Two tone aluminium frame cabinets sit at the awkward middle of a kitchen package. They are not a flat-pack item you order off a shelf, and they are not a bespoke commission that needs a design studio either. What they do need is a supplier who can hold two finishes, one frame profile and one set of dimensions together across every carcass in the run. That is where OEM sourcing earns its keep — and where most of the cost surprises hide if you brief it badly.

This guide walks through how OEM sourcing actually runs for this cabinet type: what you specify, what the factory returns, which decisions are yours to make, and where a custom & OEM service changes the commercial picture compared with buying standard sizes.

What "OEM" means when you are buying cabinetry

In cabinetry, OEM is a manufacturing arrangement, not a design service. You supply the specification — dimensions, door style, frame profile, board material, finish, hardware, and how the units are to be packed — and the factory builds to your drawing under your brand or your project name. Your drawings stay your intellectual property; the factory's job is repeatability.

That distinction matters when you compare quotes. A supplier quoting "OEM price" may mean anything from a cut-to-size service on an existing carcass to a full tooling and prototyping programme. Before comparing numbers, confirm which of these three levels you are actually being quoted:

  • Cut-to-size. Existing door and frame profiles, existing carcass construction, your dimensions only. Fastest and cheapest to change.
  • Specification build. Your dimensions plus your choice of board substrate, finish system, glass type and hardware from the supplier's option list. This is what most aluminium frame kitchen work sits at.
  • Bespoke tooling. A new frame extrusion profile or a door panel that does not exist in the supplier's range. Requires prototyping and changes both lead time and minimum order quantity.

What you specify on a two tone aluminium frame cabinet

"Two tone" is a finish decision, not a construction type. The frame and the door panel are finished in two different colours or textures — commonly a timber-effect frame against a solid matte door, or a dark frame against a light door. Because those two surfaces come from different processes, they need to be specified separately. A single line item saying "two tone grey oak" is not enough for a factory to reproduce consistently across a batch.

The specification sheet you send should cover six items:

ElementWhat to state on the drawing
Frame profileAluminium frame section, finish colour, and the visible face width. If the profile must match an existing order, ask for a physical sample rather than a colour code.
Door panel substrateWhat sits inside the frame — board-based panel, glass, or a combination. Glass type (frosted, smoked, clear, ribbed) and thickness are stated separately.
Finish system, per surfaceFrame finish and door finish listed as two separate line items, each with a physical reference sample number. Matte and high gloss behave differently under site lighting.
DimensionsMade-to-measure height, width and depth per unit, plus the floor finish level and any tolerance on the wall face. Site-measured dimensions should be marked as such.
Hardware and internalsHinges, slides, handles or handleless groove, shelf loads, integrated appliance cut-outs, and internal lighting if the units carry it.
Packing and labellingUnit numbering that matches your layout drawing, panel-level protection, and private labelling or branding if the units ship under your name.

Our Two Tone Aluminum Frame Cabinets are built to that model: made-to-measure sizing, a choice of material and finish, and a layout set out per project. The same applies across the aluminium frame range — Frosted Glass Aluminum Cabinets, Smoked Glass Aluminum Cabinets and Minimalist Black Aluminum Frame Cabinets share the frame family while differing in what fills the panel.

The OEM sequence, step by step

A cabinet OEM order runs through five gates. Each gate is a decision you make before money moves, and each one is cheaper to change at its own stage than after the next one has started.

  • Brief and layout. Room dimensions, appliance list, work triangle, storage priorities, and the number of units by type. Send what you have — a sketch with measurements is enough to start a costing conversation.
  • Design and specification. The supplier returns elevations, a unit schedule, and the option selections priced separately: frame finish, door finish, glass, hardware. This is where two tone combinations get resolved against physical samples.
  • Sample approval. One cabinet, or at minimum one door panel with its frame, built to the approved drawing. Check the two finishes side by side under the lighting conditions the kitchen will actually have.
  • Production and quality control. Batch build against the signed sample. Confirm what is inspected before packing — dimension check, finish check, hardware function test — and whether you get a pre-shipment report.
  • Packing, freight and handover. Container loading plan keyed to your unit numbering, shipping documents, delivery to site, then installation and snag list.

SANTERSON runs this as one chain rather than five separate contracts. The one-stop solution covers design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover. For a kitchen package that also needs worktops, basins, taps, lighting and flooring from the same order, that single point of accountability is the practical reason to consolidate rather than split the purchase across four vendors.

Cost drivers: where the money actually goes

Two tone aluminium frame cabinets are priced by unit or by linear metre, depending on how the supplier schedules the run. The variables that move the number are narrower than most buyers expect. Frame profile and glass selection carry more weight than overall size, because both are tooling- and handling-driven rather than material-volume-driven.

  • Glass in the panel. Frosted, smoked or ribbed glass with an aluminium surround costs more to produce and pack than a solid panel of the same size. Breakage allowance and crating change with it.
  • Finish count. Two finishes on one unit means two process runs. A project that mixes three frame-and-door pairings across one kitchen pays for all three setups.
  • Non-standard dimensions. Made-to-measure is the point of OEM, but a run where every unit is a unique size carries more setup than a run with three sizes repeated.
  • Hardware and internals. Integrated appliance housings, internal lighting and pull-out mechanisms are specified per unit and priced per unit.
  • Order quantity and mix. Minimum order quantities vary by product family and finish. Kitchen cabinetry is usually one project set rather than a repeated SKU run, so confirm the applicable minimum before you assume flexibility.
A useful cost discipline: keep the two tone pairing to a maximum of two combinations across the whole kitchen. One frame finish for wall units and one for base units gives the layered look without paying for a third setup.

Private labelling and repeat supply

For builders, joinery firms and interior contractors buying cabinets under their own name, OEM sourcing usually comes with branding on the packing and on the units. Engraving, embossing, logos and printed packaging are all within the custom service, and they matter commercially: a project delivered under your brand is a marketing asset as well as a completed job.

If you order repeatedly rather than once, hold a specification file with the supplier — approved frame profile, approved finish samples with reference numbers, standard unit sizes, hardware schedule. Repeats then quote against an existing baseline instead of restarting the design gate every time, and batch-to-batch colour drift becomes something you can actually police.

What to check before signing

  • A physical sample of both finishes on one corner, not two separate swatches.
  • A unit schedule where every item number matches your layout drawing exactly.
  • Written confirmation of the frame profile and glass specification you selected, with product references.
  • The inspection scope before packing, and who signs off on it.
  • Packing list format, so site can reconcile crates against the schedule without opening them.
  • Who handles installation, snagging and replacement parts after handover — see installation & after-sales support.

For freight, the order moves by sea, air or rail with customs paperwork handled as part of delivery — commercial invoice, packing list and certificate of origin — under logistics & door-to-door delivery. Import terms, duties and delivery scope are project-specific and should be confirmed in writing for your destination before you commit to an incoterm.

Bringing it together

OEM sourcing works well for two tone aluminium frame cabinets when the specification is explicit about the two finishes, the panel infill and the dimensions per unit, and when the supplier holds the whole chain from drawing to handover. Where those conditions are missing, buyers end up paying twice: once for the order and once for the corrections.

SANTERSON is a China-based furniture and building materials manufacturer operating since 2008, supplying custom cabinetry and interior fixtures for villa, hospitality and office projects. Send us your kitchen layout, appliance list and the two tone pairing you have in mind, and we will return elevations, a unit schedule and an itemised quotation.

Product finishes, dimensions, minimum order quantities and service scope are confirmed per project at quotation stage; figures and options shown on product pages are indicative and should be verified against the signed specification for your order.