On most villa and hospitality fit-outs, the storage wall is specified late. The joinery package has been tendered to one workshop, the lighting to another, the flooring to a third — and by the time someone draws the media wall, the wall finish, the floor build-up and the downlights have all been fixed without it. That is usually where a floating modular system stops working: not because the unit is wrong, but because three different suppliers were never asked to coordinate with each other.

Santerson Floating Modular Systems sit inside a Modular Living Systems range made for residential projects, where layout, dimensions, material and finish are set per project rather than chosen from a fixed catalogue length. That flexibility only pays off when the unit enters the package early. Below is how we place these systems — and the matching shelving, floor-to-ceiling and lighting variants — inside one coordinated fit-out scope.

What "floating" changes on site

A floating modular system is wall-supported rather than floor-standing. Three consequences follow, and each one touches another trade:

  • The substrate has to be prepared. A wall-hung unit needs solid blocking or a suitable backing frame behind the finishing lining. If the modular unit is decided after the wall lining is closed up, the wall has to be opened again.
  • The floor build-up becomes visible. With the carcass off the floor, the skirting line, the flooring edge detail and any expansion gap run beneath the unit and need resolving on a drawing, not on site.
  • Services are exposed by design. Sockets, TV wiring, low-voltage cabling and any integrated lighting have to sit behind or within the module. Late decisions here leave visible trunking or surface conduit.

None of this is difficult. It simply has to be decided once, by one party, with all three trades reading the same drawing.

Where these systems are specified

The Santerson Floating Modular Systems page describes configurable floating modular living systems for residential projects, with made-to-measure sizing and material and finish options. In practice we see the range used in three situations:

  • Villa living and media walls. A wall-hung composition keeps the floor line clear, which lets a long room read wider and allows engineered timber flooring to run uninterrupted to the wall.
  • Guest rooms and serviced apartments. Wall-supported units mixing open shelves with closed compartments are easier to clean around than freestanding cabinetry, and the same module repeats across room types.
  • Show apartments and display suites. Because dimensions and finishes are set per project, the unit can be scaled to the display wall instead of the display wall being scaled to the unit.

Where the composition needs to reach the ceiling — a library wall or a full-height storage run — Santerson Floor to Ceiling Modular Systems cover that case, and Santerson Mixed Open & Closed Systems combine open display bays with closed storage in one run. Where the wall is short or the requirement is shelving only, Santerson Floating Modular Shelves sit in the Modular Shelving Systems collection with the same made-to-measure approach.

Coordinating the modular unit with the rest of the package

This is where a single supplier for fixtures and finishes earns its place. As a one-stop furniture and building materials supplier, we produce modular living systems alongside the surfaces and fittings they meet: wall panelling, engineered wood flooring, aluminium ceiling panels, lighting, kitchen cabinetry, wardrobes and bathroom fixtures. When these come out of one production programme, four interfaces get decided together rather than passed between workshops:

InterfaceWhat gets resolved in one go
Modular unit and wall finishMatching veneer, lacquer or laminate between the module and adjacent panelling; setting-out of niches relative to panel joints.
Modular unit and flooringFloor level under the wall-hung unit, skirting treatment, and transition details at thresholds.
Modular unit and lightingRecessed profiles and driver positions for Santerson Modular System with Lighting (Living System) and Santerson Integrated Lighting Systems, plus the electrical rough-in behind them.
Modular unit and ceilingDownlight and cove positions relative to the head of the unit, particularly where aluminium ceiling panels are used.

The output is one coordinated set of setting-out drawings covering all four interfaces, rather than four separate shop drawings that were never compared. For projects needing layout work before anything is fixed, Interior Design Services cover space planning, furniture layouts and 3D renderings, and continue into drawing and production coordination with on-site guidance.

How the custom/OEM route affects the modular unit

These are not off-the-shelf items. Under our Custom & OEM Service, a project can specify dimensions, material and finish per room type — wood, metals, engineered stone and laminates among the material options, with branding such as engraving or logos where required. For a developer repeating a unit across several villas or guest rooms, that means one approved module drawing and a consistent finish schedule across batches, instead of re-sourcing each floor.

Two points are worth settling in the first enquiry round, because they move price and programme more than anything else:

  • The opening widths and clear heights the module must fit, taken from site survey rather than architectural drawings alone.
  • The finish sample you want reproduced across batches — veneer direction, sheen level and edge treatment are where repeats most often drift.

Delivery, installation and handover as one sequence

Wall-hung units arrive late in the programme, after wet trades and floor finishes are complete. Under Logistics & Door-to-Door Delivery, freight is arranged by sea, air or rail with customs paperwork handled alongside it, and units are packed to suit the installation sequence rather than shipped as one mixed container. On site, Installation & After-sales Support covers fixing, inspection and snag resolution — which is where the substrate preparation described earlier is finally checked against the setting-out drawing. Transit times, import terms and delivery scope are confirmed project by project rather than assumed.

Before releasing a modular unit into a package: five checks

  • Is the wall substrate and blocking detail agreed with the wall contractor before lining?
  • Are sockets, TV/AV cabling and driver positions drawn on the same sheet as the module?
  • Has the finished floor level been confirmed against the underside of the wall-hung unit?
  • Is the finish sample matched to the adjacent panelling, not approved in isolation?
  • Are dimensions taken from site survey for every room where the module repeats?

Bringing it together

A floating modular system works in a fit-out package when it is treated as an interface rather than a piece of furniture dropped in at the end. Specify it made-to-measure, with the wall, floor and lighting decisions resolved on one drawing, and the unit repeats cleanly across rooms and phases. The Santerson Modular Living Systems range — floating, floor-to-ceiling, mixed open and closed, and integrated-lighting variants — is produced within a single scope covering furniture, interior fixtures and building materials, so those interfaces are coordinated by one team from design through to handover.

Send the room schedule or setting-out drawings for your villa, apartment or hospitality project and we will price the modular living systems together with the matching wall, floor and lighting finishes as one package.

Contact: PHILLIP · Phone / WhatsApp: +86-13928214007 · Email: santerson@qq.com · Contact page