An outdoor swim spa rarely arrives on site alone. On a villa or resort package it sits beside poolside loungers, a shaded pergola, hard landscaping and an electrical feed that has to carry the load. That is exactly where budgeting goes wrong: the unit is priced, then everything around it is discovered later. This article walks through how we scope and cost Outdoor Swim Spa WS-PC07ST when it is one line in a longer bill of quantities, so the number you approve at quotation stage is the number you actually pay.
Start With the Base Unit, Not the Line Item
WS-PC07ST is a 7 m-class swim and hydrotherapy unit in our configurable range. The catalog specification we work from lists the shell at 7000 × 2400 × 1470 mm, with one control system, one swim training system, one filter pump, six water jets, four LED lights and a total power figure of 6.55 kW. Treat those figures as the starting point for a quotation rather than a finished order: what is included, what is optional and what your site must provide are settled separately, line by line.
Two things follow from this. First, the delivered price of the spa itself is only part of the budget. Second, once you know which items sit outside the base unit, you can see how they interact with the other products in the same package — and that is where real savings appear.
The Cost Blocks to Price Separately
Split the swim spa into blocks before you compare any quotation. Each block behaves differently when quantities change or when a project phase is deferred.
| Budget block | What to confirm in writing |
|---|---|
| Unit and shell | Catalog dimensions, finish, access for delivery and placement, whether the unit is installed above ground, semi-recessed or fully recessed. |
| Included equipment | Control system, swim training system, filter pump, jet count and LED fittings as listed for the selected model. |
| Optional equipment | Catalog-listed options such as UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model. |
| Power and controls | The total power figure for the configuration you have chosen, plus local supply capacity, protection and circuit routing. |
| Site works | Slab or plinth, drainage, waterproofing, access route and any lifting equipment. Usually carried by others on site, not by the supplier. |
| Freight and handover | Packing, container loading, freight mode, import documentation and who receives the goods at destination. |
Electrical requirements are the block most often left open. A 6.55 kW unit is not a plug-and-load decision for the site electrician, and adding a heat pump or an extra water pump changes the calculation again. Ask your supplier to confirm the power figure and supply requirement for the exact configuration you are buying, in writing, before the electrical contractor prices their work.
Where a Multi-Product Package Actually Saves Money
A single swim spa shipped on its own pays for a partly filled container and a separate set of paperwork. Put it into a package with the rest of the outdoor area and those costs spread across everything else. In practice we see three levers:
- One shipment, one customs file. Combining the spa with poolside dining and sun lounger sets, loungers and shade structures means one container plan, one packing list and one set of import documents instead of several.
- One specification cycle. Finishes, fabrics and metal colours for the poolside furniture can be aligned with the spa surround, pergola and paving at drawing stage, which removes variations later.
- One coordination channel. Design consultation, material selection, production scheduling, logistics and site coordination run through a single point of contact under turnkey villa furnishing, rather than across four unrelated vendors.
The saving is rarely in the unit price. It is in fewer shipments, fewer variations and one set of decisions instead of three.
Stay Inside the 7 m Class, or Step Up Deliberately
Site length is usually the deciding constraint. The catalogue puts WS-PC07ST at 7000 × 2400 × 1470 mm; the long variant Outdoor Swim Spa WS-PC07ST-L runs to 7490 mm in length with the same width and depth, which is a real problem if your terrace or plant room has a hard limit at seven metres. If you want the swim lane but also want an automatic cover in the specification, Outdoor Swim Spa WS-PC07ST-S is listed at the 7000 mm length with that option shown.
If the brief shifts from lap swimming to hydrotherapy volume, look sideways rather than longer. Outdoor Swim Spa WS-PC07A is catalogued at 7000 × 3000 × 1470 mm — same length, wider shell, and a very different jet and pump configuration with a higher total power figure. It is the better fit when guests use the spa for soaking rather than training, but it also means a wider footprint, more excavation or a larger plinth, and a heavier electrical demand.
A Simple Sequencing Rule
Order the decisions by how expensive they are to change. Model selection and siting come first, because they set slab size, drainage and access. Power and controls come second, because the electrician prices from them. Furniture, lounger and shade schedules come third — they can be adjusted late without touching civil works. Reversing that order is how projects end up with a seven-metre spa on a six-metre deck and a change order to pay for it.
If you are assembling a swim spa together with poolside furniture, shade structures or other fit-out products, send us the drawing set and the product list. We will price the blocks above as one package, flag what your site team needs to provide, and confirm every specification against the final configuration before production starts.
Specifications quoted here are transcribed from our product catalogue and are subject to confirmation for the configuration you select. Contact our project team with your drawings and quantities for a written quotation: SANTERSON — phone / WhatsApp +86-13928214007, email santerson@qq.com.