An outdoor swim spa is not a catalogue item you order off a shelf. On a villa terrace, a resort pool deck or a private residence project, the shell has to fit a fixed footprint, the plant has to match the local supply and the finish has to sit with the surrounding furniture package. That is why buyers increasingly ask about OEM sourcing for the Outdoor Swim Spa WS-SP600 rather than simply choosing a model number. This article walks through how that process actually runs, stage by stage, and what you need to have ready before a factory can quote it.

What OEM Sourcing Means For A Swim Spa

OEM (original equipment manufacturer) sourcing means the factory builds to your specification and, where agreed, under your brand. Instead of reselling a standard model, you control the shell size, the equipment set, the finish and the branding on the unit and its packaging. SANTERSON describes this work under its Custom & OEM Service, which covers custom design and prototyping, bespoke material finishes and textures, OEM manufacturing, flexible minimum order quantities, and brand customisation such as engraving, embossing, logos and packaging.

For a swim spa there are three practical reasons buyers take the OEM route instead of buying a standard model:

  • Footprint discipline. A spa on an existing deck or in a new build has to clear structural edges, drainage lines and access routes. The catalog size for this shell is 5900 × 2500 × 1600 mm; confirming that envelope against your drawings is the first thing an OEM brief settles.
  • Equipment set by duty. The same shell can be built as a lap-swimming unit or as a hydrotherapy-led unit. Those two duties need different jet counts and pump arrangements, and they draw different power.
  • Brand and package consistency. Developers, landscape contractors and hospitality groups often supply the spa inside a wider outdoor package. Matching frame colours, cabinet finishes and signage to the rest of the scheme is easier when the unit is made to order alongside the outdoor furniture around it.

The Reference Configuration: WS-SP600

Useful OEM conversations start from a defined reference unit. The WS-SP600 is listed in the swimming pool range with the following specifications shown on its product page.

ModelWS-SP600
Catalog dimensions5900 × 2500 × 1600 mm
Control system1 set
Swim training system1 set
Filter pump1 pc
Jet total6 pcs
LED lights4
Total power9.35 kW
Features shownWater jets, LED lighting, Ozone, Swim training system

The same shell is also listed as Outdoor Swim Spa WS-SP600-MS, which carries a water pump, a much higher jet total and a higher total power figure on its own product page. That contrast is the point: two units sharing one shell size can sit at very different equipment levels and electrical loads. When you source to your own specification, you decide where in that range your unit lands, rather than accepting whichever variant a distributor happens to stock.

Read the numbers as catalog entries, not as your quotation. The dimensions, jet counts and power figures above are transcriptions of what the product page shows for each model. Included equipment, water pump arrangement and electrical requirements are confirmed per configuration before production, and a water pump is not listed in the captured specifications for the WS-SP600. Treat every figure as a starting point for your own specification sheet.

Stage 1 — Brief And Site Data

A factory cannot engineer from a brochure enquiry. The brief that produces an accurate OEM quotation normally contains:

  • The installation location and whether the unit sits above ground, recessed, or on a platform — with level drawings or measured site dimensions.
  • The intended duty: daily lap swimming, rehabilitation and hydrotherapy, guest amenity at a hotel or resort, or a sales-showpiece for a residential development.
  • Available electrical supply at the site, including phase, available kW and where the isolator and protection will sit.
  • Access route for delivery, from kerb to final position, including gate widths, lift capacity and any overhead obstruction.
  • Target handover date, working backwards from practical completion.

SANTERSON's interior design and project service describes the front of this process as a project brief followed by a design proposal, then quotation and detail confirmation. For a swim spa, that same sequence applies with equipment and services added to the drawing set.

Stage 2 — Locking The Specification

Once the brief is in, the specification is fixed item by item. Catalog-listed options across the swim and hydrotherapy range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so each option is confirmed against the specific shell rather than assumed from the range as a whole.

A practical specification sheet for an OEM swim spa covers:

  • Shell and seating layout — overall envelope, water depth, bench and lounger positions, and where the swim training system is set.
  • Hydraulics — jet count and type, filter pump duty, whether a dedicated water pump forms part of the build.
  • Water treatment — ozone as standard on this range, with UV sterilisation available as an option where specified.
  • Thermal package — insulation level and heat pump selection, which drive running load more than any other single choice.
  • Electrical — control system, total connected load, supply voltage and protection requirements for the destination market.
  • Ambience and finish — LED count and placement, cabinet cladding colour and texture, cover type, and steps or access fittings.
  • Branding — nameplate, engraving or embossing, logo placement and packaging, where private labelling has been agreed.

Stage 3 — Prototyping And Sample Sign-Off

The Custom & OEM service references custom furniture design and prototyping, 3D modelling and material selection across wood, metals, engineered stone and laminates. For a swim spa the equivalent checkpoints are the shell moulding and seating geometry, the cabinet and cladding sample against the finish schedule, and the control panel layout. Buyers who sign off physical samples of the visible surfaces — not just a rendered image — avoid the disputes that arise when a delivered unit looks different from the drawing.

If you are ordering under your own brand, this is also the stage at which nameplate artwork, logo method and packaging artwork are approved. Confirm minimum order quantities here, because they differ by component and finish and set whether a single project unit or a repeat production run is more economical.

Stage 4 — Production And Quality Control

SANTERSON operates as a China-based furniture and building materials manufacturer supplying hospitality, villa and office projects, with a product range that also covers outdoor furniture, bathroom ceramics, lighting, shower systems, wall panels and cabinetry. For buyers, that breadth matters operationally: a spa ordered as part of a wider package can be produced, inspected and shipped on one schedule with the loungers, pergolas, cabana daybeds and poolside dining around it, rather than as an isolated import arriving on its own timeline.

Ask for the inspection record in writing before shipment — hydrostatic and leak check, jet and pump function test, control system test, LED circuit check, and a photographic condition record of the shell and cabinet work. That record is what you reference if a claim is later raised.

Stage 5 — Freight, Delivery And Commissioning

The logistics service describes global freight forwarding by sea, air and rail, customs paperwork including commercial invoices, packing lists, certificates of origin and import permits, packaging and container loading, shipment tracking and door-to-door delivery. Import terms, duties, Incoterms, insurance cover and transit time should be confirmed case by case for the destination country rather than taken from marketing copy.

For a swim spa specifically, plan these items before the container is booked:

  • Crane or forklift capacity at the delivery point, and whether the unit can travel on its own pallet or needs a tilt-frame.
  • A confirmed slab or platform with the correct load rating and drainage, completed before the unit arrives.
  • An electrician briefed on the connected load stated in your specification, not the catalog figure alone.
  • Water fill, drain and overflow connections, plus storage for the cover if it is removed daily.

After delivery, the installation and after-sales service covers on-site installation, inspection and snag lists, warranty coverage, spare parts and replacement, and ongoing maintenance. Warranty terms, response times and exclusions vary, so read what applies to your order and keep commissioning paperwork with the unit file.

A Worked Comparison: Standard Model Or Built-To-Spec

Standard purchase suits a buyer who accepts a published configuration, needs one unit quickly, and has an electrical supply that already matches the catalog load. OEM sourcing suits a buyer whose site dimensions are fixed, whose duty sits between two published variants, or who is supplying several units across a development and wants consistent finish and branding across them.

A resort pool deck is the clearest example. The spa has to align with the pergola and daybed line, match cabinet tones to the outdoor bar, carry the operator's nameplate, and be delivered on the same freight window as the furniture package. None of that happens by selecting a model number from a price list.

What To Send Before You Ask For A Price

  • Site drawings or measured dimensions for the installation position, with level and access notes.
  • Your specification sheet: shell size, jet count, pump arrangement, treatment, thermal package, LED layout, options required.
  • Electrical data for the destination site: phase, voltage, available kW.
  • Quantity and delivery location, plus your target practical completion date.
  • Branding requirements, if the unit is to be supplied under your own name.

Send that package and the quotation comes back against a defined build. Send only a model number and you will receive a catalog price for a configuration you may not want.

Talk to our project team about an OEM swim spa specification, including shell size, equipment set and branding: Contact SANTERSON. Phone and WhatsApp +86-13928214007, email santerson@qq.com.

Enquiries are answered Monday to Saturday, 8:00 AM – 6:00 PM (GMT+8).