A wall-hung basin decides how a guest bathroom reads the moment the door opens. In boutique hotels, serviced apartments and villa guest suites, buyers usually want three things at once: a slim profile that keeps a small floor clear, a finish that survives daily housekeeping, and a look that still photographs well five years after handover. The Wall Hung Ceramic Basin 1050WC is our tall, wall-mounted model in the Luxury Gold Line, and this guide walks through how to specify it for a hotel fit-out: which room types suit it, what to confirm with your plumbing and joinery teams before ordering, and how to keep the whole floor consistent when you are buying sanitary ware by the room.
What the 1050WC actually is
The 1050WC is a tall wall-hung basin with a narrow vertical body and a gold line accent running down the front. Its page lists a size of 410×340×620 mm, and it is fixed to the wall with back-panel reinforcement rather than sitting on a pedestal or a vanity unit. That combination gives you two practical results worth writing into a specification:
- The floor under the basin stays open, so housekeeping can mop straight through without working around a pedestal or cabinet toe-kick.
- The tall silhouette reads as a feature piece, which is why it gets specified in guest-facing bathrooms rather than back-of-house washrooms.
The body is high-density vitreous ceramic with a glaze formulated to resist staining, yellowing and mineral deposits. The faucet hole is pre-drilled for a standard single-hole tap set, so your plumber does not need on-site drilling or an extra deck plate.
Where this basin works best in a hotel project
The 1050WC is not a universal answer for every bathroom on a floor plan. In our own project work it performs best in three settings, and the reason is usually geometry rather than style.
Guest bathrooms with a compact footprint
Because the basin carries no cabinet or pedestal below it, the floor area it occupies is close to the bowl itself. In an en-suite where the shower, WC and basin all compete for two or three square metres, that reclaimed strip of floor makes circulation possible without shrinking the shower tray. Pair it with a floating vanity only when the room has an extra wall to spare; in tight rooms the basin alone, plus a mirror cabinet, keeps the plan readable.
Feature bathrooms in villas and suites
The gold line detail is the reason designers pick this model. It works when the basin is visible from the doorway or sits against a feature wall. On longer runs of identical guest rooms we normally reserve 1050WC for suites and public-facing washrooms, and use the shorter Wall Hung Ceramic Basin 1050WB in standard rooms. Both carry the same gold line language, so the design intent holds across room categories while each room gets a size that fits its wall.
Renovation of existing stack bathrooms
Wall-hung basins are common in refurbishment because they let you change the look of a bathroom without rebuilding the vanity surround. If the existing rough-in is sound, swapping to a wall-hung model and closing off the old floor waste is usually less disruptive than a full strip-out. Confirm the trap position on site before committing, though; that single measurement drives everything else in the schedule.
Technical points to confirm before you place the order
Every wall-hung basin failure we hear about traces back to one of four items being left unresolved at tender stage. Put them in your pre-order checklist and treat each as a written sign-off, not an assumption.
| Item | What to confirm | Who signs it off |
|---|---|---|
| Finished size and clearance | The 1050WC page lists 410×340×620 mm. Check that against your tiled finished dimension, including the thickness of wall finishes and any niche behind the basin. | Architect / site QS |
| Trap type and rough-in set-back | Confirm whether your waste is a wall trap or floor trap, and the set-back from finished wall to centre. This decides carrier frame choice and how far the basin stands off the wall. | M&E / plumbing consultant |
| Support structure behind the basin | The 1050WC fixes with back-panel reinforcement. Verify the substrate: steel stud with a rated carrier frame, or masonry with adequate fixing points. Never fix into plasterboard alone. | Structural / main contractor |
| Faucet reach and spout height | The basin has a pre-drilled single faucet hole. Match tap spout reach and height to the bowl depth so water lands centrally and splashing stays contained. | Interior designer / supplier |
Keeping one design language across the whole project
A hotel fit-out goes wrong when each floor or block is specified separately and the finishes drift apart. The Luxury Gold Line exists to solve that: it is a matched sanitary collection, so the same gold line detail appears across several fixture types.
- Wall Hung Ceramic Basin 1050WC — tall wall-mounted basin, for suites and feature bathrooms.
- Wall Hung Ceramic Basin 1050WB — a trapezoid wall-hung basin at 495×440×390 mm, which suits standard guest rooms where the shorter profile leaves more usable wall.
- Freestanding Pedestal Basin 1050B — for powder rooms and villa bathrooms where a stand basin reads better than a wall-hung one.
- Washdown One Piece Toilet 1050A — the matching WC, offered with both P-trap and S-trap rough-in options so you can cover wall-drain and floor-drain layouts on one line item.
Buying these as a group rather than one at a time is where the commercial benefit sits. One purchase order, one container, one set of packaging markings and one inspection pass means fewer variations when the site team opens crates room by room. If your project mixes wall-drain and floor-drain bathrooms, that dual rough-in option on the matching WC alone removes a common source of mid-construction change orders.
Coordinating the basin with the rest of the bathroom
A gold line accent is a small detail, so it either gets supported by its surroundings or it looks accidental. Three coordination decisions matter more than the basin itself.
Mirror and lighting
With a tall basin, the mirror sits higher than usual. Confirm the vertical relationship early: the top of the basin rim, the mirror sill, and the vanity light all have to land in one sightline. We supply vanity lighting and mirror cabinets in the same interior-fixtures range, so these can be resolved as one package instead of three separate supplier queries.
Shower and taps
Metal finishes should match across basin mixer, shower set and accessories. Our rainfall shower systems are specified alongside wall-hung basins on hospitality work for exactly this reason: one finish schedule, one batch of hardware, no near-miss tones between the tap spout and the shower riser.
Storage without a vanity
A wall-hung basin with no cabinet below removes storage, so plan for it elsewhere in the room. Recessed niches in the shower, a mirror cabinet at the basin, and towel rails and warmers on the adjacent wall usually cover guest needs without adding furniture to a small room.
How we supply basins for hotel and villa projects
SANTERSON has been operating since 2008 as a furniture and building materials manufacturer, and bathroom ceramics sit inside the same interior fixtures range as our cabinetry, lighting, wall panelling and flooring. For a fit-out that means one supplier covering several trades, which is where procurement risk drops most sharply.
On the practical side of an order:
- Send room-by-room quantities with your trap arrangement noted per bathroom type. We quote against that rather than a single blanket line.
- Ask for the current technical sheet for each model in your order and circulate it to your M&E consultant before walls are closed.
- If you need a non-standard finish or dimension on the metal accents, our custom and OEM service covers bespoke finishes and prototyping; raise it at sample stage, not at production.
- Freight is arranged door-to-door by sea, air or rail with the customs paperwork handled on our side, so your site receives crates against an agreed delivery point rather than a port collection.
We have delivered villa and hospitality packages for Australian projects including Willoughby, Perth, North Turramurra, Melbourne and Sydney. Freight terms, duties and local installation requirements are confirmed per project with your own consultants; we do not assume a compliance position on your behalf.
Questions buyers ask us about the 1050WC
Can the 1050WC be installed on a stud wall?
Yes, provided the wall carries a properly rated carrier frame fixed to steel or timber studs. The basin's back panel transfers load into that structure. Plasterboard alone cannot support it, and this is the check most often skipped on refurbishment jobs.
Is the gold line a plating that wears off?
The accent sits within the glazed ceramic surface rather than as a surface coating that housekeeping scrubs directly. Routine wiping with a neutral cleaner is all the maintenance the glaze needs; avoid abrasive powders and acidic descalers, which dull any ceramic glaze over time.
Should every guest room get the 1050WC?
Usually not. The tall 620 mm profile suits suites and public washrooms where it can be seen properly. For standard rooms, the shorter 1050WB keeps the same gold line look with more usable wall above and beside it. Specifying both on one schedule is normal practice.
What lead time should I put in my programme?
Do not take a figure from a brochure. Lead time depends on quantity, whether you order the matched Gold Line group as one package, and any custom finish work. Confirm it in writing at quotation stage against your room schedule, and allow float before wall closure dates.
Ordering
If the 1050WC is on your fixture schedule, send us the room list with trap arrangements noted per bathroom type and we will return a quotation covering the basins plus the matching Gold Line items you need. That single package — basins, WC, mirror cabinet, vanity lighting, shower set — is what keeps a hotel bathroom consistent from sample floor to handover.
Talk to us through the contact page, and include your project location and target on-site date so the technical sheet and freight plan come back together with pricing. We can also quote the joinery, wall finishes and loose furniture around these bathrooms on the same package.