An outdoor swim spa has to work in two roles at once: a training pool in the morning, a hydrotherapy spa in the evening. That dual duty is why the Outdoor Swim Spa WS-130Aⅱ rewards a proper checklist before anyone signs a purchase order. Here is the review sequence we take project buyers, contractors and villa owners through when they specify this model — what to confirm, what to ask for in writing, and where the hidden costs usually sit.
1. Use case first: training length versus spa capacity
Agree how the unit will actually be used before any specification is reviewed, because that answer decides which of the three 130 sizes you buy and what you pay to heat. The WS-130Aⅱ is listed at 8000 mm long, while the longer Outdoor Swim Spa WS-130Bⅱ and Outdoor Swim Spa WS-130Cⅱ run to 9950 mm and 11830 mm, all three sharing the same 3000 mm width. A buyer who mainly wants evening soaking for four is paying to heat length nobody swims in. A hotel gym that advertises lap swimming needs the water run and the current to support that promise.
Put the intended use in writing — daily training, rehabilitation, children's play, guest spa use — and read the model choice against it. That one line in your brief prevents most of the change orders that follow.
2. Footprint and site access
Now the envelope. The catalog lists this model at 8000 × 3000 × 1400 mm, so the next question is not aesthetic: can the shell physically reach the foundation? Measure the delivery route as carefully as the pad — gate widths, turning radii, overhead cables, and whether a crane or long-arm forklift has to clear a wall or roofline. Then set the installed height against your finished paving level. A 1400 mm shell sitting proud of a terrace reads very differently from one dropped into a recessed platform with a surround around it.
Ask the supplier how the unit is crated, what the heaviest single piece weighs, and whether steps, insulation panels and plant arrive loose. That determines how much labour you budget for the day the truck arrives.
3. Configuration: what is actually included
Two units carrying the same model name can perform quite differently once options are factored in. The catalog entry for this model shows a jet total of 20 pcs, 7 LED lights, one filter pump, one control system and a swim training system. A closely related variant, Outdoor Swim Spa WS-130Aⅱ-U, lists a different water pump count and jet total, with the swim training system not listed in its captured specifications. Never treat a feature as standard by default — request an itemised equipment schedule against your quotation and sign it off line by line.
| Checklist item | What to confirm on the quotation |
|---|---|
| Shell and dimensions | Catalog dimensions of 8000 × 3000 × 1400 mm, plus tolerance and allowance for the finished surround |
| Jet package | Jet total (catalog shows 20 pcs), jet types, and which seats each zone serves |
| Swim training system | Whether it is included, how the current is generated, and how flow is adjusted for different swimmers |
| Filtration | Filter pump quantity, and whether sand filtration is offered for your water conditions |
| Water treatment | Ozone as listed, plus UV sterilization if you want a lower chemical load |
| Lighting | LED light count (catalog shows 7) and whether colour control sits inside the control system |
| Heating and insulation | Heat pump sizing and the insulation package — these shape running cost more than any other line |
| Access and service | Steps, handrail positions and where access hatches land for maintenance |
4. Power supply and total connected load
Total power on this model is listed at 10.85 kW in the catalog. Treat that as the opening figure for an electrical conversation, not the closing one. Have your electrician confirm what supply reaches the pad — single-phase or three-phase, and how much capacity remains after lighting, kitchen and HVAC loads are counted. Then ask the manufacturer to state in writing the electrical requirement for the exact configuration you ordered: cable size, protection device, dedicated circuit, bonding and equipotential provision around the shell, and where the local isolator sits.
Add a heat pump and the connected load changes, along with the distribution board. Settle this before the slab is poured. Pulling a larger cable through cured concrete is the most expensive mistake on this list.
5. Water treatment and who maintains it
Ozone appears as a feature on this model, which lowers but does not eliminate the need for sanitiser. Decide early who looks after the water: an owner-operator, villa housekeeping, or a facilities contractor. That decision should drive the equipment you buy — a straightforward dosing routine suits an owner testing weekly, while a managed property with guests rotating through needs more robust filtration and sterilisation options. Ask for the manufacturer's maintenance schedule and a consumables list with part numbers, so filters and dosing items can be replaced locally instead of ordered from the factory.
6. Foundation, drainage and surrounding finishes
A swim spa is a wet room in miniature. Confirm the load-bearing spec for the base with your structural engineer, the drainage route for overflow and for a full drain-down, and how the shell detail meets paving, decking or tiling at the perimeter. Where a project also specifies exterior finishes — cladding, wall panels and patio furniture from the same building and construction materials range — resolve those junctions with the spa surround early, so one trade is not cutting back into another's work on site.
7. Logistics, installation scope and handover
On imported units the commercial terms matter as much as the product. Fix who arranges freight, customs clearance and inland delivery to site, and what happens if site access turns out different from the drawings. A supplier that also handles logistics and door-to-door delivery and provides installation and after-sales support removes the handover boundary where most delays appear. Get the split of responsibility in writing: what the supplier installs, what the local contractor installs, and who commissions the plant at completion.
Close out with a document pack — as-built equipment schedule, wiring diagram, commissioning record, operating and maintenance manual, spare-parts list, and warranty cover stated per component (shell, pumps, jets, control system, heat pump, lighting). Facilities teams need those papers the first time something has to be opened up.
How sourcing as one package shortens the list
Most of the items above are coordination problems rather than technical mysteries. Sourcing from a single manufacturer helps: SANTERSON is a China-based furniture and building materials producer working on villa, hospitality and office projects, with custom/OEM capability across its ranges, so the swim spa, the seating around it and the exterior finishes can be specified together instead of negotiated with half a dozen vendors. If your outdoor space needs to be planned as one package — spa, outdoor furniture for villas and resorts, adjacent cladding and lighting — open the enquiry with drawings and site access photos, not just a model number.
Send us the plan of your terrace or pool deck, along with the intended use, and we will confirm which 130-series size, equipment options and delivery method suit the site.