Guest bathroom fit-outs succeed or fail on details that never make it into the render: how much floor a basin leaves clear, whether its glaze reads as the same white as the wall tiles and grout, and whether every room of the same type can be ordered, shipped and installed to one detail. The Wall Hung Ceramic Basin 1051B was drawn for exactly this kind of work — a compact, wall-mounted vitreous ceramic sink built to sit inside a repeatable guest-room bathroom detail. This guide walks through the selection checks a specifier or procurement lead should run before locking in the model for a hotel room type.
Why Wall-Hung Basins Keep Appearing in Guest-Room Drawings
A wall-hung basin fixes to the wall through its back panel, so the floor beneath stays open. In a guest bathroom that matters twice over: housekeeping can mop and sanitise straight under the bowl without working around a pedestal or a vanity carcass, and the empty floor line makes a narrow room read wider than it is. There is no cabinet to keep dry, no plinth to trap moisture, and fewer components on site to damage in transit.
The trade-off is that the wall has to do the work. Wall-hung fixtures need solid fixing behind the finish — a reinforced stud frame, timber nogging or masonry — plus the waste and supply arrangement, whether concealed or exposed, agreed with the plumbing contractor before tiling. Run that check first, because it decides whether a wall-hung model is even viable for the room type you are pricing.
Reading the 1051B Specification
The published description for model 1051B gives an overall size of 400 × 380 × 450 mm, one tap hole for a single mixer, and a curved, minimalist front profile. Treat those figures as the starting point for coordination rather than final numbers: confirm the dimensioned drawing and the plumbing rough-in against the current technical data sheet before any drainage set-out is issued, since waste position and bracket centres are what your plumber actually builds to.
What the size tells you in practice:
- 400 mm width sits comfortably in a compact guest bathroom or ensuite where a 500 mm+ basin would crowd the door swing or the shower entry.
- 380 mm projection keeps the bowl clear of the mirror zone and reduces the risk of splashing onto a wall-hung WC directly below or beside it.
- One tap hole means a single-lever mixer, not a three-hole basin mixer or a deck-mounted spout — decide the tapware now so the rough-in and the tapware order match.
Material and Finish: What Holds Up Under Housekeeping
The 1051B is made from vitreous ceramic with a dense, glossy glaze. For high-turnover bathrooms this is the practical choice rather than the decorative one: a dense body with a hard, glassy surface resists limescale marking and stain, wipes back clean with the mild cleaners housekeeping already uses, and does not need a sealing regime the way natural stone basins do. When you evaluate any ceramic basin for a hospitality project, ask the same three questions:
- Is the glaze applied to the underside and the rear face, or only the visible basin? Unsealed undersides collect dust and mark during handling.
- Does the overflow arrangement sit flush enough to clean, or is there a lip that will hold residue?
- Will the white tone of this batch sit against the white tone of the matching wall-hung WC, the bath and the grout you have already specified? Order one room set and check it under site lighting before repeating the model across floors.
Specifying a Coordinated Suite Instead of Separate Line Items
The 1051B is part of a matching sanitary suite, and that is the strongest argument for it on a multi-room project. Pairing it with the wall-hung toilet from the same series gives you one design language across the room — the same curve, the same glaze, the same floating detail — without asking your supplier to colour-match two unrelated ranges. Where a guest type needs more storage or a wider basin, take the additional items from the same bathroom sanitary fixtures catalogue so the vanities, mirrors and accessories are coordinated at the drawing stage rather than reconciled on site.
One coordination point worth noting: within a range, product titles and technical data blocks do not always use identical wording for a model. Specify by model number plus the current dimensioned sheet, and have your plumbing consultant sign off the trap and rough-in details before the tile setting-out drawing is frozen.
Buying It as Part of the Fit-Out Package
Ordering ceramics through the same supplier that handles joinery, wall finishes, lighting and loose furniture removes most of the interface arguments. As a hotel furniture and interior fit-out supplier, SANTERSON works from design consultation and space planning through material selection, production, logistics and installation on one contract, so the basin, the vanity it sits beside and the room it belongs to are quoted and shipped together rather than tracked as separate purchase orders.
For a project buying across several room types, that single package also lets you vary finishes deliberately: keep the wall-hung format for compact standard rooms, then step up to a larger or gold-line basin in suites while holding the same installation detail. Confirm quantities, spares allowance and delivery sequence per floor with your supplier before release, and put the room schedule in writing early enough that ceramics, joinery and finishes reach the same container plan. Freight terms, import requirements and site access still need confirming for your own project rather than assuming a service level.
A Pre-Order Checklist Before Release
- Wall construction behind the basin verified as suitable for wall-hung fixing, with bracket positions set out before tiling.
- Waste and supply rough-in confirmed against the current 1051B technical data sheet, not the marketing image.
- Tapware selected as a single-hole mixer to suit the reserved tap hole.
- One sample room set approved under site lighting for glaze tone and proportion before repeating the model across floors.
- Matching WC and accessories from the same series listed in the same schedule, with spares held for maintenance.
- Installation and snagging sequence agreed so basins arrive after wet trades are complete and before final handover inspection.
If you are pricing a guest-room bathroom type and want the 1051B coordinated with the rest of the room, send us the room drawing and fixture schedule and we will quote it as part of the turnkey interior project solution for your hotel or villa fit-out.