An open-plan kitchen is rarely the item that delays a handover — until the cabinetry package arrives with the wrong dimensions, an unspecified panel finish, or appliances that do not sit in the carcass as drawn. Because the cabinetry is visible from the living area and used every day by guests or residents, it carries both aesthetic and commercial risk. The practical answer is a procurement brief that states what must be decided now and what can wait for shop drawings. This guide sets out the fields to specify for open concept kitchen cabinets, using the language project buyers, contractors and interior designers already work with.

What "open concept" changes in a cabinet specification

In a closed kitchen, the cabinetry is judged at arm's length. In an open-plan layout, the same run of doors and worktops becomes part of the living room elevation, viewed across several metres. Three consequences follow directly, and each one belongs in the brief rather than in a site conversation.

  • The cabinet exterior is interior finish. Door profile, colour and surface texture must be coordinated with wall panelling, joinery and flooring specified for the living zone, not chosen as a kitchen-only decision.
  • Storage has to absorb clutter that used to be hidden. Open shelving, glass-front units and small appliances are on display, so the brief needs defined closed-to-open ratios and dedicated housing for countertop equipment.
  • Services cross a shared space. Extraction, drainage and appliance ventilation are planned against an open volume rather than a separate room, which affects duct routing, noise expectations and the position of tall units.

For project work, the useful definition is not decorative. An open concept kitchen package is a set of interior fixtures — base units, wall units, tall units, island carcasses, worktops and matching hardware — customised to the plan and delivered as one coordinated supply.

The brief fields that decide price and programme

Enquiries that omit these fields come back with indicative pricing that cannot be compared between suppliers. Fill them in before requesting a quotation.

Brief fieldWhat to stateWhy it matters at quotation stage
Scope and unit countLinear metres of run, number of island/tall units, per-room schedule for each typology (apartment type, suite type, villa).Bulk project pricing is built on grouped quantities; a single mixed list hides the repeat typologies that drive cost.
Layout and dimensionsSet-out drawings with finished wall lines, floor levels, ceiling heights, appliance schedule with model numbers and clearances.Custom dimensions and internal layout are made to order; late dimensional changes restart production.
Door style and profileFlat panel, handleless, shaker or framed; edge detail; matching wall unit and tall unit treatment.Profile choice sets panel construction and hardware type. Handleless minimalist kitchen cabinets, for example, require a profile that supports touch-to-open or recessed pulls.
Panel material and surface finishBoard substrate, decorative surface (lacquer, laminate, veneer), sheen level, colour reference from a named system.Colour names are not transferable between finishes. A named reference plus sheen avoids match disputes on site.
Hardware and functional itemsHinges and slide specification, soft-close requirement, pantry and corner solutions, integrated appliance range, drawer interiors.Matching hardware — hinges, drawer slide rails, support legs, connecting brackets — can be supplied with the package; listing it prevents separate local sourcing.
Durability dutyExpected use level: hotel suite, serviced apartment, private residence; requirement for wear resistance, water resistance and cleaning regime.Duty level justifies the surface and edge treatment chosen, which is what auditors and operators ask about at handover.
Delivery and interfaceIncoterms and delivery address, container grouping with other fixtures, installation sequence, who performs final fixing and snagging.Cabinetry that arrives before the wet trades finish cannot be installed; the interface must be written down, not assumed.

How to describe the open style without inviting substitutions

"Modern" and "minimalist" are too broad to protect design intent. Describe the style in buildable terms:

  • Line and proportion. Continuous horizontal reveals, aligned handle lines or a fully handleless face, consistent gap dimensions between doors.
  • Visual continuity with the living zone. The same door material repeated on tall units, media joinery and pantry walls, so the kitchen reads as fitted joinery rather than equipment.
  • Open elements defined explicitly. Which bays are open shelving, which are glass-front display, and whether integrated lighting is required in those bays.
  • Worktop junctions. Upstand treatment, sink cut-out type, hob mounting method and the reveal where the worktop meets tiling or panelling.

This wording gives a manufacturer what they need to customise layout, door style, colour and surface finish against your drawings — exactly the option set offered on custom open plan kitchen cabinetry for hotel suites, serviced apartments and residential renovation.

Grouping cabinetry with the rest of the fit-out

Open-plan kitchens do not sit alone in a project package. Flooring, wall finishes, lighting, bathroom fixtures and loose furniture share the same coordination meetings and the same freight plan. Splitting them across many suppliers multiplies interface risk: colour matches break between trades, deliveries collide, and one late item holds the whole floor.

A single supplier covering furniture and building materials reduces that overhead. Cabinetry can be ordered alongside engineered flooring, wall panels, lighting and sanitary ware for the same building, with one production schedule and one consolidated shipment. Where a project needs non-standard sizes, finishes or branding, custom and OEM work covers bespoke material finishes, textures and prototyping before series production.

Write the brief as a package, not as a product line: cabinetry, worktops, hardware, adjacent joinery and finishes in one schedule. Suppliers price and programme packages far more accurately than isolated items.

Approvals sequence that protects the site programme

  • Stage 1 — design proposal. Space planning, cabinet set-out, elevations and 3D visualisation for the open-plan view. Sign off the layout before any panel is cut.
  • Stage 2 — quotation and detail confirmation. Confirm dimensions, door profile, colour reference, hardware list and appliance range in writing. Approve a physical sample of the door and worktop junction for the room type that repeats most.
  • Stage 3 — production, shipment and follow-up. Production follows approved details; freight is arranged by sea, air or rail with customs paperwork prepared, and delivery is tracked to site. Confirm storage conditions on site before cabinets land.

Two decisions must be closed at Stage 2 and never later: the colour and sheen reference, and the appliance schedule. Both are visible in an open-plan room and both are expensive to change once carcasses are made.

Common specification failures — and the line that prevents each

  • Cabinet colour does not match adjacent joinery. Prevent by listing one shared finish reference across cabinetry, wall units and any matching built-in storage in the same schedule.
  • Handleless fronts supplied without the correct profile. Prevent by stating handle type or handleless method per door line, not once for the whole kitchen.
  • Countertop appliances left on display. Prevent by requiring a housing or closed bay for each listed appliance in the equipment schedule.
  • Worktop and splashzone junction unresolved. Prevent by including a detail drawing for the junction in the approval set.
  • Deliverables blocked on site access. Prevent by naming the installing party and the required sequence in the delivery terms of the order.

A short checklist for the procurement file

  • Room-by-room cabinet schedule with linear metres and unit counts per typology
  • Set-out drawings on finished dimensions, plus floor and ceiling levels
  • Door profile, panel material, surface finish, colour reference and sheen
  • Hardware list including soft-close requirement and functional fittings
  • Appliance schedule with models and clearances; closed housing for each
  • Worktop material, thickness, edge and junction details
  • Duty level per room type and the cleaning regime to be handed over
  • Incoterms, delivery address, container grouping, installation sequence

Putting it into practice

If you are assembling a cabinetry package for apartments, hotel suites or villas, send the schedule and drawings above with your enquiry. SANTERSON works as a China-based manufacturer and one-stop supplier of furniture and building materials, supplying custom built-in kitchen cabinetry with matching hardware for commercial and residential interiors, alongside the flooring, wall finishes, lighting and sanitary fixtures that surround it. Enquiries can be sent to santerson.com/contact; include room types, quantities and target delivery window so the quotation reflects the whole package rather than a single product line.