A swim spa is one of the few outdoor products on a villa or resort bill of quantities that carries its own sub-project behind it: structure, water treatment, power, control and access all have to arrive together. The Outdoor Swim Spa WS-SP500 is a compact 5 m model in our configurable swim and hydrotherapy range, and it is a good example of how quantity planning and product coordination should be handled before an order is placed. The notes below follow the specification shown on the product page; final configuration is always confirmed with our project team.

What WS-SP500 Delivers, and Why That Drives the Quantity List

The catalogue specification for this model lists overall dimensions of 5000 × 2500 × 1600 mm, one control system, one swim training system, one filter pump, six water jets, four LED lights and a total power figure of 9.35 kW. The features shown on the page are water jets, LED lighting, ozone and a swim training system.

Read that list as a procurement statement rather than a feature list. A single spa already contains several separate line items — shell, pumps, jets, lighting, control, disinfection — and each one has to be matched with the site conditions it will sit in. That is exactly why we recommend treating swim spas as a coordinated package on the Swimming Pools and Swim Spas schedule, not as one line under "landscape extras".

Step 1: Count Units by Zone of Use, Not by Plot

Quantity planning starts with how the spa will actually be used across the project:

  • Private villa. One unit is normally specified per plot, placed on a terrace, deck or garden platform. Where a large site has both a main garden and a secondary leisure terrace, decide early which one carries the spa — relocation after installation is not practical.
  • Boutique hotel or resort villa cluster. Count one unit per villa that is marketed with hydrotherapy, then check whether shared-guest units need a different access and maintenance arrangement from in-villa units.
  • Spa, clubhouse or wellness facility. Units are usually grouped so they share plant rooms, filtration service points and changing access. Grouping affects both the spa quantity and the location of every ancillary item below.

Once the count is fixed, mark each unit with its orientation and exposure on the drawing. Two identical spas on opposite sides of a building can need different insulation, enclosure and access arrangements.

Step 2: Split the Bill into Core Unit and Coordination Items

A common estimating error is ordering only the spa shell and discovering late that the balance of the system was never scheduled. Our catalogue for this range lists optional accessories including control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so each item must be confirmed against the selected configuration rather than assumed from a brochure.

GroupItems to schedule per unit or per group of unitsCoordination point
Core unitSpa shell, control system, swim training system, filter pump, water jets, LED lights, ozoneConfirm which of these are included in the selected configuration and which are quoted separately.
Water treatmentUV sterilisation, sand filtration, spare filter media where specifiedService access and drain point must be on the site drawing.
ThermalHeat pump, insulation packagePower draw and plant location are confirmed together with the electrical engineer.
Access and safetySteps, deck edge detail, handrail where required by designAgree with the landscape or civil package who supplies the surround.
Site worksFoundation or plinth, waterproofing, drainage, cable containmentFixed levels must be agreed before spa dimensions are frozen.

The point of the table is simple: every row needs an owner and a quantity. Where a row is left blank, that scope usually turns into a variation later in the job.

Step 3: Confirm Power and Control Before You Order

The WS-SP500 page shows a total power figure of 9.35 kW for the configuration as catalogued. Treat that number as the starting point for two conversations, not as the final electrical design:

  • With the electrical engineer. Confirm supply capacity, protection, cable routing and the location of the isolator relative to the spa. Adding a heat pump or an additional water pump changes the load, so the electrical drawing should be issued after the configuration is settled, not before.
  • With the operator. One control system is listed per unit. On multi-unit projects, agree whether each spa is operated independently or managed from a central point, because that decision affects both cabling and maintenance routines.

Included equipment and electrical requirements for the selected configuration should always be confirmed with us before order placement. We would rather settle this at quotation stage than during site installation.

Step 4: Coordinate the Spa with the Rest of the Outdoor Package

A swim spa is rarely specified alone. In villa and resort projects it sits alongside Outdoor Furniture for Villas and Resorts — loungers, shaded pergolas, hardtop swing benches and poolside dining — and those items have to be coordinated around the same deck levels, clearances and maintenance routes.

  • Levels and clearances. Fix the finished deck level first. Loungers, steps and plant access all reference it.
  • Material continuity. Where a project calls for matching tones between the spa surround, pergola frames and poolside furniture, request the material and finish options early so the palette is confirmed once rather than per order.
  • Where space is irregular. If the plot cannot take a standard rectangular footprint, our Customizable Shape Outdoor Spa supports customised shapes such as square, round, oval and curved designs for gardens, terraces and leisure areas. Custom geometry changes the quantity sheet, so it should be raised at design stage.

Step 5: Compare Within the Range Before Fixing Quantities

Quantity planning is easier when the whole family of models is on the table. The same range includes the Outdoor Swim Spa WS-SP500-MS, which shares the 5000 × 2500 × 1600 mm catalogue dimensions but lists a water pump and a higher jet count on its product page. The Outdoor Swim Spa WS-SP600 is listed at 5900 × 2500 × 1600 mm for sites with more length available.

The practical lesson: identical footprints can hide different equipment sets, and a longer shell changes both the deck layout and the delivery route. Compare the published specifications side by side, then confirm each configuration in writing before quantities are locked.

Quantity Planning Checklist

  • Unit count agreed per zone of use, with location and orientation marked on the drawing
  • Core unit and coordination items separated into distinct bill lines with named owners
  • Included versus optional equipment confirmed against the selected configuration
  • Electrical load, protection and isolator position confirmed by the engineer after configuration is fixed
  • Foundation, waterproofing, drainage and cable containment scheduled as site works
  • Deck levels, steps and surround scope agreed with the landscape or civil package
  • Outdoor furniture and shading coordinated to the same levels and finish palette
  • Delivery route, access width and lifting method checked against the finished site condition
  • Spare parts and maintenance routine agreed before handover
All dimensions, power figures and equipment counts quoted above are transcribed from the published catalogue specification for the model as catalogued. Availability and compatibility of options vary by configuration; confirm the selected configuration, included equipment and electrical requirements with our project team before ordering.

Send us your swim spa schedule

Share the unit count, site levels and required options for your villa or hospitality project, and we will confirm the WS-SP500 configuration, the coordination items and what is included in each line.

How Our Team Supports This Process

As a one-stop furniture and building materials supplier, we handle a swim spa order as part of the same package as the rest of the outdoor and interior schedule. Under our Turnkey Solutions service, that covers design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, and finally installation and handover. If your drawings are still at concept stage, our Interior Design Services cover layout planning and 3D visual renderings for indoor and outdoor schemes, so the spa and its surroundings can be reviewed as one space before quantities are fixed.

For projects where finishes, dimensions or branding need to change, our custom and OEM work covers bespoke material finishes and textures as well as OEM manufacturing. Send us the spa count, the deck drawing and the target handover date, and we will return a configuration sheet with quantities you can price.