A sample panel arrives, looks convincing on the mock-up board, and then the drawing set shows a curved reception wall, an arched lobby opening and three stair cores that no rigid sheet can wrap. At that point the purchase file for a wood-look wall finish is still empty of everything a buyer actually needs: bend radius limits, fixing method, fire classification, who cuts the panels on site, how the sheets travel, and what happens when a corner is damaged after handover. Documenting those items before the order is placed is what separates a flexible wall cladding line item from a claim variation later.
Start With the Substrate and the Bending Condition
Flexible mineral sheets are specified for exactly the situations where rigid boards fail: curved feature walls, columns, arches, reception desks, soffits and reshaped heritage facades. Before comparing finishes, record the geometry.
- Mark every surface that is not flat on the elevations, with its radius or the tight bend the design intends. Note whether the curve is convex, concave or a compound form such as an arch head.
- State the substrate for each of those surfaces — cement board, plasterboard, rendered masonry or existing tile — because the fixing adhesive and surface preparation change with it.
- Ask the supplier to confirm, in writing for your project, the bending condition they support on that substrate. Do not infer a radius from marketing photographs.
The product literature for our flexible wood grain cement panel describes a thin mineral sheet with a moulded timber-grain surface that can be rolled for packing and formed onto curved walls, arches and special-shaped structures. That is the functional reason to specify it; the exact bending limit still belongs in your file as a supplier confirmation for the specific batch.
Record Material Behaviour, Not Marketing Adjectives
Purchase teams get burned when descriptive words replace testable properties. Convert each claim into a line in the specification with an evidence source.
| Item to document | Why it matters at purchase |
|---|---|
| Base material type | Cement-based and modified-clay (soft stone) sheets behave differently under impact, moisture and cutting. Our range covers both, so name the type on the drawing. |
| Fire performance | The product page states a non-combustible material class for the wood grain cement panel. Ask for the test documentation your certifier or head contractor requires; do not paste a classification into the BOQ without it. |
| Water and moisture resistance | Interior dry areas, wet areas and external facades need different detailings. State which zones the sheet is being bought for. |
| Sheet weight | Bending cladding onto existing walls adds load and affects substrate fixing. Record the weight per square metre against the substrate build-up. |
| Surface finish and colour route | The wood grain cement panel is supplied with a white raw surface that can be painted on site, or with the moulded grain finish. Decide which one you are buying — it changes both price and trade sequence. |
Write the Cutting, Fixing and Tolerances Into the Scope
The commercial argument for flexible cladding is site labour. Capture it explicitly so the main contractor and the supplier are pricing the same job.
- Cutting and drilling: state that panels are cut, drilled and formed on site with standard tools, and name who carries out that work. Our product notes describe on-site processing by cutting, drilling and bending.
- Fixing method: for the mineral sheets in our range this is adhesive to a prepared cementitious or board substrate. Specify the adhesive type and the surface prep required.
- Joints and edges: agree the joint treatment, external corner trim or mitre detail, and the allowance for expansion before ordering.
- Cut-off waste: curved work generates offcuts. Note the wastage assumption you used in the quantity take-off, and whether the supplier delivers full sheets only.
Document Packaging, Freight and Handling Assumptions
A sheet that can be rolled changes the freight calculation, and that is worth putting in writing early. Rolled packing reduces volume and damage risk on long runs of cladding, which is where a large share of landed cost sits for imported fit-out materials.
- Record how the panels are packed, the roll or sheet dimensions, and the pallet or crate count, so your freight forwarder can quote against real numbers rather than an estimate.
- Confirm who handles customs documentation — commercial invoice, packing list, certificate of origin — and who is the importer of record. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail together with the paperwork, but duties, Incoterms and delivery scope should be agreed per project.
- Note unloading and storage conditions on site: rolled mineral sheets and rigid boards must not be stored the same way.
For Australian projects this documentation also protects your programme. Where we have delivered villa and residential work — including cases in Willoughby, Perth, North Turramurra, Melbourne and Sydney — the coordination of joinery, wall finishes and furniture across separate trades is what keeps handover dates stable.
Close the Loop: Warranty, Spares and After-sales Records
The last part of the file is the part most often left blank: what happens after installation.
- Warranty scope and exclusions in writing, including whether site-applied paint finishes are covered.
- Spare quantity for future repair, ordered with the main batch so colour and batch match. Order spares against the same production run as the main order.
- The named contact for snag rectification and spare parts, plus the response arrangement you have agreed.
- Installation records: batch numbers, adhesive lot, substrate photos before covering. These are cheap insurance if a wall has to be reopened.
Our installation and after-sales support covers on-site installation, inspection and snagging, warranty work and spare parts; the specific terms for your project belong in the contract documents.
Where Flexible Cladding Sits Inside a One-Stop Package
Wall finishes rarely fail on their own; they fail at the interface with cabinetry, lighting and doors. When the wall panels, joinery and loose furniture come from one manufacturer, one drawing set and one production schedule cover all of them, which removes a whole category of coordination risk. As part of our turnkey solutions for villa, hospitality and office projects, wall cladding is coordinated with wall panel systems, custom cabinetry and interior fixtures from design through to handover.
If the same curved-wall problem appears in stone or earth finishes rather than timber, our MCM flexible rammed earth panel is the modified-clay alternative in the range, and the same four documentation blocks — bending condition, fixing method, freight packing, spares — apply unchanged.