What 1050WC Actually Is

The 1050WC is a tall wall-hung basin with a slim vertical body and a gold line accent. Its published size is 410 mm wide by 340 mm deep by 620 mm high, and it is fixed to the wall through a back panel rather than sitting on a pedestal or a vanity unit. The height is what makes it different: at 620 mm the bowl sits well below a conventional wall-hung basin, so it reads as a feature piece against the wall surface and leaves the floor underneath completely clear.

Material is high-density vitreous ceramic with a glaze specified as resistant to staining, yellowing and mineral deposits. The faucet hole is pre-drilled for a single-hole tap, which means the tap choice has to be locked at the same time as the basin — there is no deck to move across and no three-hole option.

The supplier positions it for boutique hotels, villa feature bathrooms and high-end residential renovation. That positioning matters when you compare alternatives, because a product designed to be looked at behaves differently from a product designed to serve a queue of guests before breakfast.

Test One: Does the Tall Silhouette Suit the Room?

The 620 mm height is the strongest reason to choose 1050WC and the most common reason to reject it. Read it as a design decision with two consequences.

• Spill containment. A shallower, wider bowl catches less splash-back than a deep basin with high sides. In a powder room or a guest washroom used briefly, that is rarely an issue. In a family bathroom or a busy hotel shared bathroom, check the bowl depth and rim height on the technical sheet before specifying it next to a mirror.
• Tap geometry. The tap must be wall-mounted or deck-mounted on the basin itself at the pre-drilled hole, and its spout has to reach over the rim without dripping onto the wall face. Ask for the recommended spout length and height for 1050WC rather than assuming a standard mixer will sit correctly.
• Clear floor. Nothing sits under it, so the tile continues uninterrupted and the floor can be mopped in one pass. That is a genuine housekeeping argument for villas and hotels, and it is worth writing into the maintenance notes when you defend the choice to an operator.

If the room needs storage under the basin, 1050WC cannot provide it and no wall-hung alternative will. In that case compare a vanity-mounted option instead of forcing a substitute.

Test Two: Compare It Against the Closest Alternatives

SANTERSON's sanitary catalogue holds several basins that solve the same problem differently. Comparing them by footprint and mounting type is faster than comparing photographs.

Dimensions are quoted from staging product pages. The 1038WB page does not publish a size at all. Confirm every measurement, plus trap type and rough-in, on the final technical sheet before setting out wall finishes or ordering carrier frames.

Test Three: Does It Need to Belong to a Coordinated Set?

1050WC is one part of the 1050 collection, which also covers Washdown One Piece Toilet 1050A, the 1050B stand basin and the 1050WB wall basin. If your project repeats the same bathroom across guestrooms, buying the suite rather than the single item is usually the cheaper path: matching glaze tone and gold-line detailing from one production run removes the risk of two shades of white sitting side by side.

The 1050A toilet in that set supports both P-trap (180 mm) and S-trap (250 mm) rough-in, which is a useful signal when you are standardising across buildings with mixed slab depths. Ask the same question about the basins: confirm trap type and waste orientation for the exact model on your floor plan, not for the series as a whole.

Where a project mixes styles — heritage wings and a modern extension, say — a coordinated suite may be unnecessary. Then a plain wall basin such as 1038WB keeps the plumbing detail simple and avoids paying for decorative detailing that will not read against the rest of the room.

Test Four: Check What Is Actually Supplied

Basin disputes in project delivery rarely concern the ceramic. They concern what was assumed to be included. Before ordering, get written confirmation of:

• The faucet hole configuration and whether the tap, pop-up waste and bottle trap are included or ordered separately.
• The wall-fixing method and whether a carrier frame is required for the finished wall build-up, especially on stud partitions or stone-clad walls.
• Spares: extra gold-line trim pieces or matching touch-up material for a large order, so a damaged unit late in the programme does not become a visible mismatch.
• Packaging and handling allowance for tall, wall-hung ceramics on site — the 1050WC profile is more exposed to impact during installation than a compact standard basin.

SANTERSON supplies these fixtures as part of a wider furniture and building materials package, with custom and OEM service, door-to-door delivery, installation support and after-sales support. That makes it practical to group basins with the vanities, wall panels, lighting and flooring for the same phase, so one shipment and one site team cover the wet areas instead of three.

A Decision Rule

Ordering Checklist Before You Commit

• Confirm final dimensions, trap type and rough-in against the technical sheet for the exact model on each floor plan.
• Confirm tap spout reach and height against the basin rim, and whether the tap is included.
• Confirm wall-fixing detail and carrier-frame requirement for your partition or cladding build-up.
• Decide suite versus single item, and state the glaze and gold-line finish on the purchase order.
• Order one sample basin per type before the bulk quantity, and mount it at finished height to check splash and tap geometry in the real room.