A swim spa shell that is eight metres long can be specified by three suppliers in an afternoon and still deliver three very different machines. The differences sit in what each factory counts as standard, how the water system is documented, and who answers when a pump fails on site. This guide walks through the shortlisting steps we suggest for anyone sourcing the Outdoor Swim Spa WS-S08M or a comparable unit in its size class, with a supplier scorecard you can send out as-is.
Start With the Size Class, Not the Model Number
Model codes are internal to each factory. WS-S08M is our own reference; another supplier may call an almost identical shell by a completely different name. What actually travels across suppliers is the footprint and the water-system load, so put these in your first enquiry:
- Cabinet length, width and height as installed, not as shipped.
- Water depth at the deepest seat, which drives seating comfort and how the jets sit relative to shoulders and lower back.
- Total connected power in kW, because that number decides your electrical work before you ever pour a slab.
- Which items are included in the base price and which appear only on an option list.
For reference, our catalog entry for WS-S08M lists cabinet dimensions of 8020 × 2260 × 1280 mm. That is a long single-bay shell rather than a two-zone plunge-and-swim layout, which suits a villa terrace, a resort garden or an estate boundary where the run of deck is generous but the width is constrained.
Read the Specification Sheet as a Buyer, Not a Shopper
Marketing pages lead with jet counts and LED colours. Procurement should lead with pumps, control and treatment, because those are what you maintain for ten years. Here is how our own sheet reads, item by item, and what each line tells you to ask other suppliers for.
| Catalog line (WS-S08M) | What it means for your enquiry |
|---|---|
| Water pump: 2 pcs | Two circulation pumps rather than one. Ask every supplier to state how many pumps are included and whether jet pressure is shared across zones or driven separately. |
| Filter pump: 1 pc | Filtration runs on its own circuit. Confirm the filtration cycle time and what micron rating the filter cartridge uses, so replacements are not a guessing game later. |
| Jet total: 58 pcs | A jet count without a layout drawing tells you very little. Request a jet map showing position by seat, and ask whether jets are stainless or plastic and how they are mounted to the acrylic shell. |
| Control system: 1 set | One control set for the whole unit. Ask what the controller displays (temperature, filtration status, fault codes) and whether it can be replaced by a local technician rather than shipped back. |
| LED lights: 1; 26 small LED lights | Fixture counts matter mainly for replacement. Ask for the fitting type and whether spares are stocked after the project is handed over. |
| Total power: 6.95 kW | This is connected load, not running cost. Give your electrician the figure and ask the supplier which breakers, cable size and isolation they specify for that load. |
| Features shown: water jets, LED lighting, ozone | Ozone is a sanitisation aid, not a replacement for your routine water chemistry. Ask what maintenance schedule the supplier expects for the ozone generator. |
One line on that sheet deserves particular care. The captured specification for this model does not list a swim training system. If your brief calls for counter-current swimming against a current, say so in writing and ask whether a swim unit is available for this shell, what it costs, and how it changes the total power figure. Do not assume the current exists because the word "swim" appears in the product name.
The same caution applies to options. Our catalog lists control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps as accessories, with availability varying by model. Treat every option list the way you would treat a hotel FF&E schedule: priced line items, confirmed against the exact unit you are ordering, signed off before production starts.
Score Suppliers on Six Things You Can Verify
Shortlisting collapses into a handful of questions where a weak answer is obvious. We would weight them like this:
1. Does the factory own the process?
Ask which parts are made in-house: acrylic shell forming, cabinet and frame assembly, plumbing harness, control wiring, final test. A supplier who forms shells on their own line can adjust depth and seat geometry; a trader cannot. Our Custom & OEM service covers bespoke material finishes, prototyping and private labelling, which is what you want behind a project-specific configuration.
2. Is there a documented pre-shipment test?
Request the actual test record: fill time, leak check under full hydrostatic load, jet and pump run time, controller fault check, heater cut-in behaviour. A factory that tests every unit will send you a signed sheet without hesitation.
3. How is it packed and shipped?
An eight-metre shell is a freight problem before it is a plumbing problem. Ask how the unit is crated, whether it ships as one piece or in sections, what container type it needs, and who handles customs paperwork. We arrange sea, air and rail freight with commercial invoices, packing lists and certificates of origin prepared on our side, plus door-to-door delivery.
4. Who sets the site preparation spec?
Slab loading, drainage around the cabinet, an equipment access panel, and a dedicated supply for the connected load should come from the supplier as a drawing, not be improvised by your builder. Ask for that drawing before you commit to foundations.
5. What happens after handover?
Ask in plain terms: who supplies spare pumps, filters, jets and controllers in year three, at what cost, and how fast. Warranty scope and exclusions should be in writing before payment, not inferred from a brochure.
6. Can they show comparable installed work?
Project references with named locations beat renderings. We have delivered villa and hospitality packages in Willoughby, Perth, North Turramurra, Melbourne and Sydney, so the coordination around Australian site access, import documentation and staged delivery is familiar territory for our project team.
Compare Within the Range Before You Fix a Model
Shortlisting one model number too early locks you into one configuration. Look at how neighbouring units differ and you will see which specification lines actually matter to your site:
- Outdoor Swim Spa WS-S07M — 7000 × 2200 × 1480 mm, 40 jets, three water pumps, total power 10.75 kW, with waterfall and four water columns shown as features.
- Outdoor Swim Spa WS-S08B — 7800 × 2200 × 1500 mm, 98 jets, four water pumps, two filter pumps, two control sets, total power 14.6 kW.
- Outdoor Swim Spa WS-S10 — 10000 × 2200 × 1420 mm, 76 jets, total power 7.65 kW.
Read those three lines against your site and the trade-offs become concrete. A deeper cabinet at a shorter length changes seating posture and jet placement. A higher jet count with more pumps can more than double connected power, which changes the electrical work and the running profile. That comparison is worth doing before you send an RFQ, because it tells you what you are willing to give up.
If the site geometry does not suit a rectangular cabinet at all, ask whether the shell can be formed to another shape. Our Customizable Shape Outdoor Spa is built to square, round, oval and curved outlines for terraces, gardens and leisure decks where a standard cabinet will not sit cleanly.
Send One RFQ to Every Shortlisted Supplier
Comparison only works when the answers arrive in the same format. Put these items in the request and you will be able to read three quotations side by side:
- Cabinet dimensions and water depth, stated as installed.
- Pump quantities, filter type and micron rating, jet count with a layout drawing.
- Total connected power in kW, plus the recommended supply arrangement.
- Treatment method included (ozone, UV) and what is optional.
- Insulation construction and cover specification, since these drive heat retention.
- Packing method, container type, port of loading and delivery term quoted.
- Warranty scope by component, spare-parts availability, and the named contact for after-sales.
- Lead time from confirmed drawings to ex-works, stated separately from transit time.
Three answers that should end a shortlist conversation
"We can send the test record once you have ordered." The test record exists before your order or it does not exist after it.
"Power depends on the configuration, roughly six to seven kilowatts." Ask for one figure for the exact specification you quoted. A range in a written quotation becomes an invoice surprise.
"Warranty is two years." Ask which components: shell, pump, heater, controller and cabinet are five different risk profiles and often carry different terms.
Where a One-Stop Supplier Changes the Workload
A swim spa rarely arrives alone on a villa or resort project. It lands alongside loungers, shade structures, paving, wall cladding and lighting, and every separate supplier means another drawing set, another container, another customs file and another party to blame for a gap. Sourcing those items through one manufacturer removes the handover seams: drawings, production slots and shipment are coordinated by one team, which is how our turnkey project service runs across villa and hospitality work. Our Swimming Pools and Swim Spas range then sits inside the same package as the surrounding outdoor furniture and finishes.
Send us your site dimensions and brief
Share the deck or garden layout, the intended use (lap swimming, hydrotherapy, children's use), and your target connected power. We will confirm which configuration of WS-S08M fits, what is standard versus optional, the electrical specification for your electrician, and the packing and door-to-door plan to your site.
Contact PHILLIP — Phone / WhatsApp +86-13928214007 — santerson@qq.com
Figures quoted for WS-S08M and neighbouring models are transcribed from the catalog specification pages. Included equipment, options and electrical requirements vary by configuration; confirm them in writing against your order before production begins.