A compact swim spa looks simple on a specification sheet. One footprint figure, a jet count, a power total — and the enquiry is closed. In practice, the model that works on paper can still fail on site if the project brief was incomplete. Outdoor Swim Spa WS-PC01A is a good example: it suits a defined group of villas, terraces and resort rooms, and it is the wrong choice for others. The difference is decided by project details, not by marketing preference.
Below is how our project team reads the brief before quoting WS-PC01A — and what buyers, contractors and designers should have settled before they send us a drawing.
Start With the Room, Not the Model Number
The catalog footprint for WS-PC01A is 3000 × 930 mm. That number tells you the vessel envelope; it does not tell you whether the unit can be delivered, positioned, connected and maintained on your site. Before we confirm a configuration, we ask for four measurements and one route:
- The clear opening of the pit, terrace cut-out or recess where the spa will sit, including the tolerance around the shell.
- The access path from the delivery vehicle to that position — door widths, stair turns, lift dimensions, garden gates and any overhead obstruction.
- The structural support available under and around the unit, particularly for elevated terraces and upper-floor balconies where a filled shell loads the slab.
- The service gap needed later for the pumps, filter and control system. A spa installed flush with no access panel becomes a maintenance problem on day one.
Where the site cannot provide a straight path in, we look at alternative configurations in the swim spa and pool range, or at a shape built to fit the space. A unit that fits the plan but not the access route is not a viable option.
Match the Water System to How the Spa Will Actually Be Used
WS-PC01A is configured around hydrotherapy and relaxation rather than lap swimming. The catalog specification shows 28 jets served by two water pumps, one filter pump, a single control system, LED lighting with nine small LED lights, ozone sanitation and a total power figure of 3.25 kW.
Catalog specification — Outdoor Swim Spa WS-PC01A
- Catalog dimensions: 3000 × 930 mm
- Jet total: 28 pcs | Water pump: 2 pcs | Filter pump: 1 pc
- Control system: 1 set
- LED lights: 1 pc; 9 small LED lights
- Total power: 3.25 kW
- Features shown: water jets, LED lighting, ozone
- Swim training system: not listed for this model
Availability and compatibility of optional items vary by configuration; confirm the selected build before ordering.
Two details in that list decide whether the model fits your programme:
1. Intended use
If the brief calls for counter-current swimming training, this is not the right family of unit. We would move the specification toward a longer shell in the range — models such as WS-PC05 (5000 × 3000 × 1100 mm) or WS-PC07A (7000 × 3000 × 1470 mm) carry more pumps, more jets and a materially higher power total. Choosing the shorter model because it is cheaper, while the client still expects to swim against a current, produces a complaint you will read about in the warranty file.
2. User profile and session pattern
For a hotel gym, a wellness suite or a private villa used for evening soaks and post-training recovery, the jet layout and 3.25 kW total load are the reason this model is specified. Ask who uses it, how often, and at what water temperature. A spa in a resort that runs from early morning to late night has a different duty cycle from one used three times a week at home, and that changes which heating and filtration options we recommend.
Power, Insulation and the Climate You Are Building In
Total power is where most overseas buyers get caught out. Confirm with your electrician what supply is available at the plant room — phase, capacity and the dedicated circuit the spa needs — before the shell is manufactured. The catalog figure covers the standard build; add a heat pump or extra pumps and the load changes.
For outdoor installations in cool or variable climates, insulation and the heating choice belong in the quotation from the start, not in a change order after delivery. Catalog-listed options for this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. We specify these per project:
- Heat pump where the spa runs year-round outdoors and running cost matters.
- Insulation package for exposed terraces, rooftops and garden positions with overnight temperature drops.
- UV sterilization alongside ozone for shared or high-frequency use where water-quality control is a management concern.
- Sand filtration where the site prefers a different filtration approach from the standard filter pump arrangement.
- Steps and access detailing matched to the finished deck height, not left to the installer on site.
These are configuration decisions with price and lead-time consequences. Send us the location and the expected use pattern and we will tell you which of them are necessary rather than optional.
Where WS-PC01A Fits Best
In our project work, this model is specified where space is the binding constraint and hydrotherapy is the goal:
| Project setting | Why WS-PC01A is chosen | What to verify first |
|---|---|---|
| Private villa terrace or courtyard | Compact envelope; hydrotherapy and LED ambience without a full pool structure | Slab loading, deck finish detail, drainage around the unit |
| Boutique hotel wellness floor | Fits a single treatment or recovery room; ozone supports water-quality routines | Plant-room power, noise separation from guest rooms, service access |
| Show home or display garden | Demonstrates an outdoor spa in a footprint buyers can relate to | Visitor access, safety barriers, duty cycle for demos |
| Resort garden pavilion | Pairs with pergolas, loungers and outdoor seating in one landscape scheme | Ground preparation, year-round climate protection, guest-use frequency |
Where the client wants a larger water surface, a waterfall feature or a spa shaped around an irregular terrace, we move to other entries in the range, including premium outdoor swim spas with massage jets and water features and customizable-shape outdoor spas built in square, round, oval or curved forms to suit the space.
Coordination With the Rest of the Project
A swim spa rarely arrives alone. In villa and hospitality work it lands inside a wider package — outdoor furniture on the deck, flooring and cladding around the water edge, lighting for night use, and in many cases bathroom fixtures and cabinetry in the adjoining rooms. Splitting that scope across several suppliers is how interface problems appear: a finished deck level that no longer matches the spa steps, or a power run terminated in the wrong place.
We handle this as one procurement under turnkey interior project solutions. The workflow runs through consultation, design and planning, production, logistics, installation and after-sales, with the swim spa treated as part of the same drawing set as the joinery, finishes and outdoor furniture. For buyers who want the shell itself built to their dimensions and finish rather than a catalog size, our custom and OEM service covers bespoke design and prototyping alongside other custom products.
Freight is the second detail that decides whether an installation date holds. Our logistics team arranges freight forwarding by sea, air or rail, with customs paperwork, packaging and container loading planned around the site address — see furniture logistics and door-to-door delivery. Tell us the delivery point early: a rooftop terrace in a city apartment block and a ground-level villa garden need completely different handling, and that affects packaging as much as the crane or lifting plan.
The Pre-Quotation Checklist We Work From
Send these before we quote WS-PC01A
- Site plan and the position of the spa, with finished deck levels marked.
- Delivery route from kerb to position, including any lift or stair constraints.
- Available electrical supply at the plant area: phase, capacity, distance of run.
- Intended use — hydrotherapy only, or swimming training as well.
- Expected user numbers and daily operating hours.
- Local climate and whether the unit will run through winter.
- Options required from the catalog list: heat pump, insulation, UV, sand filtration, steps.
- The rest of the outdoor and interior package you want quoted with it.
With those details we can confirm whether WS-PC01A is the correct model or point you to a better fit in the range, and quote a configuration that arrives ready for the site you actually have. Specifications on this page are transcribed from our catalog listing for the model; included equipment and electrical requirements should be confirmed for the selected configuration.
Browse the full swimming pools and swim spas range, or send your drawings and site photographs to our project team for a configuration review.
Dimensions, jet counts and power figures shown above follow the catalog entry for WS-PC01A. Confirm the final configuration, included equipment and electrical requirements with us before ordering.