A wall cladding quote is easy to compare on one number: price per square metre. With MCM flexible travertine stone veneer, that single figure tells you almost nothing about the real delivered cost, because the material is sold as sheets, priced by area, and installed with adhesives and trims your builder may have assumed were included. The paragraphs below go through the line items to check before you sign a supplier quotation for bendable soft stone on an interior or exterior wall package.
Start with the product definition, not the price
Flexible travertine veneer is sold under many names by many factories, and they are not the same product. Before comparing prices, confirm in writing that the quotation covers a modified clay soft stone sheet that reproduces the natural hole texture of travertine, is thin enough to bend onto curved walls and special-shaped surfaces, and is specified for both interior decoration and exterior facade cladding. If your project has arches, columns, curved reception desks or rounded corners, state those elements in the enquiry and ask the supplier to confirm that the same sheet can wrap them.
Ask which finishes are actually in stock rather than which finishes exist on a brochure. Colour batches from different production runs vary, so every metre for one wall should come from a batch you have approved against a physical sample.
The line items a complete quote should contain
| Line item | What to verify before you accept it |
|---|---|
| Material unit and pricing basis | Is the price per sheet or per square metre, and does it include offcuts? Ask for sheet dimensions and usable area so your take-off is calculated the same way as the supplier's. |
| Wastage allowance | Curved and special-shaped surfaces generate more cutting loss than flat walls. Confirm whether the quoted quantity already includes wastage or whether it will be added later. |
| Colour and batch | Named colour, batch consistency for one wall, and written confirmation that repeat orders may vary from the approved sample. |
| Samples | Whether samples are free, who pays courier cost, and how long an approved sample is held for reference during production. |
| Minimum order quantity | The MOQ per colour and per project. Ask the supplier to state it in writing rather than relying on a verbal figure during a call. |
| Adhesive and fixing method | Whether tile adhesive is supplied or must be bought locally, and which substrate preparations are required for cement-based bases and gypsum board. |
| Corners, edges and trims | External corner profiles, edge trims and joint treatment pieces. These are frequently excluded from the base quotation. |
| Exterior scope | Which parts of the quote apply to facade use, including weather exposure, freeze conditions and crack resistance claims for outdoor walls. |
| Packaging and loading | Pallet or carton specification, sheet protection during transit, and container loading plan if you are consolidating with other materials. |
| Freight terms and documents | Incoterms, freight cost to your port or site, customs paperwork, commercial invoice, packing list and certificate of origin. |
| Production and delivery timing | Stated production window for the approved quantity, plus how delays are communicated. Treat any timeline as confirmed only once it is in the written quotation. |
| After-sales terms | How damaged sheets, short shipments and replacements are handled, and who bears return or replacement freight. |
A quote that omits trims, adhesive and freight is not cheaper than a full one — it simply moves those costs to a later invoice. Put the same list of questions to every supplier you approach and the comparison becomes straightforward.
Interior versus exterior: check the claims separately
The same sheet is often quoted for a lobby feature wall and for an external facade, but the risk profile differs. For interiors, focus on adhesion to the substrate, joint treatment, and how the surface behaves around services and skirtings. For facades, ask specifically about weather resistance, anti-freezing behaviour and anti-crack performance in your climate, and confirm which fixing detail the supplier recommends for exposed walls.
Do not assume that a product approved for interior use in one project carries the same warranty when used outdoors. Get the exterior scope stated in the quotation, including any exclusions.
Installation costs belong in your comparison
Flexible stone sheets are cut on site with simple hand tools and fixed to a prepared cement base or gypsum board with tile adhesive, which is where the material saves labour compared with rigid natural stone. Ask your installer to price against the same assumptions for every option: substrate preparation, cutting allowance on curved surfaces, corner and edge detailing, and clean-up.
Lighter sheets also reduce structural load on existing buildings, which matters in renovation work where the background wall cannot carry heavy cladding. If that is your situation, ask the supplier for sheet weight per square metre so your engineer can check it, rather than accepting a general claim about lightness.
How the same material looks across a project
Travertine-look soft stone is most often specified where a warm, natural surface is wanted without the weight and cutting difficulty of quarried stone: hotel lobbies and restaurant feature walls, villa living areas and terraces, retail fronts, shopping mall columns, office reception backgrounds, and curved exterior elements on renovated facades. Related bendable sheets in the same wall category include the MCM Flexible Rammed Earth Panel - Bendable Soft Stone Wall Cladding for earthy, textured interiors and the Flexible Wood Grain Cement Wall Panel where a timber look is wanted on a curved surface. For larger flat facade areas, composite options such as the Aluminum Honeycomb Panel for Building Exterior & Interior Wall Cladding are usually specified instead, so decide early which surfaces need flexibility and which need rigidity.
Questions worth sending with your enquiry
- Send the drawings or photographs of every curved surface you intend to clad, and ask for confirmation that the sheet will wrap them.
- Request a physical sample of the exact colour before the quotation is finalised.
- Ask for a bill of accessories: adhesive coverage per square metre, corner profiles, trims and joint pieces.
- Ask what happens if the delivered batch does not match the approved sample.
- Confirm whether one delivery can be split across sites on a multi-building project.
Frequently asked questions
Is flexible travertine veneer priced per sheet or per square metre?
Both conventions are used. Always ask for sheet dimensions and usable area, then convert every quote to a cost per installed square metre so the comparison is honest.
Can it be installed on curved walls without special equipment?
Yes. The sheets are thin and flexible, cut on site with simple tools, and bonded with tile adhesive to a prepared cement base or gypsum board, so heavy lifting and cutting equipment is not required.
What is usually left out of a soft stone quotation?
Corner profiles, edge trims, adhesive, wastage on curved surfaces, freight to site and replacement terms. Ask for each as a separate line so nothing appears as a variation later.
Get a full quotation from SANTERSON
SANTERSON is a China-based furniture and building materials manufacturer supplying wall cladding, built-in furniture and interior fixtures for hotel, villa and commercial projects. Send your drawings, wall elevations and quantities to the team on the contact page, and the quotation will itemise material, accessories, packaging and freight so you can compare it line by line against any other supplier.