A freestanding pedestal basin stops being a single line item the moment it appears on a bathroom schedule. The quantity is easy enough to count; what causes re-orders, site delays and mismatched finishes is coordinating the basin with the rest of the sanitary suite, confirming the wall fixing detail, and matching the tapware that sits on top of it. This guide uses our Freestanding Pedestal Basin 1050B as the worked example, because it sits inside a matched collection and therefore shows exactly where the coordination decisions have to be made.

Start from the room schedule, not the product catalogue

Before any quantity is written down, list every bathroom in the project and mark how each one is used. A villa master bathroom, a boutique hotel guest bathroom, a ground-floor powder room and a shared pool restroom all need a washbasin, but they do not need the same one, and they do not carry the same spare allowance. For each location record three things: the fixing wall, the water supply and waste position, and whether the basin is expected to be used by guests or by staff.

The 1050B is a freestanding stand basin with a slim tapered body and a gold line accent, fixed to the wall through back-panel reinforcement. Because it stands on the floor rather than hanging from it, the wall behind it still has to carry the fixing — so a lightweight partition needs the same confirmation as a wall-hung unit would. That check belongs in the survey stage, not in the purchase order.

Counting quantities: what actually goes into the number

Work from a room-by-room schedule and keep three separate columns. The first is installed quantity: one basin per wash position, counted from the layout drawings. The second is spare quantity: ceramicware shipped internationally can arrive damaged, and a bathroom that stays open to guests cannot wait for an ocean consignment, so project buyers normally order spares against the number of guest bathrooms rather than the total unit count. The third is mock-up quantity: one unit ordered ahead of the main batch so the client can approve the gold line finish, the glaze and the height in a real room.

Bathroom typeBasin decisionQuantity notes
Villa master bathroomFreestanding stand basin as the visual focus of the roomOne per wash position; confirm mirror and tapware height against the basin rim
Guest powder roomFreestanding where floor space allows, wall-hung where it does notOne per room; add spares for every guest floor, not every room
Secondary family bathroomWall-hung basin keeps the floor clear and simplifies cleaningOne per wash position; check waste outlet before ordering
Boutique hotel guest bathroomSame model repeated across room types for housekeeping consistencyCount by room type, then add a mock-up unit and spares per floor block
Public and commercial restroomsHigher traffic favours the wall-hung members of the same seriesCount by fixture position; allow a larger spare allowance for impact damage

Once those columns are complete, freeze the schedule before production starts. Changing a basin type after the sanitary suite has been ordered is what turns one line item into three.

Coordinating the 1050 collection across the project

The single most useful decision in ceramic procurement is to buy a matched series rather than individually attractive pieces. The 1050B belongs to the 1050 sanitary suite, so the toilet and the wall-hung basins share the same silhouette, glaze and gold line detail. That matters on site: when the WC, the stand basin and the secondary bathroom sinks come from one series, the tiler, the plumber and the interior designer are all working from the same reference, and a client walkthrough does not end with a complaint that the downstairs sink "does not match".

For this collection the coordinating members are the Washdown One Piece Toilet 1050A, which supports both P-trap and S-trap rough-in layouts, plus two wall-hung options in the same line: the Wall Hung Ceramic Basin 1050WB and the taller Wall Hung Ceramic Basin 1050WC. Use the freestanding basin where the room has a clear sightline to it, and the wall-hung members where floor area is tight or where under-basin cleaning matters — then keep the same series throughout so the difference reads as a deliberate layout decision rather than an inconsistency.

If a project mixes collections on purpose, write that down in the schedule too. A guest wing in one series and the public restrooms in another is a defensible specification; discovering it at handover is not.

Matching tapware, waste and countertop details

The 1050B has a reserved tap hole for a single-lever faucet. That one detail drives several coordination items: the spout reach has to clear the rim without splashing, the lever height has to sit below the mirror, and the waste set has to suit the basin outlet. Confirm all three against the current technical data sheet before ordering, since dimensions and rough-in figures are the items most often revised between catalogue pages and production drawings.

Dimensions, trap type and rough-in distances for ceramic sanitaryware are checked against the current technical data sheet with every order. The figures published on a product page are not always the latest revision, so we confirm them in writing before production starts.

Where a design calls for a vanity instead of a freestanding basin, that is a different branch of the bathroom sanitary fixtures range — an undermount or vessel basin on a stone countertop. Decide which branch each room belongs to at layout stage. Both are legitimate for hospitality work, but they need different plumbing, different joinery and different site sequencing.

Specifying the surface for real use

The basin is made from high-density vitreous ceramic with a glossy glaze that resists water spots and mineral buildup, which is the property housekeeping actually cares about. Two practical checks follow from that. First, in hard-water areas, ask what cleaning agents the maintenance team intends to use and confirm they are suitable for a glazed surface — abrasive powders will dull a glaze anywhere. Second, treat the gold line accent as a finishing detail rather than a surface to be scrubbed, and brief the cleaning schedule accordingly at handover.

A mock-up room answers both questions cheaply. Approve the look of the gold line under the room's own lighting, then have the maintenance team clean it for a week before signing off the batch order.

Ordering through one supplier so the schedule holds together

When basins, toilets, vanities, lighting, wall panels and flooring are bought separately, each supplier carries its own packing list, its own delivery window and its own shortfall. When they come from a single furniture and building materials manufacturer, the sanitary suite can be consolidated into one shipment with one set of documents, and a shortage is visible in one packing list instead of four.

We support that route from brief to handover through turnkey project solutions: space planning and product specification, production and quality control, freight by sea, air or rail with the customs paperwork, then on-site installation support. For projects outside China we agree delivery terms and site arrangements case by case, so confirm those for your specific site rather than assuming a standard package.

A pre-order checklist

  • Room-by-room schedule complete, with installed, spare and mock-up quantities shown separately.
  • Fixing wall confirmed for every freestanding unit, including partitions.
  • Water supply and waste positions recorded against the technical data sheet, not the catalogue image.
  • Tapware spout reach and lever height checked against the basin rim and mirror.
  • Coordinating members of the same series listed by model number for each room type.
  • Mock-up unit approved in a real room before the main batch is released to production.
  • Packing list, spares allocation and delivery sequence agreed with site before shipping.

Send us your bathroom schedule and we will quote the 1050B together with the coordinating pieces, flag any room where a wall-hung member of the series is the better fit, and confirm the rough-in details against current production drawings before anything goes into production.