A mood board arrives with a curved reception wall, a warm stone backdrop and the note “feature wall, natural split-face look”. Your procurement team now has to turn that image into something a factory can quote, pack and ship. For rigid stone slabs this is where projects stall: radius walls need kerfing or fabricated segments, heavy panels need additional substrate support, and freight cost climbs with every square metre of stone.
Bendable mineral cladding solves that specific problem. Our flexible rock stone panel is a thin, rollable wall sheet moulded with the rugged texture of natural rock, so the same brief can be quoted as a lightweight sheet material instead of a stonework package. This article walks through the exact information we need in an enquiry to move from design intent to a firm quotation.
Start With the Wall, Not the Material
The first thing our engineering team looks at in a design brief is not the finish; it is the geometry and the backing surface. Flexible mineral sheets are installed with tile adhesive onto a solid, flat base such as cement render or gypsum board, then cut and jointed on site. That means your enquiry should state:
- Substrate. Cement render, fibre cement sheet, gypsum board or an existing tiled surface — and whether it is already in place or still to be built.
- Flat or curved. For curved work, give the radius or diameter of the column, arch or feature wall. Rigid panels cannot wrap these; flexible sheets can.
- Exposure. Interior feature wall, external facade, semi-exposed soffit or wet area. Exterior positions change what we specify and how we recommend detailing the joints.
- Area per elevation. Square metres per wall rather than a total for the whole building, so we can advise on sheet packing and cutting waste.
What the flexible rock stone panel actually is
The flexible rock stone panel is a bendable mineral decorative wall sheet. Its surface reproduces the rough, uneven relief of natural rock face, while the base layer stays thin enough to be rolled for packaging and delivery. In practical terms this gives project teams four advantages over quarried stone:
- Weight. The stone look is achieved without the mass of solid stone, which reduces load on walls and framing and makes high-level and upper-storey application simpler.
- Logistics. Sheets roll up for packing, so container space is used more efficiently than with crated slabs — a real cost difference on international shipments.
- Curved and special-shaped surfaces. Columns, arches, curved reception desks and feature walls can be clad directly.
- Site work. Panels are cut, drilled and bent on site with simple hand tools; no heavy lifting equipment is needed for the cladding itself.
The material family also covers other finishes when a project needs consistency across several elevations. The flexible wood grain cement wall panel carries a timber-grain surface on a cement-based sheet with a white raw face that can be painted, and the MCM flexible travertine stone veneer replicates the natural hole pattern of travertine in an ultra-thin sheet. Specifying from one family keeps joint details and installation method identical across a building.
| Finish | Surface character | Typical use in a project |
| Flexible rock stone panel | Rugged natural rock face relief | Lobby and reception feature walls, external facades, restaurant and villa renovation |
| Flexible wood grain cement panel | Timber grain on a mineral sheet, paintable raw face | Warm interior accent walls, curved joinery-adjacent surfaces, facade cladding where timber is impractical |
| MCM flexible travertine veneer | Natural travertine pitting and pore texture in an ultra-thin sheet | Hotel and mall interiors, curved columns, exterior renovation with weather exposure |
| MCM flexible rammed earth panel | Rammed-earth strata texture, white or earth brown | Homestay, cultural and F&B interiors, villa feature walls, heritage-style renovation |
Colour, thickness and joint treatment are quoted per project. We do not publish fixed technical datasheets online because the correct build-up depends on your substrate and exposure — send the drawings and we will specify it with you.
The five inputs that make an enquiry quotable
When a wall-cladding enquiry reaches us with the following, we can usually return a priced proposal with packing and freight options in one pass rather than after several rounds of questions.
1. Drawings or photographs of the wall
A marked-up elevation, even a phone photo with dimensions written on it, tells us more than a specification line. Note heights, openings, corners and any radius work. For curved elements, state the radius and whether the wrap is convex or concave.
2. Quantity by elevation
Give square metres per wall and confirm whether the figure is a net finish area or includes cutting allowance. For multi-building or villa packages, list quantities per unit so we can consolidate shipments.
3. Surface selection and colour direction
Name the finish you want from the range above, plus a RAL reference, paint sample or a photograph of a project you like. Custom surface painting is available on these sheets, so a colour direction in the first email saves a sample cycle.
4. Exposure and location
Interior or exterior, and the city the panels are going to. Exterior positions and coastal settings change what we recommend for the base build-up and joint detailing, and the destination sets the freight route.
5. Project stage and programme
Tender, detailed design or ready-for-procurement, with your installation date. Cladding sits in a tight window between substrate completion and handover, so we schedule production against the on-site date rather than the enquiry date.
A worked example: curved villa feature wall
Take a villa refurbishment where the design calls for a rock-face backdrop wrapping a curved living-room wall, continuing to an external garden wall. With stone slabs this becomes two trades, a structural substrate discussion and crate freight. Sent to us as a flexible-cladding enquiry, the package is: elevation drawings with the radius marked, roughly 40 m² split between interior and exterior elevations, a colour direction taken from a project photograph, and the destination port.
From there the workflow follows our standard stages — design and material coordination, then custom and OEM production of the selected finish, then logistics and door-to-door delivery, with installation and after-sales support for the site team. Because the sheets ship rolled, the same volume that would have travelled as crated stone occupies far less container space.
Common questions before an enquiry goes out
- Can these panels go on an external facade? Yes — the rock-stone and travertine sheets are used externally, including in renovation work. Tell us the exposure so we specify the fixing and joint detail correctly.
- Do you supply samples? Sample pieces of the selected finish can be arranged before order confirmation; include your courier account or address in the enquiry.
- Who installs it? Any tiling or dry-fix crew can work these sheets with simple tools. We provide installation guidance, and site support is available through our after-sales service.
- Can the colour be matched to our palette? Custom surface painting is offered on request; send a RAL code or physical sample reference.