A swim spa is one of the easiest wellness features to add to a hotel or villa site, because it does not require the excavation, plant room or pool perimeter that a full swimming pool demands. Outdoor Swim Spa WS-S08B is a long, narrow hydrotherapy unit in our swimming pool range, and this article explains where it actually fits on a project, what has to be settled before it is ordered, and how it is procured alongside the rest of the package.
What the WS-S08B configuration includes
WS-S08B is listed in our catalogue at 7800 × 2200 × 1500 mm, which makes it a linear unit rather than a square spa. That footprint is the reason it works on narrow sites: it can sit along a boundary wall, on a terrace edge, or beside an existing pool deck without taking over the outdoor area.
The specification recorded for this model covers water jets, LED lighting, ozone sanitisation and a waterfall feature. The catalogue shows two control systems, four water pumps, one filter pump, 98 jets in total, seven LED lights with 46 small LEDs, and a total power figure of 14.6 kW. Optional items listed for the range include additional control systems, UV sterilisation, extra water pumps, heat pumps, sand filtration, insulation and steps.
Two points to keep in mind when you read those numbers. First, this model does not have a swim training system recorded in the captured specification, so if a guest-facing "swim against a current" experience is part of your concept, we confirm that separately rather than assume it. Second, the 14.6 kW figure is the catalogue total for the standard configuration; electrical loading depends on which options you select, so the final configuration must be confirmed with our engineering team before your M&E consultant sizes the supply.
Hotel applications
Boutique and limited-service hotels. A full pool needs planning consent, a large deck, lifeguarding rules in many jurisdictions, and continuous chemical and filtration management. A 7.8 m unit on a rear terrace, rooftop podium or garden lawn gives wellness positioning without that overhead. It suits properties where the pool would be an unnecessary cost but a spa experience supports the room rate.
Resort and leisure extensions. Where a resort already has a main pool, WS-S08B works as a paid or members-only hydrotherapy add-on: jets for muscle recovery after sport, a waterfall for ambient sound, LED lighting for evening use. Because the unit is factory-built, it can be installed in a phase that runs separately from the main building programme.
Gym, spa and wellness annexes. The linear form fits a long courtyard or a strip of outdoor space between buildings, which is common when an existing hotel adds a wellness annexe rather than rebuilding.
Villa applications
Narrow-site villas. On infill sites and terrace-style villas the outdoor area is often 3–4 m wide. A 2200 mm beam leaves room for circulation and planting, which a conventional pool does not.
Year-round family use. With a heat pump and insulation specified as options, the unit can be held at bathing temperature outside the swimming season, so it is used for exercise and hydrotherapy rather than only in summer.
Villa wellness corners. Paired with an outdoor lounge, pergola or cabana daybed from our outdoor furniture range, the spa becomes a defined treatment zone in the garden instead of an isolated tank on the lawn.
What must be resolved before you order
- Structure and access. Confirm the slab or deck can carry a filled unit, and confirm the delivery route — a 7.8 m shell needs crane or forklift access to the position.
- Power. Size the supply against the selected configuration, not the catalogue figure alone. Heat pump and extra pumps change loading materially.
- Drainage and plant arrangements. Agree overflow, drainage and filter-pump access with your civil contractor at drawing stage.
- Options list. Ozone is listed on this model; UV sterilisation, sand filtration, steps and insulation are options to be confirmed for the chosen configuration.
How it fits a one-stop project package
We are a China-based manufacturer and one-stop supplier of furniture and building materials, operating since 2008, and we supply swim spas as part of the same programme as cabinetry, ceramics, lighting, flooring, wall panels and outdoor furniture. That matters operationally: the spa, the poolside loungers, the changing-room joinery and the wet-area finishes come from one production and shipping plan instead of six separate vendors with six different lead times.
Our turnkey solutions cover consultation, design and planning, production, logistics, installation and after-sales. For an Australian villa or hotel project, we coordinate drawings, production coordination and on-site guidance through the same team, and freight is arranged door to door by sea, air or rail with the customs paperwork handled on our side.
If you are evaluating this model for a specific site, send us the layout drawing and the target configuration. We will confirm dimensions, options, electrical loading and shipping method against your drawings before production starts.