When a project team starts comparing ceramic WCs, the model number usually settles first and the specification work starts afterwards. If you are sourcing the Washdown One Piece Toilet 1004A for villas, hotel guest rooms or a commercial restroom upgrade, the useful comparison is not whether the shape looks modern — every current range does. It is whether the trap type, rough-in dimension, glaze specification and spare-part plan match what your site actually has. The notes below follow the product information published on our site and show what to confirm before an order is placed.
Start With the Drain Layout, Not the Style
The 1004A supports two plumbing arrangements: a P-trap wall drain with a 180 mm rough-in and an S-trap floor drain with a 250 mm rough-in. That single line decides which units you order for each bathroom type, and it is the most common source of rework on sanitary ware orders. New builds let you set the rough-in to suit the fixture; refurbishment work normally does the opposite, because the waste is already in the slab or the wall.
Before quantities are locked, have each bathroom type measured and recorded: drain type (floor or wall), the finished-floor-to-centre distance, and whether the stated figure is taken off the finished surface or the structural slab. Where a project mixes both arrangements — typical in villas that keep one original bathroom and relocate others — split the bill of quantities by trap type instead of ordering one code across the whole building.
What the One-Piece Body Actually Changes
The 1004A is a one-piece unit: tank and bowl are cast as an integrated body, so there is no gap between them for dirt to collect in. For a householder this reads as easier cleaning. For a facilities team it matters more than that — the joint on a two-piece WC is where mould and limescale build up, and it is what a cleaner reaches with a brush every service round. Fewer crevices means shorter cleaning time per unit, which over dozens of guest bathrooms shows up in labour.
Compare that with the Two Piece Washdown Toilet 1038A, which also offers 180 mm P-trap and 250 mm S-trap options. It suits projects where budget drives the decision and where a separate tank section is acceptable. If your comparison sheet only lists price per unit, add a line for cleaning frequency; that is usually where the two-piece option stops looking cheaper.
Glaze and Body: What to Ask the Factory to State
The published description for 1004A describes high-quality vitreous ceramic with a dense glossy glaze that resists staining, limescale and yellowing. Those are the right properties to look for, but they should appear as specification lines on your purchase document rather than as marketing sentences. Ask the supplier to confirm, in writing, the body material, the glaze coverage — whether it extends inside the trapway — and how the units are packed for ocean freight. Glaze quality is judged over years of use, so a written description you can hold the supplier to is worth more than a sample on a showroom shelf.
Flush performance is another line to pin down. The 1004A uses a washdown flushing mechanism, described as strong flushing with good water efficiency. What your document needs is the flush volume paired with the cistern capacity and the minimum working pressure the building will actually deliver at the top floor. A model that performs well on a test rig can underperform once it sits on the highest floor of a mid-rise.
Matching the Toilet to the Rest of the Bathroom
Specifying WCs one model at a time produces bathrooms where the basin, WC and hardware do not sit at consistent heights or share a design language. Where a project has several identical guest bathrooms or a run of hotel rooms, it is easier to spec a coordinated suite. Our 1051 range works this way: the Washdown One Piece Toilet 1051A shares its soft rounded outline with the matching wall-hung and basin pieces, so a specifier fixes one silhouette for the room instead of reconciling three.
The same logic applies to the Freestanding Pedestal Basin 1051S, which fixes to the wall through a back panel and needs no vanity cabinet — a useful saving where joinery is not part of the package. For compact bathrooms, a wall-hung option such as the Wall Hung Toilet 1038W keeps the floor clear and works with a concealed tank, which changes the wall build-up and needs to be agreed with the framing contractor early.
Ordering Quantities, Spares and Lead Time Together
Sanitary ware is rarely the last thing ordered and rarely the last thing installed. Once a model is fixed on the drawings, changes are expensive: tiles, vanity heights and partition settings all reference it. Order to the finished schedule with an allowance for breakage in transit and for units damaged during later site trades, and keep a small number of spare units in store for the maintenance period after handover. A discontinued model with no matching spare becomes a replacement job rather than a repair.
Where a project needs a non-standard element — a different seat, a custom finish on the cistern lid, or branding on the packaging — that is a Custom & OEM Service conversation, and it should happen before production starts, not after. Freight and delivery are arranged alongside production so the units arrive with the rest of the fit-out package rather than sitting on site waiting for a trades slot.
A Short Pre-Order Checklist
- Trap type and rough-in recorded per bathroom type, measured from the finished surface.
- Flush volume and minimum working pressure confirmed against the building's actual supply.
- Glaze coverage and body material stated on the purchase document, not only in the catalogue.
- Seat type, soft-close requirement and spare-seat supply agreed at order.
- Quantities split by trap type, with a breakage allowance and stored spares for after handover.
- Wall build-up confirmed early if any part of the range is wall-hung with a concealed tank.
Send us your bathroom schedule and we will confirm which 1004A configuration fits each waste arrangement, together with pricing and delivery for the full quantity. Dimensions and rough-in figures on this page follow our published product information; confirm them against the current technical data sheet for your order before any setting-out work begins.