An outdoor swim spa is a serious commitment — it sits on your site for a decade or more, carries electrical and plumbing connections, and is one of the few garden products where a specification error is expensive to undo. Outdoor Swim Spa WS-PC01 is a compact 3-metre model in our configurable swim and hydrotherapy range, and this guide walks through exactly what to check before you commit to it, or to any comparable unit from another supplier.
Start With the Footprint, Not the Features
The catalogue dimensions for WS-PC01 are 3000 × 1050 mm. That number is the shell size, and it is where most buying mistakes begin. Measure three things separately before you approve a position on site:
- The unit itself. 3000 mm long by 1050 mm wide fits a narrow terrace, a side setback, or a poolside deck where a longer spa would crowd the space. If several people will use it at once, check that the internal layout — seats, jet positions and any swim lane — leaves room to move, not just the outer cabinet.
- Access and clearance. The unit has to reach the site intact, and service access matters more than owners expect. Filter pump, water pumps and the control system all need a hand to reach. Confirm the delivery route and leave working space around the equipment side.
- The supporting base. A filled spa is heavy, and the slab or deck it sits on must be level and rated for that load. This is a structural question for your engineer or builder, not something to settle from a product brochure.
Read the Specification Sheet Line by Line
WS-PC01 is specified as follows on our catalogue page. Use this as a template for comparing any model you are quoted — the categories matter more than the particular figures.
| Item | Catalogue value for WS-PC01 | What to verify with your supplier |
|---|---|---|
| Dimensions | 3000 × 1050 mm | Shell size versus internal water volume and usable seating |
| Jet total | 53 pcs | How many are hydrotherapy seats, how many are directional, and where they sit relative to the seating positions |
| Water pump | 2 pcs | Which circuit each pump serves, and whether a swim-training current is included or optional |
| Filter pump | 1 pc | Filtration cycle time and how the schedule is set on the controller |
| Control system | 1 set | Touchscreen or keypad, language, and whether remote control is available |
| LED lighting | 1 pc | Colour options and whether the fitting is serviceable from outside the shell |
| Total power | 6.65 kW | Whether this is the equipment total with or without a heat pump, and the supply your electrician must provide |
| Water treatment | Ozone shown | Whether ozone is standard on your configuration or an added option such as UV sterilisation |
Two of these lines deserve particular attention. The catalogue does not list a swim training system for WS-PC01, so if you want a current to swim against, ask explicitly whether one is fitted or can be added — do not assume it from the words "swim spa". And the 6.65 kW figure covers the equipment shown on this page; heating the water is a separate question with a much larger electrical consequence.
Treat Options as Part of the Purchase, Not an Afterthought
Our catalogue lists control systems, UV sterilisation, additional water pumps, heat pumps, sand filtration, insulation and steps as options across this range. Availability and compatibility vary by model, so a configuration you see photographed on one unit may not be available on the one you are buying. Two of these choices are worth more than their price:
- Insulation. In a cool climate this decides whether the spa is usable year-round and how much the energy bill runs to. Ask what material, what thickness, and whether the cabinet base is insulated as well as the walls.
- Heating. A heat pump usually costs far less to run than direct electric heating over the life of the product. Confirm which option your quotation includes before you compare two suppliers on headline price.
If a standard configuration does not suit the space, we also build customizable shape outdoor spas in square, round, oval and curved forms with an acrylic shell and structural reinforcement. For a villa terrace with an awkward corner or a resort layout that has to follow a building line, a shaped unit is often a better fit than forcing a rectangular one into the plan.
Compare Within the Range Before You Compare Suppliers
WS-PC01 is not the right answer for every site. A closely related model, Outdoor Swim Spa WS-PC01A, shares the 3000 mm length but is 930 mm wide — useful where every centimetre of deck width counts. Where the site allows a longer footprint, our long outdoor swim spa with hydrotherapy and relaxation pool separates a lap-swimming zone from a seated massage zone in one shell, which is what most families and hotel guests actually want: one person exercising while another soaks. For a smaller, purely seated application, a round outdoor hot tub spa with hydrotherapy jets and underwater LED lighting uses its footprint far more efficiently than a narrow swim shell.
A practical way to decide: write down who will use the spa, how many at once, and what they will do in it. If the answer is daily lap swimming plus hydrotherapy, length wins. If the answer is two or three people relaxing after a swim in the main pool, a compact seated spa serves better and costs less to heat.
Judge the Supplier, Not Just the Shell
The specification sheet tells you what arrives. It does not tell you whether it arrives complete, on time, and supported afterwards. For a project buyer — a villa development, a boutique hotel, or a resort adding poolside facilities — these are the questions to put in writing:
Supplier questions worth asking
- Is this unit built to order from a standard configuration, and what is fixed at the point of order?
- What exactly ships in the crate — control system, pumps, filters, steps, ozone or UV unit — and what is sourced locally?
- Who handles freight, customs and delivery to your site, and who is responsible for damage in transit?
- Who commissions the unit on site, and what does that visit include?
- Which components carry warranty, for how long, and which are consumables such as filters and seals?
- What spare parts are stocked, and how quickly can they reach you if a pump fails mid-season?
As a one-stop furniture and building materials supplier, SANTERSON has manufactured for project customers since 2008, with offices in China, Vietnam, Singapore and South Africa. A swim spa rarely arrives alone on our orders: it usually travels alongside outdoor furniture, pergolas, loungers and poolside cabinetry for the same terrace or pool deck. Coordinating all of that through one supplier means one production schedule, one freight booking and one point of contact when something needs replacing later — which is where most of the practical saving on a project actually sits.
A Simple Way to Reach the Decision
Work through four gates in order, and do not move to the next until the previous one is settled. First, the site: footprint, access, base and clearance. Second, the use case: swimming or soaking, how many people, how often. Third, the specification: pumps, jets, treatment, insulation and heating as configured for your unit, not as photographed. Fourth, the commercial terms: what ships, who delivers, who commissions, and what is covered afterwards.
WS-PC01 makes sense where a 3 × 1.05 m footprint is the constraint and a hydrotherapy-focused spa with 53 jets is the goal. It makes less sense where you need genuine lap swimming in the same shell, or where the site cannot give service access to the pump side. Being honest about those two limits before you order saves more than any discount will.
Send us your site dimensions, intended use and target configuration for Outdoor Swim Spa WS-PC01, and we will confirm the equipment included in that build, the electrical requirements, and how it can be coordinated with the rest of your poolside furniture and finishes. Contact PHILLIP on +86-13928214007 (phone/WhatsApp) or santerson@qq.com.