A swim spa can be the amenity that decides whether a boutique hotel guest stays one night or three, and whether a villa buyer sees an outdoor lifestyle or just another pool. The catch is that swim spas are not off-the-shelf items on a project schedule: they combine structure, water treatment, mechanical plant and electrical work, and the model you specify has to match the site it lands on. This guide walks through how we approach specifying the Outdoor Swim Spa WS-130Cⅱ for hospitality and villa projects, and what your design and site teams should confirm before an order is placed.

Why project buyers choose a swim spa over a pool

A conventional swimming pool needs a large excavation, a plant room, and open-season water to be useful. A swim spa is a self-contained shell with its own pumps, filtration and heating, so it works on a rooftop terrace, a courtyard, a resort garden edge or a villa backyard where a full pool would be impractical. The long, narrow tank plus a swim training system also gives guests something a small plunge pool cannot: a place to swim laps in the morning and soak under massage jets in the evening, year-round.

For hotel operators this matters commercially. An outdoor spa that stays open through shoulder seasons supports room rates, wellness packages and repeat bookings without the footprint of a full aquatics facility. For villa developers it is a visible differentiator at show-home stage, because the swim, hydrotherapy and lighting features are immediately legible to a buyer walking the site.

Reading the WS-130Cⅱ specification sheet

The WS-130Cⅱ sits in our configurable outdoor swim and hydrotherapy range. The catalog figures below are the starting point for a project quotation; final equipment and electrical details depend on the configuration your project selects.

ModelWS-130Cⅱ
Catalog dimensions11830 × 3000 × 1430 mm
Control system1 set
Swim training system1 set
Water pump1 pc
Filter pump1 pc
Jet total20 pcs
LED lights7 pcs
Total power (catalog)10.85 kW
Features shownWater jets, LED lighting, Ozone, Swim training system

What the numbers mean on site: an internal length in the 130 series gives a genuine lap-swim zone, so guests can use the spa for training rather than paddling. The swim training system is what makes that possible without a 25 m pool hall. Twenty jets place the hydrotherapy side firmly in spa territory, which is what wellness-focused hotels typically want alongside the swim function. Ozone is included in the shown features as part of water treatment, reducing the chemical load staff manage day to day.

The -U variant, WS-130Cⅱ-U, shares the same 11830 × 3000 × 1430 mm shell but is configured differently: four water pumps, 23 jets and a catalog total power of 11.85 kW, with water jets, LED lighting and ozone as the shown features. In practice we suggest hotels and villas compare the two variants against how guests will actually use the spa — more swim-focused, or more jet-and-soak focused — because the jet count and pump arrangement drive both the guest experience and the plant you need around the shell.

Five site questions to settle before you specify

  • Structural support and access. A shell of this size arrives as a large unit. Confirm crane or forklift access, the route from the delivery point to the final position, and — for rooftops and terraces — that the slab and its engineer sign off on both the filled weight and the empty weight.
  • Electrical supply. The catalog total power is a reference for the equipment as listed. Your electrical contractor should size the supply, protection and dedicated circuits from the confirmed configuration, not from the brochure figure.
  • Heating and insulation for the climate. Heat pumps and insulation appear in our catalog options list. A resort in a cool-winter region and a villa in a warm climate will specify these very differently, and the choice changes running cost more than almost any other option.
  • Water treatment scope. Ozone is shown on this model; UV sterilization and sand filtration are catalog options. Agree with your operator what the daily maintenance routine will be before the spa is switched on, not after.
  • Surrounding deck and steps. Steps are a listed option, and the deck detail around the shell decides whether the finished installation reads as built-in or dropped-in. Coordinate the coping level with your landscape or civil drawings early.

Options that change the quotation

Catalog-listed options for this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so treat each option as a line to confirm rather than an assumption. Two that project buyers most often revisit after the first quotation are heat pumps — because they determine whether the spa is usable in winter — and insulation, which pairs with the heat pump to control energy consumption over a full year of hotel operation.

How the swim spa fits into a one-stop project package

Specifying a spa alongside outdoor lounge seating, poolside daybeds and lighting as one package keeps finishes, delivery windows and site coordination under a single scope. As a one-stop furniture and building materials supplier, SANTERSON handles the same project from design consultation and material selection through manufacturing, door-to-door logistics and installation support — so the spa, the poolside furniture around it and the wider villa or hotel fit-out move on one schedule instead of several. Browse the full Swimming Pools and Swim Spas category to see how the 130 series sits next to shorter swim spa models when space is tighter.

Before you send an enquiry, have three things ready: the site drawing or photo of the intended location with clear dimensions, your local power supply details, and whether the priority for your guests is lap swimming or hydrotherapy. With those, we can recommend between the WS-130Cⅱ and its -U variant and quote the exact configuration rather than a generic price.