A swim spa rarely decides a project on its own. What usually decides it is whether the spa can be delivered, positioned and commissioned inside the same package as everything else — decking, paving, loungers, shade structures, bathrooms, lighting and joinery. The Outdoor Swim Spa WS-PC07ST-S is a useful example of how one item in a long product list can be handled as part of a single coordinated fit-out, rather than as a separate purchase from a separate supplier.
Where this model sits in the range
The WS-PC07ST-S is one configuration in our configurable outdoor swim and hydrotherapy range, alongside the standard WS-PC07ST and the longer WS-PC07ST-L. The catalogue lists this model at 7000 × 2400 × 1470 mm, with a control system, a swim training system, one filter pump, six jets and four LED lights, and an automatic cover listed as an option. Total power for the configuration shown on the product page is 6.55 kW.
Those figures matter to a project team for two reasons. First, the footprint — roughly seven metres long and under two and a half metres wide — is narrow enough to run along a side boundary, a terrace edge or a courtyard wall where a full swimming pool would not fit, while still being long enough for counter-current swimming. Second, the listed power figure gives the electrical engineer something concrete to design around. Because optional equipment such as heat pumps, water pumps, UV sterilisation, sand filtration, insulation and steps changes both the equipment set and the power draw, we confirm the complete specification with the client before production rather than assuming a default build.
Why buyers group the spa with the rest of the package
Villa and resort projects usually buy from many categories at once: outdoor furniture for the pool deck and garden, paving and wall finishes, bathroom fixtures, lighting, kitchen cabinetry and built-in storage. When a swim spa is bought separately, the coordination burden falls on the client: two drawings sets, two delivery windows, two installation crews, and — most often — an argument about who is responsible for the plinth, the drainage, the power feed and the control location.
Grouping it with the rest of the order changes that picture. As a one-stop furniture and building materials supplier, we hold one product schedule for the whole area, so the spa shell, the surrounding paving, the sun loungers, the pergola or gazebo and the changing-room fit-out are dimensioned against each other before anything is manufactured. The same reference drawings that fix the spa position also fix the seating layout behind it and the walkway beside it.
The coordination sequence we work to
For a project that includes a swim spa, the practical steps run in this order:
- Set the position before anything else. The spa footprint, access for delivery and the location of plant and controls determine the paving setting-out, so this decision cannot wait until finishes are chosen.
- Confirm the equipment list in writing. Jets, filtration, lighting and control system appear on the product page; heating, insulation, steps and cover options are confirmed against the selected configuration so the quotation matches what will actually be shipped.
- Hand the electrical and structural requirements to the site team early. The listed total power, the supply arrangement and the supporting base are site-side works. We state what we need; the client's contractor builds to it.
- Match the surrounding products to the same finish palette. Frames, teak-look tops, lounger slings, wall panels and lighting are specified together, so the spa area reads as one design instead of several purchases.
- Ship on one schedule and install in sequence. Through our logistics and door-to-door delivery service, the spa and the rest of the package move under coordinated documentation, then installation and after-sales support covers commissioning alongside the other products.
What we need from the client to price it properly
A swim spa enquiry becomes a usable quotation once four things are known: the intended location and how the unit reaches it; whether the spa is indoor, outdoor or covered; the selected options, including heating and cover; and the adjacent products that share the same area. With those answers we can produce a specification sheet, a dimensioned layout and an itemised package price rather than a single number for one box.
If the site cannot take a seven-metre length, the range also covers shorter shells in the same family — the WS-PC05ST-S at 5000 × 2400 × 1470 mm and the WS-PC06ST at 5900 × 2400 × 1470 mm are both listed with a swim training system — as well as longer ones such as the 7490 mm WS-PC07ST-L. Compare them in the swim spa collection, or send us the plan drawing and we will tell you which models fit the space and what the site works require.
Send us the plan drawing, the site photographs and the list of products you are already sourcing. We will return a configuration for the spa, the site requirements it depends on, and a package quotation that covers the surrounding furniture and finishes in one document.