass carries the stone — is higher than for a ceramic bowl dropped onto a pre-made top. For buyers sourcing for villas, hotels and apartments in Australia and elsewhere, this article sets out what to verify before you place an order, using our own Integrated Basin in the Countertops & Basins collection as the worked example.
What an integrated basin actually is, and where it sits in the range
An integrated basin is carved from the same block or slab as the countertop around it. The deck, the rim and the bowl are one material and one colour, so there is no silicone line to yellow and no lip to trap limescale. That is the whole argument for specifying it — and the whole reason the price and the lead time behave differently from standard ceramic ware.
Within our bathroom range the integrated basin sits alongside three other ways of pairing a bowl with a top, and knowing which one you are actually quoting matters when you compare prices between suppliers:
| Type | How it meets the countertop | What that means for the buyer |
|---|---|---|
| Integrated Basin | Bowl and top are one piece of the same material. | Seamless look; sized and finished to the project, so it is quoted per job rather than off the shelf. |
| Undermount Basin | Bowl fixed beneath a cut-out in the top. | Wipe water straight into the bowl; cut-out must match the basin template exactly. |
| Vessel Basin (Above Counter) | Bowl sits on top of the deck. | Strong visual statement; overall wash height rises, so tap spout reach and height need checking together. |
| Double Basin Countertop | Two bowls set into one long top. | Shared deck for two users; basin spacing and waste positions have to be settled before the top is cut. |
If you want the seamless surface but need a cabinet under it, the Integrated Countertop Vanity combines the top and the carcass as one specification instead of two trades meeting on site.
Decision one: material and finish, chosen for the traffic it will see
Integrated basins are made to order in stone and engineered surfaces, so the material decision is really a maintenance decision. In our Stone & Marble Surfaces range, sizing and material/finish are specified per project rather than fixed to one catalogue option.
For a family bathroom or powder room, natural marble gives the veining and depth people choose integrated basins for. It is also the most reactive choice: acidic cosmetics and citrus can etch a polished surface, so ask which finish you are being quoted — honed hides marks far better than high polish in a shared bathroom.
For guest bathrooms in a hotel, serviced apartments or any room cleaned by staff on a fixed rota, engineered stone and ceramic-grade surfaces are usually the safer specification. Cleaners will use what is under the sink, not what the specification sheet says, so a surface that tolerates ordinary bathroom cleaners protects the asset over years of turnover.
Whatever you choose, ask for the finish to be stated on the order: slab or block reference, polish level, whether the bowl interior is the same finish as the deck, and whether a sealer is applied before shipping. Those four lines remove most of the arguments at handover.
Decision two: dimensions and waste — the part that cannot be fixed on site
Our integrated basins are made-to-measure, with layout tailored to the project. That flexibility is an advantage until someone assumes the drainage can follow the design. It usually cannot.
- Confirm overall top dimensions and front-to-back depth against the finished wall face, not the structural wall — tiling and waterproofing typically consume 20–40 mm.
- Confirm bowl position, bowl length, width and internal depth, and where the front edge of the bowl sits relative to the deck edge. A shallow deck leaves no room for soap and glasses; a deep bowl with a wide rim wastes stone.
- Send the waste and overflow positions to your plumber before manufacture, and confirm whether the trap is offset or vertical. In a wall-hung or floating vanity, an offset waste changes what the carcass can look like.
- Check tap hole count and position — single lever, wall-mounted spout, or deck-mounted mixer with separate hand shower all sit differently in the stone. Wall-mounted taps need the rough-in set before the top is templated.
- Confirm how the piece is supported, and that access to the waste exists after installation. Once an integrated bowl is cut, there is no second attempt.
Practical rule for buyers: do not release an integrated basin order until you have a dimensioned drawing showing the top outline, bowl outline, waste centre, overflow position and tap holes, signed off by the plumber on site. Every dispute we see in this category traces back to one of those five items being assumed rather than drawn.
Decision three: matching it to the vanity and the rest of the bathroom
The basin is only one line in a bathroom package. Decide the whole wet wall together and you avoid two suppliers blaming each other for a gap.
For storage under the wash area, specify the Single Vanity or the Double Vanity at the same time as the top, so drawer fronts, carcass depth and the plumb void are coordinated. The Floating Vanity is the usual choice in compact ensuites because it keeps floor visible and leaves the trap accessible from below.
Mirror cabinets, shelving and Vanity Lighting also affect the basin decision: a mirror cabinet's door swing can collide with a tall vessel tap, and lighting position decides how much shadow falls across the bowl. Where the whole sanitary wall matters — hotels, apartments, multi-unit residential — grouping these as one Bathroom Sanitary Fixtures package is simpler than buying each item separately.
If a project needs the wash area to match across many rooms, our matched ceramic series travel together: the 1050 Gold Line pieces — such as the Freestanding Pedestal Basin 1050B and the matching Wall Hung Ceramic Basin 1050WB — are specified as a suite, which is often the cheaper route for guest bathrooms while the master bathroom carries the integrated stone basin.
Decision four: sourcing route, packaging and who installs it
Made-to-measure stone is unforgiving of poor logistics. Ask explicitly how the basin is crated — full timber crate with the bowl supported on a padded bearing across its whole underside, not just at the edges — because a hairline crack found after installation is nobody's warranty claim.
We handle this as part of one package rather than leaving it to the buyer. Our One-stop Solution covers design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover. Our Custom & OEM Service covers bespoke finishes and dimensions where a project needs something outside the standard catalogue, and our Logistics & Door-to-Door Delivery service covers freight forwarding by sea, air and rail with customs paperwork and container loading. Fit-out is completed through Installation & After-sales Support.
For Australian buyers specifically, we have published project work in Willoughby, Perth, North Turramurra, Melbourne and Sydney — see Project Cases. Freight terms, duties, insurance and transit time are quoted per shipment rather than guaranteed as a standard service level, so ask for them in writing against your own address.
Five questions to put to any supplier before you sign
- Is the bowl machined from the same block as the deck, or is a separate bowl bonded in and blended? Both exist; only one is seamless.
- What is the minimum thickness under the bowl floor, and what support is specified beneath it?
- Are the waste and overflow supplied with the basin, or do you source them locally to match your plumbing?
- Which finish and sealer are applied at the factory, and what cleaning products does the warranty expect?
- What happens if the piece is damaged in transit — who inspects it, on what date, and against which photographs?
A supplier who answers these five with drawings and written specifications is worth more than one with a lower price and no detail. Integrated basins are bought once per project; the cost of getting them wrong is measured in re-poured stone and a delayed handover.
Frequently asked questions
Are integrated basins only available in stone?
Our Countertops & Basins range specifies integrated basins as made-to-measure pieces with material and finish options selected per project, including the surfaces in our Stone & Marble Surfaces range. Send us your preferred surface and we confirm what can be machined as a single-piece bowl at that thickness.
Can I order one integrated basin for a single bathroom, not a whole project?
Yes. The product is specified per space — finish, layout and dimensions are set to the room — so a single ensuite is quoted the same way as a multi-unit job. Minimum order quantities are confirmed at quotation stage.
What lead time should I plan around?
Because the piece is made to your dimensions and finish, it enters production after drawings are confirmed rather than shipping from stock. We give a dated schedule with your quotation once the specification is signed off, and we recommend placing the basin order before wall linings and tiling are fixed so plumbing can follow the drawing.
Do you supply the tapware and waste with it?
Tell us the tapware and waste you intend to use and we machine the holes and cut-outs to suit them. If you prefer local hardware, send the make and model so hole diameter and spacing are right first time.
Send us your bathroom drawings
Share the vanity layout, waste position and preferred surface, and we will quote an integrated basin machined to those dimensions — as a single piece or as part of a wider bathroom fixtures package for your project.
Contact PHILLIP by phone or WhatsApp on +86-13928214007, email santerson@qq.com, or ask through the enquiry form on our website. Office hours are Monday to Saturday, 8:00 AM–6:00 PM (GMT+8).