A buyer who has already picked the Aluminum Frame with Solid Panel and now wants it produced under their own brand usually asks the same three questions: what exactly do I send, what does the factory send back, and where do the decisions have to be locked down before metal is cut. This article walks through that sequence step by step, using our aluminium frame kitchen cabinet line as the working example.
What "OEM" means for this product family
In cabinet work, OEM is not one service but two different arrangements that are easy to confuse. The first is contract manufacturing: you supply the drawings and the bill of materials, and the factory builds to your document set. The second is private labelling: you select from an existing collection, and the factory adapts finishes, hardware and branding so the units carry your name on site.
Both are supported for our aluminium frame kitchens. The Custom & OEM Service page covers custom furniture design and prototyping, bespoke material finishes and textures, OEM manufacturing, flexible minimum order quantities and brand customisation such as engraving, embossing, logos and packaging. The practical difference for a buyer is who owns the drawing. If you own it, you are doing contract manufacturing. If we own the base design and you change its surface and marking, you are doing private labelling. Everything below applies to both.
Stage 1 — The brief you send
The enquiry does not need to be a finished specification, but it needs enough to price the job. For an aluminium frame cabinet run we normally ask for:
- Room dimensions and a layout sketch or architectural drawing, with appliance positions marked.
- The panel type you want: solid panel fronts, glass fronts, or a mix across the run.
- Frame colour and finish, plus the core material of the solid panel if you have a preference.
- Target quantities — number of kitchens, not just cabinet metres — so the minimum order can be assessed.
- Your brand marks: logo files, preferred label position, packaging requirements if units ship to your warehouse.
- Destination port or site address, which determines how the load is broken into containers.
If you do not have drawings yet, that is a normal starting point. Our Interior Design Services team handles space layout planning, concept design and mood boards, furniture layouts with 3D visual renderings, and project design coordination including drawings, production coordination and on-site guidance.
Stage 2 — What comes back from the factory
Once the brief is in, you should receive a quotation broken down by unit type, with the frame profile, panel material and hardware listed for each. At this stage the open items are usually finishes and internal fittings rather than structure. Ask for the following in writing before you commit:
| Item | Why it matters at quotation stage |
|---|---|
| Frame profile and colour sample | Anodised, powder-coated and wood-effect frames photograph alike but feel and cost differently on site. |
| Solid panel core and surface | The same frame can carry different panel cores; the choice drives weight, fixings and price. |
| Hardware schedule | Hinges, runners and handles are the parts most often substituted after order confirmation. |
| Minimum order quantity | OEM runs are priced on volume; confirm what one kitchen set costs before scaling up. |
| Branding method | Engraved, embossed and applied labels each have different lead times and tooling costs. |
| Packing and loading plan | Determined by destination; it affects damage risk more than most buyers expect. |
Product marketing copy on a catalogue page will not answer these. Each product record in the aluminium frame collection states made-to-measure sizing, material and finish options, and a layout tailored to the project, with an explicit instruction to confirm dimensions and selected specifications for each project. Treat that line as what it is: the specification is yours to set.
Stage 3 — Prototyping and sample approval
For a repeat or branded run, request a prototype before full production. The Custom & OEM page describes 3D modelling and prototyping as part of the service, along with material choices such as wood, metals, engineered stone and laminates. A prototype confirms three things that drawings never settle: how the frame edge reads at close range, whether the solid panel front sits flush with the adjacent glass-front unit, and how your logo actually looks at the size you chose.
If the same project also uses Glass Front Aluminum Frame Cabinets, order both doors in one sample set. Frames from two production batches can differ subtly, and mixed runs are where that becomes visible.
Stage 4 — Production and quality control
After sample sign-off, the order moves into manufacturing with quality control checkpoints. As an OEM buyer you should agree in advance which checkpoints you receive reports from, and what a rejected unit is replaced with. If your brand requires specific packaging or carton marking, that has to be fixed before packing begins — it cannot be applied retrospectively.
Factory size, headcount and export share are quoted differently across our own pages, so if your tender documents need those figures, request them in writing with a date on the quotation rather than copying them from a web page. The same applies to any figure you intend to reprint in your own marketing.
Stage 5 — Freight, delivery and after the container lands
The Logistics & Door-to-Door Delivery service covers global freight forwarding by sea, air and rail, customs paperwork including commercial invoices, packing lists, certificates of origin and import permits, packaging and container loading, shipment tracking and door-to-door delivery. Import terms, duties, Incoterms, insurance and transit time are settled case by case — none of them should be assumed from a brochure.
On arrival, the Installation & After-sales Support page lists on-site installation, inspection and snag resolution, warranty coverage, spare parts and replacement, and ongoing maintenance. The response-time figures shown there are site claims rather than independently verified service levels, so have the applicable terms stated in your order confirmation.
Where OEM sourcing goes wrong on cabinet projects
- Specifying by name only. Two collections can share a description while differing in frame profile. Always reference the product page and confirm the drawing number.
- Mixing panel types across one run without a sample. Solid and glass fronts on the same frame need to be checked together, not separately.
- Leaving branding to the end. Logo tooling has its own lead time and belongs in the production schedule.
- Assuming quantities. Flexible minimum order quantities exist, but pricing tiers are set per volume band; ask for both bands before you commit.
Related products in the same collection
Buyers comparing frame styles typically shortlist from the same family: Minimalist Black Aluminum Frame Cabinets for dark, low-contrast kitchens, and Two Tone Aluminum Frame Cabinets where the frame and panel are deliberately contrasted. For whole-apartment or hotel fit-outs, Custom Built-in Kitchen Cabinets covers the interior fixtures scope alongside the rest of the package.