A frosted glass aluminium cabinet looks simple on a rendering: a slim metal frame, a translucent panel, a run of carcases under and above the worktop. On site it is one of the few joinery items where three different trades meet — the framer, the glass supplier, the panel supplier — and where a wrong assumption shows up as soon as the first door hangs out of alignment. If you are buying this product range for a villa renovation or an apartment handover, the questions below are what separate a supplier who has built these before from one who is quoting them for the first time.

1. Can they build the whole cabinet, not just the aluminium frame?

Aluminium-framed glass fronts are usually sold as part of a mixed construction: an extruded profile holding the glass, a carcase in board material, and hardware that has to work with both. Ask which parts a supplier extrudes or fabricates themselves, and which they buy in. A supplier who also manufactures cabinets and interior fixtures can set the frame profile, the rebate depth and the fixing detail around your carcase specification instead of forcing your drawing to fit a stock profile.

This matters most on made-to-measure work. Our frosted glass aluminium cabinets are made to measure, with the finish, layout and dimensions specified per project — the same approach we apply across the wider aluminium frame kitchen cabinet collection, including glass front aluminium frame cabinets, smoked glass aluminium cabinets and minimalist black aluminium frame cabinets. If a supplier cannot confirm they will cut to your site dimensions rather than offer you three standard widths, treat the quotation as provisional.

2. Which glass is actually being quoted?

"Frosted" covers several different products with very different behaviour in use: acid-etched, sandblasted, film-laminated and reeded or patterned glass all diffuse light differently, take fingerprints differently, and clean differently. A serious supplier states the type and thickness on the quotation and shows you a physical sample of the exact panel, not a brochure photograph.

Also check what happens on the reverse face. In a kitchen, the inside of a glazed door sees steam, grease and shelf edges. Ask how the glass is finished and framed on that side, whether the panel is sealed or retained with a bead, and whether the frosting is on the interior or exterior surface of the pane.

3. What construction sits behind the glass?

The frame is visible; the carcase is what determines how long the run lasts. Ask for the board material and grade, the edge treatment, the back-panel fixing method and the load rating of the shelves that will carry plates and small appliances. Then ask how the frame profile is fixed to that carcase and whether the joint is adjustable after installation.

A useful test: send one elevation with an awkward detail — a corner return, an appliance housing, a service cut-out — and see whether the supplier returns a shop drawing with dimensions and materials marked, or simply prices the linear metre. The first answer tells you they have built these before.

4. What arrives assembled, and how does it travel?

Glazed cabinet doors are the items most likely to arrive damaged, so construction and packing have to be decided together. Ask whether frames ship assembled with glass inserted or as a knock-down kit for on-site assembly, how each glazed leaf is packed and separated in the crate, and what the container loading plan looks like when cabinets travel alongside ceramics, lighting and stone.

For imported project shipments this is where an integrated supplier earns their fee. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and delivery to site — so the joinery is packed with the rest of the fit-out in mind rather than as a separate parcel from three vendors.

5. Who signs off the drawings before production?

Cabinets are where an architectural drawing becomes a fabrication one, and where site reality — out-of-square walls, floor levels, service runs — has to be reconciled. Ask who prepares the shop drawings, whether they work from your measurements or verify them on site, and at what point production is released against a signed set.

On our side this sits inside the interior design service: space layout planning, concept design, furniture layouts with 3D renderings, and project design coordination covering drawings, production coordination and on-site guidance. The cooperation steps are straightforward — brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up.

6. Can they supply the rest of the fit-out to the same specification?

A glazed cabinet run rarely stands alone: it has to match wardrobes, doors, vanity units and wall panelling in finish and profile. Buying those from one source removes a whole category of tolerance and colour-matching arguments.

Where the same team handles furniture and interior fixtures, aluminium frame glazing can be repeated consistently across the project — the same profile and glass specification appears in our frosted glass aluminium frame wardrobes, so kitchen and bedroom joinery read as one detail. That coherence is the practical argument for a one-stop solution rather than six separate purchase orders.

7. What happens after delivery?

Ask who installs, who adjusts the doors once the building has settled, and how a replacement glazed panel is ordered if one breaks during handover or in use. Then get the warranty terms in writing: what is covered, for how long, what is excluded, and which party handles it when the project is overseas.

Our installation and after-sales support covers on-site installation, inspection and snag lists, warranty coverage, spare parts and replacement, and ongoing maintenance. Response times and warranty scope vary by project and region, so we confirm those terms for your specific site rather than quoting a blanket promise.

Before you place the order — five things to have in writing

  • Glass type, thickness and which face carries the finish, confirmed against a physical sample.
  • Carcase material, grade, edge treatment and shelf load rating for every run you are buying.
  • Shop drawings signed off against verified site dimensions, with an explicit production release point.
  • Packing specification and the assembled or knock-down decision for each glazed leaf.
  • Warranty scope, exclusions, and how replacement panels are supplied after handover.

A quick comparison of the glazing options in this range

Front specificationHow it reads in a projectWhere it is usually specified
Frosted glass aluminium cabinetsSoft, diffused cover; contents are suggested rather than displayedKitchen wall units and pantry runs where stored items stay out of direct view
Glass front aluminium frame cabinetsOpen, transparent display with the frame as the design lineDining and living joinery, display shelving and open-plan divisions
Smoked glass aluminium cabinetsTinted, lower-contrast cover that softens reflectionsDarker palettes, bar and display units, lobby and lounge joinery
Aluminium frame with solid panelSame frame language, closed frontBase units and appliance housings where a glazed leaf is impractical
Two tone aluminium frame cabinetsFrame and panel in contrasting finishesFeature runs that need to separate zones in an open plan

Panel names above follow the product titles published on our site; availability, glass thickness and finish options are confirmed per project.

What a supplier should send you in the first round

A capable response to an enquiry on this product type includes: a shop drawing with your dimensions marked, a material and glass schedule naming every component, a sample of the actual glazed leaf, a packing description, and a price broken down by run rather than one lump sum. If any of those five are missing from the first quotation, ask for them before you compare prices — two quotes that look similar on cost often differ completely on what is included.

Send us your elevation drawings, site dimensions and the finish palette you are working to, and we will return shop drawings, a material schedule and a sample specification for frosted glass aluminium cabinets sized to your project. Enquiries go through our contact page.