A pool deck order rarely fails because of the weave. It fails because the specification stopped at a photograph. When a resort, villa or hotel project specifies a rope weave outdoor chaise lounge and round daybed with teak armrest, the supplier needs numbers, finishes and quantities — not adjectives. As a China furniture manufacturer working on overseas villa and hospitality projects, we see the difference between a clean build sheet and a vague one in every shipment that leaves the factory. This guide walks through the fields we ask buyers to fill in before a quotation is issued, so the loungers, the daybed and the cushions that arrive actually match what was drawn on the landscape plan.
Start with the piece list, not the mood board
The collection covers more than one item. The chaise lounger reclines through several positions for sunbathing and resting, while the round daybed works as a shared relaxation spot for two or three people. Most poolside schemes we quote combine them with other pieces from the same design language — a rope weave outdoor sofa set with teak armrest and nesting coffee tables for the lounge zone, or a rope weave outdoor dining set and bar table stool set for the terrace kitchen.
Write each item on its own line with a quantity, a placement (pool deck, cabana, beach front, guest villa terrace) and a target delivery window per location. Grouping everything under "outdoor furniture, 40 pcs" is how projects end up with loungers in the wrong service area.
Frame and structure: what to state in writing
The frame of this set is aluminium, described as built for seaside salt air. In a specification, that general statement needs to become project-specific decisions:
- Frame profile and dimensions. Overall width, depth and seat height for the lounger; diameter and mattress height for the round daybed. Give the maximum footprint, not the visual one, so the landscape architect can set out spacing between rows.
- Finish system. Powder coating colour by manufacturer code or RAL reference, plus a sample requirement before production runs. State whether frames in covered and uncovered areas share one finish.
- Load and use class. Confirm the daybed is specified for guest use rather than stacked storage, and note any fixed fixing requirement on decks or pavers.
If part of the site needs a simpler, higher-turnover lounger instead — a sling mesh sunbed with adjustable backrest for a busy public pool — say so in the same document. Mixing product families by zone is normal; mixing them silently inside one line item is what causes change orders.
Rope weave: colour, pattern and the sample gate
Rope is the most visible part of the specification and the easiest to leave vague. "Grey rope" means nothing across two factories. Specify:
- Weave direction. This collection uses vertical rope weaving for a light, breathable coastal look; confirm whether that pattern applies to backrests only or wraps the arms as well.
- Rope type and diameter. Round or flat profile, and the thickness of the strand. Fine rope reads formal; thick rope reads casual and hides foot traffic wear better.
- Colour reference. Give a brand code or send a physical chip from the project's palette, and require one pre-production sample per rope colour before the batch is cut.
Tightness of weave and the join detail at corners are worth a line too. A woven bench in the same family — the all-weather woven two-seater rope loveseat — is often specified for foyers and viewing terraces where no cushions are wanted, and its weave detail should match the pool pieces if they appear in one sightline.
Teak armrest: solid timber or matched veneer
The teak arm detail is what ties the collection together across loungers, daybed and dining chairs. Decide and record:
- Construction. Solid teak arm caps or a teak-faced substrate — both look right on site, they age differently and price differently.
- Surface treatment at delivery. Natural weathering grey, or oiled to hold the honey tone until the first maintenance cycle. State who performs that maintenance after handover.
- Dimension tolerance. Arm width and the overhang beyond the frame, so teak caps align when pieces from two production batches sit side by side.
Cushions: fabric code, filling and spare strategy
Cushions on this set use outdoor-grade performance fabric, and the fabric, accent pillows and colours can be customised for hospitality projects. Turn that into a line-by-line schedule:
- Fabric manufacturer, range and colour code per component (seat pad, back pad, bolsters, accent pillows).
- Filling type and whether quick-dry foam is required for pieces exposed to splash or rain.
- Cover construction: zip position, whether covers are removable for laundering, and a spare-cover quantity per pool zone.
- Contrast piping or none, and the accent pillow count per daybed rather than "as styled".
Ordering spares with the initial batch costs little; sourcing a matching fabric two seasons later is where outdoor programmes stall.
Compatibility with the rest of the pool deck
Loungers never arrive alone. In the same document, list what they must sit beside: parasols and cabanas, pergolas or hardtop shade structures, side tables, storage for stacked cushions, and any wet-edge or drainage line the legs must clear. Where a project has both leisure and dining terraces, note which pieces need to share teak tones with aluminium outdoor dining sets with teak accents so the timber reads as one decision across the site.
Custom and OEM options to name in the specification
Where a standard catalogue item is close but not exact, our custom and OEM service covers bespoke finishes and textures, prototyping before series production, flexible minimum order quantities and brand marking such as engraving or logos. Practical requests we handle for rope weave collections include modified daybed diameters for tight terraces, alternative recline mechanisms on the lounger, project-specific frame colours, and monogrammed or colour-matched cushion covers. Projects that need a matching conversation set rather than a poolside layout can take the same weave into metal rope curved outdoor sectional sofa with teak armrest for lounge and cabana areas.
Delivery, installation and after-sales fields
Finish the specification with the commercial section so nothing is assumed at contract stage: packing standard and container loading plan, delivery address per site, door-to-door delivery scope and who acts as importer of record, assembly required on arrival, and installation and after-sales support covering warranty terms and spare parts supply. For villa and hospitality projects in Australia we confirm import terms, duties and delivery scope case by case rather than quoting a blanket service level.
A short specification checklist
- Item-by-item quantities and placement per zone
- Frame dimensions, finish code and pre-production sample gate
- Rope profile, weave direction and colour reference
- Teak arm construction, delivery finish and tolerance
- Cushion fabric codes, filling, cover construction and spares
- Compatibility notes with shade structures and adjacent collections
- Custom/OEM changes requested, with MOQ confirmed
- Packing, freight scope, installation and warranty terms
A specification that answers these eight points before the enquiry is issued usually comes back as one clean quotation with no open questions. Send us the piece list and the palette, and we will return a build sheet for the loungers, the round daybed and everything woven beside them.
SANTERSON — furniture and building materials manufacturer, Foshan, China. Enquiries: santerson@qq.com · Phone/WhatsApp: +86-13928214007 (PHILLIP) · Contact page