When open plan kitchen cabinetry moves from a rendering into a real hotel suite, apartment or villa kitchen, the difference between two suppliers is rarely visible in the brochure. It shows up in a physical sample and in the line-by-line detail of a quotation. If you are procuring custom interior fixtures for a project, the sample and the proposal are the two documents that decide whether the installed kitchen matches the design intent — and whether the price you signed is the price you pay.
1. Request samples at the level you will actually be judged on
Ask for a door panel sample, not just a colour chip. A full door or drawer-front sample shows the edge treatment, the wrap or lamination quality around the profile, and how the finish behaves where light hits it at an angle. Our handleless minimalist kitchen cabinets are specified with matte solid finishes and subtle wood textures, and those surfaces look very different under warm task lighting than they do on a printed swatch.
Check four things on every sample you receive:
- Edge and corner quality — run a fingernail along the edge; lifting, glue lines or a thin wrap are early failure points in high-use kitchens.
- Colour and grain consistency — compare two samples from the same batch side by side, then place both against your countertop and wall finish.
- Surface resistance — wipe the sample with a damp cloth and a mild cleaner several times over a few days and watch for dulling or swelling at the edges.
- Hardware feel — soft-close hinges and drawer runners are specified on paper but judged by hand; ask to see the actual hinge brand and runner type fitted to the sample.
2. Make sure every proposal prices the same scope
Most price gaps between quotations come from different scopes, not different margins. Before comparing figures, list what each supplier includes and what it leaves out:
- Base cabinets, wall cabinets and tall pantry units — or only the visible runs.
- Supporting hardware: cabinet hinges, drawer slide rails, support legs and connecting brackets.
- Countertop supply and cut-outs for sinks, cooktops and integrated appliances.
- Internal storage partitions, pull-out corner units and any illuminated glass display cabinets.
- Lighting provisions such as under-cabinet light strips and built-in LED lighting in glass cabinets.
- Packaging, freight, delivery address and who handles unloading and on-site installation.
Our custom built-in kitchen cabinets are quoted with customisable sizes, panel materials, surface finishes and matching furniture hardware, so the hardware line appears explicitly rather than being absorbed into a single unit rate. Ask every supplier to do the same.
3. Read the specification for open-plan specifics
Open plan cabinetry is judged from the living area, so details that sit quietly in a closed kitchen become prominent. Check that each proposal states how services and appliances are concealed, whether the island back panel is finished to match the front, and how the cabinet run resolves into the adjacent living wall. Our open plan kitchen cabinetry is specified as interior fixtures for open-plan spaces, with layout, dimensions, door styles, materials and finishes tailored to the design — a proposal that only lists linear metres of cabinetry has not answered those questions.
Useful specification lines to insist on: panel material and board type; surface finish system; door style code and colour reference; carcass and back-panel thickness; hardware make and closing mechanism; appliance cut-out dimensions; and tolerance allowance for on-site levels. Where a supplier will not commit in writing, treat it as an exclusion.
4. Compare after-sales and installation terms, not just unit rates
A lower unit rate can disappear once site corrections are priced. Confirm whether the quotation covers site measurement, production drawings for your approval, packing and container loading, freight by sea, air or rail, customs paperwork, delivery to site, installation and snag inspection. Ask how replacement panels and spare hardware are supplied later, since a matching panel ordered two years after handover has to match the original batch colour and finish.
If you want a single supplier accountable for cabinetry alongside other interior fixtures, our turnkey furniture and building materials company covers design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then installation and handover.
5. A practical comparison checklist before you sign
| Item to verify | What a complete answer looks like |
|---|---|
| Sample | Full door/drawer-front sample plus the actual hinge and runner fitted |
| Scope | Tall units, island panels, internal fittings and lighting listed separately |
| Finish reference | Named colour and texture code, referenced to the approved sample |
| Appliances | Cut-out dimensions and ventilation confirmed against your appliance schedule |
| Delivery | Packaging method, freight mode, delivery point and unloading responsibility |
| After handover | Written process for spare panels, hardware replacement and snag rectification |
Send the same drawing, the same appliance schedule and the same finish shortlist to every supplier. Proposals priced from different information cannot be compared honestly — and open plan kitchen cabinetry is exactly where those gaps become visible on the finished wall.
For sample requests and proposal review on your project, contact SANTERSON — a China-based furniture and building materials manufacturer supplying custom interior fixtures for hotel, apartment and villa projects worldwide.