A wall finish that looks like natural travertine but ships in rolls and wraps around an arch is easy to specify badly. Buyers who send a supplier only a colour name and a square-metre count usually get a quotation that cannot be compared with anyone else's. The specification below is the one we ask for on our own MCM flexible travertine stone veneer enquiries, because each field removes one round of rework before production starts.
Start with the substrate and the curvature, not the colour
Flexible stone cladding is bonded to a prepared base rather than fixed with a mechanical frame, so the surface behind the panel decides most of the installation method. Tell us whether that base is cement render, gypsum board, brick or an existing tiled wall, and whether it is indoors or exposed to weather. Our product data describes bonding directly to a cement base or gypsum board with tile adhesive, which is why the substrate type belongs in the first line of the specification.
Curvature comes second, and it is the reason this material is specified at all. The sheet is thin enough to bend onto curved walls, columns and shaped surfaces that rigid stone slabs cannot cover without segmenting. For each curved run, note the approximate radius or diameter and whether the curve is a single bend or a double curvature. A column in a hotel lobby and an arched soffit in a villa are different forming jobs, and the panel format and joint layout change accordingly.
State the exposure: interior feature wall or exterior facade
The same travertine-look sheet is used on both sides of the building envelope, but the specification should say which. For interior walls — a headboard wall, a reception counter front, a restaurant feature wall — the visual match to the sample is the priority. For exterior facade cladding and renovation of an existing facade, the material properties matter more: our flexible travertine stone is described as weather resistant, with anti-freezing and anti-crack behaviour for outdoor use.
Where a project sits in a freeze-thaw climate or on a facade that faces driving rain, write that condition into the enquiry instead of leaving us to guess. It also tells your contractor which adhesive and joint treatment the site should be prepared for, since those are chosen on site against the base and exposure you declared.
Fix the texture and colour reference before quantities
Travertine is valued for its natural hole pattern and tonal variation, and a flexible sheet reproduces that by moulding the surface rather than printing it. Specify which of our stocked colours you are working to, and confirm whether you want the surface to keep its natural-looking variation or be painted to a matched tone. Colour options can also be customised on the related flexible rock stone panel line, which is useful when a project needs a tone outside the standard palette.
Samples settle arguments that photographs cannot. We keep multiple colours in stock and supply samples, so request them early enough to pin one sheet to the actual substrate and view it under the project's lighting. A sample approved against a bare wall is not the same decision as one approved against the finished base with the joint layout drawn on it.
Quantity: split flat area from shaped and cut-down area
A single total in square metres hides where the waste will occur. Give us three numbers instead: the flat wall area, the curved or wrapped area, and the small pieces — reveals, soffits, pilasters, niche surrounds. Curved runs and cut-downs need more setting-out time and produce offcuts, so separating them makes the order quantity and the price per square metre comparable between suppliers.
Then state how the material will be processed on site. Our panels are cut with simple hand tools without heavy equipment, and drilling and bending are normal site operations. If your installer plans to cut on site rather than receive pre-sized pieces, say so, because it affects how many full sheets you should order and how the joints are planned.
Related finishes in the same package
Wall cladding rarely sits alone on a project drawing. When the same specification covers several finishes, we can group them into one production and shipping plan: a rammed-earth look for a lobby wall via the MCM flexible rammed earth panel, a timber-look surface for a ceiling reveal or soffit using the flexible wood grain cement wall panel, and a framed or decorative finish from our wider wall panels and wall cladding range. Grouping these on one purchase order keeps the batches, colours and delivery dates under a single coordination process rather than three separate ones.
The fields to copy into your enquiry
| Location & exposure | Interior or exterior; room or facade elevation; climate condition such as freeze-thaw or coastal exposure |
| Substrate | Cement render, gypsum board, brick or existing finish; whether it is already flat and ready for adhesive |
| Geometry | Flat runs, curved walls, columns, arches; approximate radius or diameter for each curved element |
| Colour & texture | Stocked colour reference, or a matched custom tone; natural variation or painted finish |
| Quantities | Flat m², curved/wrapped m², and small cut pieces listed separately |
| Site processing | On-site cutting and drilling by your contractor, or pre-sized pieces from us |
| Samples | Which colours to send, and the delivery address for sample approval before order confirmation |
| Programme | Sample date needed, production release date, and the installation window on site |
Fill those eight fields and a quotation arrives that you can place side by side with competing offers, because every supplier is pricing the same scope. It also protects your schedule: sample approval, production release and the installation window are fixed in one exchange rather than discovered one problem at a time.
As a China-based manufacturer of furniture and building materials working on villa, hotel and office projects, we handle these finishes alongside cabinetry, flooring, lighting and outdoor products, so the wall specification can be coordinated with the rest of the fit-out under turnkey solutions rather than managed as an isolated purchase. Send your drawings, the eight fields above and your sample address, and we will return a panel layout, quantities and a price for the exact scope you are building.