A quotation for open plan kitchen cabinetry is where a project either becomes buildable or quietly falls apart later. Cabinetry sits at the centre of an open-plan interior: it meets the flooring, the wall finishes, the lighting, the appliances and the joiner's site work all at once. Two quotes for what looks like the same run of cabinets can differ by a wide margin once you compare what each one actually includes — and the cheaper figure is rarely the cheaper outcome after variations.

Before you sign, check that the quote covers measurement responsibility, a drawing set you can hand to other trades, appliance interfaces, hardware schedules, finish definitions, packaging and delivery terms, and the site coordination that open-plan work demands. The rest of this article walks through each item in the order a procurement or fit-out buyer normally reviews it.

Start with scope: cabinetry only, or interior fixtures as a package

The first line to read is not the price — it is what the supplier is responsible for. A cabinetry quote that stops at the boxes leaves you to source and coordinate the worktop, splashback, integrated appliances, task lighting and any panelling that butts into the cabinets. In open-plan layouts those elements are visually continuous with the cabinetry, so splitting them across suppliers multiplies the interfaces someone has to resolve on site.

Where a supplier also produces interior fixtures, ask for the scope in named groups rather than one lump sum. That way you can compare like for like against other bids and still keep the package under one production line. For project buyers working across several apartments or suites, this grouping is what makes a repeatable specification possible from one unit to the next.

Read the drawings before you read the numbers

A quote without dimensioned elevations and a plan is not comparable to any other quote. Ask for the drawing set that will be issued with the order, and confirm it includes:

  • elevations of every wall of cabinets, with overall and carcass heights marked;
  • plan views showing run lengths, island dimensions and clearance to adjacent seating or circulation routes;
  • section details at the worktop edge, at the splashback junction and where tall units meet a ceiling or soffit;
  • appliance locations with cut-out sizes, ventilation route and the electrical outlet position behind each unit;
  • internal layout per unit — shelf positions, drawer stack, pull-out corner mechanisms and pantry divisions.

If your own designer issued the layout, ask the supplier to return their own marked-up version rather than simply stamping yours. A manufacturer that redraws from the carcass outward is telling you how it actually builds; a supplier that stamps your drawing is transferring every interface risk back to you.

Check how measurement and site verification are handled

Open-plan kitchens rarely have square walls or identical floor levels, and a quote built on architectural drawings alone carries that tolerance into production. Confirm in writing who measures the openings, at what stage — after plasterboard, after screed, before flooring — and who pays for rework if a site dimension moves after the order is released.

For projects delivered from an overseas factory, this clause matters more than it does with a local joiner, because there is no quick return to site. Ask whether the supplier requires a site survey by their own team or accepts verified dimensions issued by your contractor, and what tolerance they expect on floor level and wall alignment.

Compare hardware schedules line by line

Hardware is the most common place where two quotes for the same cabinet look identical and are not. Ask each supplier to list, per unit type: hinge brand and closing action, drawer slide type and load rating, whether soft-close is fitted to doors as well as drawers, and what mechanism is used for corner and tall storage. Handleless designs need a stated opening method — profile pull or touch-to-open — because the two behave differently once in daily use.

Where the design calls for a clean, handle-free frontage, request the specification of that system specifically and ask whether the same hardware is used across base units, wall units and tall pantry runs. Our handleless minimalist kitchen cabinets are quoted with soft-close fittings on the opening elements and a stated touch-to-open arrangement, so the schedule can be checked against yours item by item.

Also confirm what happens after handover: which parts are stocked as spares, how a replacement slide or hinge is ordered, and the cost of that spare. A cabinet line specified for a dozen hotel suites will be replaced part by part long before it is replaced as a whole.

Demand finish definitions, not finish names

"Matte grey" means nothing on its own. Ask for the substrate, the surface material, the application method and a physical sample reference for every panel colour in the quote. For wood-grain panels, ask whether the decorative layer is laminate, veneer or lacquer over a painted door — each ages differently at edges and around handles.

Then check the performance wording against the room's actual use. Surfaces described as wear-resistant, waterproof and easy to clean should be supported by what the supplier will do when a panel is damaged in a suite or a rental kitchen: patch, replace the door, or replace the unit.

Two examples from our own catalogue show how the same request resolves into different build-ups. A wood and taupe handleless kitchen combines a wood-grain panel with a matte neutral flat door, and the quote states both surface treatments separately. A wabi-sabi rattan kitchen with island specifies a solid wood frame with woven rattan infill panels — an open weave that needs its own cleaning and handling notes on site.

Verify the interfaces: worktop, splashback, appliances, lighting

In an open-plan kitchen the cabinetry is a support structure for everything else. Check each interface in the quote individually:

  • Worktop. Is the top included, and who supplies it? If stone or engineered surfaces come from a different vendor, confirm who takes the template, who cuts the sink and hob openings, and who is responsible for the join line where the worktop meets the splashback. Where surfaces are supplied with the fit-out, ask for made-to-measure sizing rather than standard slab dimensions.
  • Splashback and wall panels. A stone or marble backsplash that runs up into an open shelf bay needs a stated thickness and edge detail; otherwise the cabinet quote and the panel quote will not meet cleanly.
  • Integrated appliances. Tall units built around ovens, refrigerators or a wine cabinet must be quoted against appliance models you have actually selected. If the model is not fixed at quotation stage, ask for the cut-out range the supplier will build to and who confirms ventilation clearances.
  • Integrated lighting. LED-lit glass display cabinets and shelf strips need a stated driver location, a switching arrangement and an accessible route for replacement. Glass-fronted display units look simple on a drawing and are the first thing a maintenance team struggles with after handover.

A grey modern kitchen with an LED glass wine cabinet is a useful test case: ask for the lighting specification, the driver position and the shelf layout in the same document as the carcass schedule.

Check storage logic against the actual room

Open-plan layouts trade wall length for island space, so usable storage usually shrinks even though the room feels larger. Compare the internal layout on the drawings with how the space will be used: where dry goods sit relative to the hob, whether corner sections use a pull-out mechanism rather than a fixed shelf, and how tall units are reached. If the quote lists cabinets by linear metre only, ask for the internal configuration per unit before you compare it with another bid.

Read the commercial terms as carefully as the specification

For cabinetry manufactured in China and delivered to site, these clauses decide whether a quoted price holds:

Term to checkWhat a clear quote states
Incoterms and named placeFOB, CIF or DDP with the exact delivery address, not "to port"
Packing specificationCrate type, panel protection, unit-by-unit labelling keyed to the drawing numbers
Container loading planHow many crates per container and what changes if units are split across shipments
Customs documentsCommercial invoice, packing list, certificate of origin — and who prepares import permits
Payment stagesDeposit, balance point tied to drawing approval or pre-shipment inspection, in currency
Production lead timeStart date measured from drawing sign-off and deposit, not from enquiry
Change-order pricingWhat a post-approval dimension change costs and the cut-off for amending an order
Inspection rightsWhether pre-shipment inspection is offered, and what the report covers
Warranty and sparesDuration, what is excluded, how replacement hardware reaches site

Ask one blunt question: does the quoted price include delivery to the apartment door or villa plot, or does it stop at the port? Freight, duties and last-mile handling are where an apparently competitive cabinetry price is won back.

Look for what is missing rather than what is wrong

The expensive gaps in a cabinetry quote are usually omissions you only notice at installation: plinth and scribe pieces against uneven walls, panels that close a visual gap to adjacent wardrobes or wall panelling, the fillers around an integrated refrigerator, trim where a tall unit meets a tiled surface, and the protection needed for installed cabinets while other trades finish the room. Ask each bidder to state explicitly which of these are included and which are site-supplied.

Where the open-plan kitchen visually continues into living or dining joinery — media walls, sideboards, pantry runs in matching panels — request those items on the same drawing revision. Matching a veneer or lacquer across two production batches from two suppliers is the kind of problem that never appears on a quotation.

A pre-award checklist for open-plan cabinetry quotes

Confirm before signing
  • Dimensioned elevations, plans and sections attached to the priced document
  • Named party responsible for site measurement and for dimensions after order release
  • Hardware schedule by unit type, with soft-close and opening method stated
  • Physical sample reference for every panel colour and surface treatment
  • Appliance models fixed, with cut-outs, ventilation and outlet positions drawn
  • Integrated lighting specification including driver location and access for replacement
  • Worktop and splashback responsibility, templating and edge details agreed in writing
  • Packing, labelling keyed to drawing numbers, container plan and Incoterms with named place
  • Lead time measured from drawing approval; change-order cut-off and pricing stated
  • Warranty scope plus spares availability for hardware and panels

Send the same drawing set to every bidder and require the schedule format above. You will find that the spread in price narrows once everyone is quoting the same scope — and where it does not, the difference will be visible as an item one supplier included and another left out.

Frequently asked questions

What documents should a cabinetry quotation include?Dimensioned elevations and plans, an internal layout per unit, a hardware schedule, finish samples with references, appliance interface drawings, lighting specification, packing and delivery terms, and a stated lead time measured from drawing approval.

Why is open-plan cabinetry harder to quote than a closed kitchen?Fewer walls mean fewer straight runs and more island units, plus visible junctions with flooring, panelling and living-area joinery. Tolerances that would have been hidden behind a door now show at an open end panel.

Should the worktop be quoted by the cabinet supplier?Ideally yes, or the interface must be split in writing: who templates, who cuts sink and hob openings, and who owns the join at the splashback. A missing line here is a variation order later.

How do I compare quotes from different factories?Normalise them. Same drawings, same hardware list, same finish references, same Incoterms and delivery point. Compare unit by unit rather than the bottom line.

Send us your layout for a scoped quotation SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials, supplying custom built-in kitchen cabinets and interior fixtures for hotel suites, serviced apartments, villas and residential renovation projects. Send floor plans, appliance selections and finish references and we will return dimensioned drawings with an itemised schedule covering carcass, hardware, finishes, integrated lighting, packing and door-to-door delivery terms — so you can compare it line by line against any other bid.