An outdoor swim spa is one of the few site-supplied items on a villa or resort project that touches plumbing, electrical work, structure and finishes at the same time. Ordering it from overseas therefore puts the verification burden squarely on the buyer before any purchase order is raised. This guide walks through what to confirm when sourcing the Outdoor Swim Spa WS-SP600-MS for an Australian build, using our own catalogue data as the reference point rather than a sales sheet.

Start with the shell footprint, not the marketing photo

The first number to check is the external envelope. Our catalogue lists this model at 5900 × 2500 × 1600 mm. That figure is a starting point for setting out a slab, a recess or a terrace platform — it is not clearance data. Before any concrete is poured, ask us to confirm:

  • Whether the quoted dimensions are external shell, cabinet face or finished footprint including steps and any optional access panel.
  • The clear opening needed at the delivery path: doorway widths, gate widths, overhead clearance from the truck to the final position, and whether a crane or tail-lift is required.
  • Working clearance around the cabinet for pump, filter and control access, since service hatches need to stay reachable after cladding or decking is installed.

A site visit by the builder with our dimension sheet in hand takes an hour and prevents the most expensive class of rework on these projects.

Confirm what is included in the quoted configuration

Two models can share a name prefix and differ substantially in what arrives in the crate. For the WS-SP600-MS our catalogue records one control system, one swim training system, one water pump, one filter pump, 29 jets and four LED lights. The related WS-SP600 shares the same external dimensions but is recorded with six jets — a large difference in hydrotherapy experience for an identical footprint. If you are comparing quotations from different suppliers, compare jet counts and pump counts line by line, not model names.

ItemAs listed in our catalogue for WS-SP600-MS
Model designationWS-SP600-MS
Catalogue dimensions5900 × 2500 × 1600 mm
Control system1 set
Swim training system1 set
Water pump / filter pump1 pc / 1 pc
Jet total29 pcs
LED lights4
Total power (catalogue figure)11.55 kW
Features shownWater jets, LED lighting, ozone, swim training system

Treat every figure above as a catalogue entry to be reconfirmed in writing against the exact configuration you order. Optional items — control upgrades, UV sterilisation, additional water pumps, heat pumps, sand filtration, insulation and steps — are catalogued across the range but their availability and compatibility vary by model.

Electrical supply: the number that decides the quote

The catalogue total power for this configuration is 11.55 kW. In Australian domestic and villa installations, a load of that order normally points to a dedicated three-phase circuit rather than standard single-phase outlets, but that determination belongs to your licensed electrician and the local network distributor, not to an overseas supplier. What we can supply on request is the equipment-level information your electrician needs:

  • Per-circuit connected load for the pumps, filter pump, ozone generator, LED lighting and control system, so the switchboard schedule can be prepared properly.
  • Supply voltage and phase options available for the selected configuration, matched to what is already on site rather than assumed.
  • Cable entry locations, isolator position requirements and residual-current device expectations as stated in our technical documentation.

Ask your electrician to sign off the load calculation before the order is placed. Upgrading a switchboard after the spa arrives is far costlier than specifying it correctly at the outset, and any electrical work must be carried out by a licensed practitioner to the wiring rules and state requirements applicable to the site.

Water treatment, drainage and heating scope

Ozone is listed as a feature on this configuration. Confirm how sanitisation is split between ozone and any chlorine or bromine dosing you intend to run, and whether UV sterilisation is included or optional for your build. Then settle the plumbing boundary early:

  • Who supplies and installs the overflow, drain, primer tap and any balance tank — we supply the spa systems, the local plumber connects to site services.
  • Where the discharge goes, including pump-out routing and whether an overflow to the garden is permitted on the site.
  • Whether a heat pump is part of the quotation or a separate purchase, and what insulation package comes with the cabinet for year-round operation.

Put these boundaries in writing as a responsibility matrix between supplier, builder and plumber. On this category, delays almost always trace back to an assumed scope that nobody owned.

Freight, duties and the delivered price

A swim spa ships as a bulky, heavy unit, so the freight line is not a rounding error. When you request a quotation, ask for it on stated terms and check which of the following sit inside the price and which fall to you:

  • Packing method and container type, plus how many units fit per container if you are ordering for several dwellings or villas.
  • Sea freight, marine insurance, Australian customs clearance, duty and GST on the landed value, and port charges at the destination.
  • Last-mile delivery to site, including whether a crane truck or tail-lift is included and what access the driver needs.

Our logistics team handles freight forwarding, export paperwork and door-to-door delivery on project shipments. Australian import terms, duties, Incoterms, transit time and delivery scope are quoted case by case for each destination state — ask for them in writing rather than relying on general marketing statements.

Site preparation and installation sequence

Sequence matters more than speed. A practical order of work looks like this:

  • Confirm final spa position, dimension sheet and delivery route with the builder.
  • Complete excavation, footings and slab to the engineer's specification for the filled weight, not the dry weight.
  • Run electrical submains, isolator and any data cabling; have the electrician verify the load calculation.
  • Set the unit, level it, connect services, then commission with a witnessed start-up before handover.

We offer on-site installation support, inspection and snags, spare parts and maintenance as part of our project service scope. Confirm installer availability for your state, the warranty terms that apply to this configuration and what is excluded before you rely on them in a programme.

Documents worth requesting from any supplier

Ask for these six items before you sign: (1) a dimensioned general arrangement drawing; (2) an itemised equipment list matching the quoted configuration; (3) electrical load data per circuit with supply options; (4) the water treatment and filtration specification; (5) a written warranty statement covering shell, cabinet, pumps and controls, with what voids it; (6) the delivered-price breakdown on stated Incoterms. If a supplier cannot produce all six, the comparison is not like for like.

If your project needs a different footprint or plan shape, we also produce customisable outdoor spas in square, round, oval and curved configurations with an acrylic shell, which is often the better route for terraces with constrained geometry. The same applies to the surrounding deck, pergola and cabana daybed that frame the spa zone.

Send us the model designation, your site state and the configuration you want quoted, and we will return a dimensioned drawing, equipment list and delivered-price breakdown for the Outdoor Swim Spa WS-SP600-MS before you commit to any site works. As a China-based furniture and building materials manufacturer working on villa, resort and hospitality projects across Australia, we coordinate the spa alongside the surrounding outdoor furniture, paving and finishes so one supplier owns the package — start the enquiry at our contact page.