A modern decorative wall panel for interior decoration looks simple on a sample board. One large-format sheet, a wood or stone effect surface, and a wall that is finished in a day. The buying decision behind it is not simple at all: you are choosing a wall covering that has to survive transport from another country, sit on a substrate you did not prepare, match join lines across dozens of sheets, and still look right years after handover.

A complete checklist therefore covers far more than the surface pattern. It covers scope, substrate, sheet specification, edge and trim detailing, fixing method, delivery tolerance, and a written confirmation stage before production starts. The sections below walk through each item the way our project team works through it when a villa, hotel or office client asks us to panel their walls.

1. Scope: which walls, and what has to be coordinated with them

Start by listing every wall face that will receive panel, and mark on the drawing what else touches that face. In most projects the panel competes for space with items specified earlier:

  • Recessed lighting, wall sconces and any backlit feature wall wiring that has to sit behind or inside the panel build-up.
  • Switch plates, data outlets, thermostats and access panels that need cut-outs or a relocated position.
  • Doors, architraves, skirting and reveal trims, which decide where the panel starts and stops.
  • Custom cabinetry, wardrobes and vanities that abut the panel, plus the order in which they are installed on site.
  • Fireplace surrounds, joinery niches and display shelving fixed to the same wall.

Write down the room type for each face as well. A bedroom background wall, a hotel lobby, a restaurant wall and a bathroom-adjacent wall do not carry the same requirements around moisture, impact and cleaning, and that changes which product family you should be quoting.

2. Substrate: the item most checklists leave out

Panels are thin, so they follow whatever is behind them. Before you specify a sheet, confirm with the local builder or your site contact:

  • Whether the wall is flat and dry, and whether it needs packing, levelling or a moisture check before any panel goes up.
  • The build-up you are allowed to add. Panel plus batten plus air gap costs depth, and that depth shows up at reveals, door linings and corners.
  • Who prepares the wall. We supply and detail the panel; on-site preparation is normally done by the local builder, and that split should be agreed in writing.
  • The fixing method your local crew will use — adhesive, mechanical fixings to battens, or a combination — since that determines both the flatness tolerance and how easily a damaged sheet can be swapped later.

3. Panel specification: what to pin down before you ask for a price

A quote is only comparable if the specification line is identical on both sides. For each wall, record:

  • Sheet size and thickness, plus the module you want the layout drawn to.
  • Surface effect — stone, wood, fabric or concrete look — and whether the surface is matte, textured or gloss.
  • Whether the wall is straight or curved. Curved walls, arches and columns rule out rigid sheet; that is where a bendable product is specified instead.
  • Corner and edge treatment: external corner trims, mitred edges, shadow gaps or a metal reveal profile.
  • The quantity in square metres, split by wall, plus a cutting allowance agreed with the factory rather than guessed on site.
  • Which side of the sheet is the finished face, and how the pattern runs across adjacent sheets.

4. Matching the product family to the wall

Our wall range is grouped by what the wall actually needs. This mapping saves time in the enquiry stage:

Wall situation What to shortlist Why it fits
Living room, lobby or reception feature wall with a strong surface effect Modern decorative wall panel for interior decoration Surface textures that read as stone, wood or fabric; lightweight sheets cut and assembled on site without a wet trade.
High-use walls in villas, apartments and commercial interiors that get cleaned often Decorative wall panel for interior home decoration Durable, stain-resistant surface that wipes down; specified for humid indoor areas rather than painted or papered walls.
Feature walls where depth and shadow are the design idea — TV walls, headboard walls, lobby accents Luxury decorative 3D wall panel Three-dimensional relief that changes with the lighting angle; custom size, colour and pattern.
Curved walls, arches, columns, and renovation where weight matters Flexible wood grain cement wall panel A bendable mineral sheet with a wood grain face — it wraps curved surfaces that rigid board cannot, and rolls for transport.
Facades and feature walls that need a stone look outdoors as well as in MCM flexible travertine stone veneer Thin, flexible soft stone that replicates natural travertine and is cut on site without heavy equipment.
Facade, curtain wall or large-format commercial cladding Aluminium honeycomb panel for building exterior and interior wall cladding Rigid composite core that stays flat at large sheet sizes, with stone veneer, coated or perforated face options.
Lobbies, meeting rooms and apartments where reverberation is the real problem Acoustic panels Made-to-measure paneling with finish and layout set per room, so the acoustic build-up and the look are decided together.
Whole-wall builds that mix panel with storage, doors and reveal detailing Wall panel systems Paneling specified to project dimensions, so panel, joinery and openings are drawn as one system.

Product families above are described on their own product pages. Confirm the specification for your wall — size, finish, fixing method and application limits — before you place an order.

5. Samples and approval: what to test, not just look at

Order physical samples before production, and judge them in the room, not under showroom lighting:

  • Look at the sample under the actual daylight and the actual artificial light, because texture and gloss read very differently after dark.
  • Tape two samples side by side to check the join line and whether the pattern repeats or runs continuously.
  • Check the edge. Ask what the trim detail looks like at an external corner and at a reveal, and get that drawn.
  • Mark the approved sample with the project name, wall reference and finish code, and photograph it. That record is what protects you at delivery.

6. Customisation and drawings: the gate before production

Most wall projects need made-to-measure sheets, so the checklist must include an approval stage between enquiry and manufacture. Under our custom and OEM service, dimensions, colour and surface pattern are set per project, and we work from your drawings or from a layout we prepare with you.

Before production is released, make sure these documents exist and are signed off:

  • A setting-out drawing showing every wall face, sheet module, and where the cut pieces land.
  • Cut-out schedules for lights, switches and outlets, with positions measured from a fixed reference line.
  • Corner, reveal and trim details, including which profiles are supplied with the panel.
  • A packing and palletising plan that matches the setting-out drawing, so each bundle arrives labelled for its wall.

When wall panel is part of a larger fit-out — cabinetry, doors, wardrobes, vanities and lighting from the same source — it is worth having one party coordinate those drawings. Our turnkey interior project solutions cover that coordination: design consultation and space planning, material selection and specification, production with quality control, then site coordination and handover.

7. Delivery and site logistics

Wall panel is bulky and the edges are the fragile part, so treat logistics as a specification item:

  • Confirm sheet dimensions against door widths, lift openings and stair turns at the destination — before the container is loaded.
  • Agree edge protection, interleaving and pallet layout, and ask for the loading plan to be sent with the packing list.
  • Decide the delivery terms and who handles customs clearance at the destination port.
  • Photograph the packaging at receipt and note any damage on the delivery paperwork while the container is still being unloaded.

We arrange freight by sea, air or rail with the shipping documents prepared on our side, and deliver door to door under our logistics and door-to-door delivery service. Import duties, local permit requirements and final delivery conditions still need confirming for each destination — those depend on the shipment, not on a general promise.

8. Installation, handover and after

  • Confirm who installs. Local crew or guided installation both work, but the fixing method you choose has to match the substrate you confirmed in step 2.
  • Do a dry layout of a few sheets on site before fixing anything permanently, and check the pattern direction and joint width.
  • Agree the snag list at handover: joints, trims, cut-outs and any replaced sheet.
  • Order spare sheets with the original batch. Wall panel from a later production run can vary in tone, and a single replacement sheet should not stand out.

Our installation and after-sales support covers site installation, inspection and snags, plus spare parts and replacement for panels supplied on the project. Warranty terms and response arrangements are set out per order, so read what is written on your contract rather than assuming a standard.

The checklist in one table

Stage Decide and record Done when
Scope Wall list, room types, clashes with lighting, services, joinery and doors Every wall face has a reference on the drawing
Substrate Flatness, moisture, allowed build-up depth, preparer, fixing method Site contact has confirmed in writing who prepares the wall
Specification Size, thickness, surface effect, corner detail, quantity plus allowance Two suppliers can quote the identical line item
Product fit Rigid or flexible sheet; interior or facade; acoustic or decorative Each wall is mapped to one product family
Sample Approved physical sample with finish code and join check Sample signed, labelled and photographed
Approval Setting-out drawing, cut-out schedule, trim details, packing plan Drawings released to production with your sign-off
Logistics Sheet size versus access route, packaging, delivery terms, receipt checks Loading plan matches the setting-out drawing
Handover Installer, dry layout, snag list, spare sheets from the same batch Snags closed and spares stored on site

Send us your drawings, the wall list and the room types, and we will map each wall to a panel specification, quote it as one package with the rest of the fit-out, and return a setting-out drawing for your approval before production starts. As a one-stop furniture and building materials supplier, we handle panel, joinery, doors and finishing products under one order.

Contact PHILLIP by phone or WhatsApp on +86-13928214007, email santerson@qq.com, or use the form on our contact page.

Browse wall panels and cladding