A compact plunge spa is often the hardest single line item to pin down on a villa or boutique hospitality project: it has to fit a tight terrace, survive years of outdoor exposure, and arrive from another country with the pumps, controls and wiring already matched to what your site electrician can actually install. This guide walks through how we build and ship the Outdoor Swim Spa WS-PC01 from our factory in Foshan, China, and what to confirm at each stage so the shell that lands on your site is the shell you approved on paper.
What WS-PC01 Is, and Where It Fits
WS-PC01 is a fixed-seat hydrotherapy spa rather than a swim-through counter-current pool. At 3000 × 1050 mm it slots into a narrow terrace, a courtyard setback or a resort garden edge where a full-length swim spa would be out of the question. The catalogue specification lists 53 jets fed by two water pumps and one filter pump, one LED light, one control system and a total connected load of 6.65 kW. Ozone sanitation is shown as a standard feature on this model.
That configuration suits the projects we see most often: a private villa where guests want a hot, jetted soak in the evening; a boutique hotel with five to twenty wellness-adjacent rooms and no space for a full spa room; or an apartment show unit where the water feature has to read as finished product rather than construction. If your brief calls for lap swimming against a current, tell us at the enquiry stage — that is a different shell in our range, and specifying it late means re-cutting the deck.
Reading the Specification Sheet Before You Commit
Spreadsheets from different suppliers look interchangeable and are not. Three columns decide whether a spa works on your site, and each one needs a number attached rather than a tick:
- Total connected load. WS-PC01 is listed at 6.65 kW. Your electrical designer needs that figure early, because it drives the dedicated circuit, the isolator location and whether a heat pump changes the supply size.
- Pump count and duty. Two water pumps plus one filter pump on this model. Ask which pump serves the jet bank and which is reserved for circulation or a spa-side feature; that determines how the plant space is laid out.
- What "included" means. Ozone, LED lighting and the control system are shown as features on WS-PC01. Optional items in our catalogue — UV sterilisation, heat pump, sand filtration, additional water pumps, insulation and steps — are quoted separately, so a comparison only holds if both quotes list the same extras.
Where two models sit in the same footprint but differ in load and jet count, compare them line by line. The closely related WS-PC01A is a shallower 3000 × 930 mm shell with a different jet count and a lower total power figure — the right choice on some sites, the wrong one on others. We will quote both against your drawing rather than push one.
Confirming Configuration With the Manufacturer
Once the model is settled, the specification conversation should produce a written configuration sheet before any deposit. Ours covers shell dimensions and seat layout, jet count and placement, pump and filter arrangement, control system, sanitation option, insulation package, steps or access arrangement, colour and finish of the cabinet, and the electrical assumption the unit is built to.
Two points cause the most rework when they are left vague. The first is structural support: a filled spa is heavy, and the deck, slab or pedestal frame has to be designed for the wet load, not the dry shipping weight. Send us your structural drawing and we will mark the bearing perimeter. The second is access — a 3-metre shell needs a route from the port to the final position that clears gates, stairwells and overhead lines. We build to the delivery path you confirm, and where access is tight we discuss sectional or on-site assembly options at quotation stage rather than at the dock.
Factory Production and What You Should Inspect
We have been manufacturing furniture and building materials in Foshan since 2008, and spa shells go through the same production discipline as the joinery and outdoor collections on our other project lines. For a WS-PC01 order you can expect a pre-production confirmation of the configuration sheet, then shell fabrication, jet and plumbing assembly, wiring of the control system, and a factory wet test before packing.
Ask for evidence at three checkpoints and make them part of the purchase order:
- A filled functional test — pumps running, every jet live, controls responding, no leakage at joints or the cabinet base. Photographs and video of this test are standard on our orders.
- Finish inspection against the approved colour and panel sample, checked in daylight-equivalent light rather than under workshop lamps.
- Packing inspection: crating spec, corner protection, moisture barrier, and a packing list that matches the configuration sheet item for item.
If your team cannot travel to Foshan, we send the inspection record to you and hold shipment until you sign it off. If you would rather appoint a third-party inspector, we work with them on site — just name them before production starts so their visit is scheduled into the build.
Packing, Freight and Customs Documentation
A spa shell ships as a single bulky, fragile unit, so the crate matters as much as the product. We arrange sea, air or rail freight with forwarding partners, handle the export paperwork — commercial invoice, packing list, certificate of origin and any import permits your country requires — and provide shipment tracking through to delivery.
Settle three commercial terms in writing before booking the vessel: the Incoterm and who pays what leg, whether cargo insurance is included or arranged on your side, and the exact delivery address with an unloading plan. A 3-metre crate needs a forklift or crane at the far end, and a delivery quote that omits unloading equipment surprises the buyer, not the seller. Import duty and any local registration requirements sit with you as importer in most arrangements; ask your broker to confirm the tariff classification against the packing list we send, not against a catalogue description.
Receiving, Installation and Commissioning
On arrival, inspect the crate before the carrier leaves, then check the unit against the packing list while the packaging is still intact. Photograph any transit damage immediately — a claim filed after the crate is destroyed rarely succeeds.
Our installation and after-sales support covers on-site guidance, inspection and snag lists, warranty coverage and spare parts supply. What we cannot do is certify work against a building code we are not licensed under. The practical split on an overseas project is this: we commission the spa itself — hydraulics, controls, sanitation, jet performance — with your contractor, and your local licensed trades handle mains connection, RCD/protection devices, structural support and any pool or spa barrier required by your council. Agree that boundary in the contract so nobody assumes the other side has it.
Spare Parts and Long-Term Support
Ask what fails, what you should hold on site, and how fast a replacement reaches you. On the WS-PC01 the consumables are pump seals, filter media, jet fittings and the control interface; keeping a small stock of seals and filters on site removes most waiting time.
Before signing, get written answers to four questions: which parts are stocked at the factory versus made to order, how replacement parts are shipped (courier or consolidated with another order), what the warranty covers for shell, plumbing, pumps and controls separately, and who you contact when something goes wrong out of hours. We answer these on a named contact rather than a shared inbox, because project owners dealing with a spa in month eighteen should not have to re-explain their configuration.
A Practical Checklist for the Enquiry
Send these six items with your enquiry and you will get a quotable specification rather than a vague estimate:
- Site drawing or photo of the intended position, with dimensions and access route from the street.
- Structural note for the supporting slab, deck or pedestal frame.
- Available electrical supply: phase, voltage, and where the isolator will sit.
- Required extras — heat pump, UV sterilisation, sand filtration, insulation grade, steps.
- Destination port and delivery address, plus who is acting as importer.
- Target on-site date, working backwards from your programme rather than forwards from today.
As a one-stop furniture and building materials supplier, we supply WS-PC01 alongside the outdoor collections, wall finishes, lighting and cabinetry that surround it on the same project — which is usually where the real saving appears, in one coordinated specification instead of six separate ones.
SANTERSON — furniture and building materials manufacturer, Foshan, China. Established 2008. Design consultation, custom and OEM production, door-to-door logistics, installation guidance and after-sales support. Contact us to discuss your spa specification.