Stone and marble in a bathroom fit-out is rarely one purchase. It is a set of decisions that repeats across every room type on the drawings, and each decision changes what the factory can produce, how the sheets travel, and what the site crew needs before the panels arrive. If you are comparing Santerson Stone & Marble Surfaces for a villa, apartment or hospitality project, the useful comparison is not "which slab looks best" but which set of specifications you can actually hold the supplier to. The checklist below follows the order in which those decisions have to be made.
Start with the scope: surfaces and panels are different line items
On a typical project the stone budget is split across at least two very different product families. Countertops and basins sit in the sanitary-fixtures zone: they carry basin cut-outs, tapware holes, overhang dimensions and an edge profile, and they have to coordinate with vanities, mirror cabinets and wall finishes around them. Wall cladding panels carry none of that, but they bring their own questions about substrate, fixing method, joint layout and how corners and reveals are handled.
SANTERSON lists these as separate collections for a reason. Stone & Marble Surfaces sits in the Countertops & Basins range, while Stone & Marble Panels sits in Paneling Systems, and a third entry, Stone & Marble Panels under Custom Partitions & Paneling, covers cladding that is designed together with partitions and built-in joinery. Comparing a price per square metre across the three is meaningless unless you are comparing the same scope: fabricated tops with cut-outs against flat panels against a full wall build-up.
Compare how far the "made-to-measure" claim actually goes
Every one of these product pages lists made-to-measure sizing, material and finish options, and a layout tailored to the project. That is the right starting point for procurement, but it is also where most disputes begin, because "made-to-measure" can mean anything from cutting a standard slab to full fabrication from your own shop drawings.
Before you compare quotations, pin down four things in writing:
- Who produces the dimensional drawings. If you supply them, confirm the units and whether openings, falls and service clearances are included. If the factory produces them from your architectural set, ask what happens when a site dimension moves after production starts.
- What the tolerance window is for the finished piece, especially where stone meets tiling, joinery or glass.
- Which edge and finish options are standard and which carry a tooling or setup cost.
- What is confirmed before production releases — usually basin spacing and countertop fit for tops, and dimensions and selected specifications for panels. The product pages themselves ask buyers to confirm these per project, so treat that as the sign-off gate.
A supplier that answers those four questions cleanly is usually easier to work with than one quoting a lower price per square metre.
Compare material families against the room, not against the render
The catalogue spans natural stone and marble alongside engineered and alternative surfaces, and the practical difference between them shows up in daily maintenance rather than in photographs. A useful way to read the range:
| Surface family | Where it earns its place | What to verify before ordering |
|---|---|---|
| Natural marble for vanity tops and feature surfaces | Guest bathrooms, master ensuites, reception and feature walls where veining is the design statement | Sealing regime, etching behaviour with cosmetics and cleaning products, slab batch matching across rooms |
| Engineered stone and laminates from the custom/OEM programme | High-use guest bathrooms, serviced apartments and shared amenities where consistency matters more than unique veining | Colour batch consistency across production runs, edge banding method, board substrate used behind the visible surface |
| Sintered stone table tops in the outdoor collections | Terrace and poolside dining where the surface is exposed and cleaned daily — see the wicker dining sets with sintered stone tops | Fixing detail to the frame, exposure conditions, and whether the top is supplied loose or pre-fitted |
| Flexible stone veneer for wall cladding | Curved walls and feature surfaces where heavy natural stone slabs are impractical — see MCM flexible travertine stone veneer | Adhesive and substrate system, joint treatment, and the fixing method your local crew will use |
Performance statements on product pages — weather resistance, stain resistance, ease of cleaning — are descriptions of the intended use, not test results. If your project has a wet-area or exterior exposure requirement, ask for the specification that supports it rather than repeating the marketing wording in your submittal.
Compare coordination cost, not just unit price
Stone is where a fragmented supply chain becomes expensive. When the vanity units arrive from one vendor and the tops from another, the gap between them — basin spacing, cut-out positions, splashback returns, sealant lines — gets resolved on site at your cost.
This is the practical argument for sourcing stone together with the fixtures around it. Santerson's integrated countertop vanities and double basin countertops are configurable as a set, so the countertop, the basin positions and the cabinet carcass come off one drawing set and ship on one schedule. The same logic applies across the fit-out: wall panels ordered alongside joinery, lighting and flooring from the same furniture and building materials supplier means one coordination point for dimensions, finishes and delivery sequencing.
When you compare two quotations, put the coordination load on the page: how many drawing sets, how many sample approvals, how many shipping notifications, and how many parties you have to chase when one dimension changes late.
Compare packaging, sequencing and site readiness
Stone failures in transit are expensive in a way that has nothing to do with the unit price: a damaged top stops the vanity, the mirror cabinet, the tapware installation and sometimes the handover date. So compare the logistics detail as part of the product.
- Ask how stone pieces are crated and blocked, and whether tops travel flat or upright in your freight mode. The logistics and door-to-door delivery service covers sea, air and rail forwarding, packaging and container loading, customs paperwork and shipment tracking — ask which of those are included in your quotation and which you arrange yourself.
- Agree the delivery sequence against site readiness. Stone should arrive after the substrate, services and adjoining joinery frames are set, not with the rest of the loose furniture.
- Confirm who inspects on arrival and what photographic record you need before unpacking, so a replacement claim is documented.
Compare the approval path before you compare prices
A realistic stone procurement has three approvals, and the number of weeks each takes is what actually drives your programme:
- Material approval. Physical samples or slab images with the batch reference, plus the finish and edge profile you expect.
- Dimensional approval. Shop drawings signed off by the designer, the M&E consultant where cut-outs are involved, and the site contractor.
- Release for production. A single named person confirming both of the above, with a date recorded.
SANTERSON's stated workflow — design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then installation and handover — maps onto that path, and the custom and OEM service covers bespoke finishes and material choices where your design calls for something outside the standard range. Ask at quotation stage who signs each approval and how long a revision cycle takes, because that answer is worth more than a small unit-price difference.
A short pre-order checklist
- Room-by-room schedule of every stone item, with the product family and collection it belongs to.
- Material, colour, finish and edge profile named for each item, with batch references.
- Dimensional drawings issued or received, with units, tolerances and cut-out positions marked.
- Confirmation of basin spacing and countertop fit for tops; dimensions and selected specifications for panels.
- Crating method, freight mode, delivery sequence and inspection-on-arrival procedure agreed in writing.
- Named approver and revision-cycle time recorded for each of the three approval stages.