A wall mounted sink looks like a small line item on a bathroom schedule until the first site visit: the basin sits too far from the tapware, the waste lands where it cannot, or the wall behind it will not take the load. The Wall Hung Basin 1038WB is a compact, back-panel mounted ceramic washbasin made for exactly those tight hotel and residential situations. This guide walks through the six checks a buyer should complete before confirming an order, so the decision rests on drawings and site conditions rather than on a catalogue photograph.
1. Confirm what the basin is made of and how it is fixed
The 1038WB is crafted from high-grade vitreous ceramic and fixed to the wall through its back panel, so no floor area is taken up and the tile below can be wiped in a single pass. Two questions follow directly from that construction. First, what is the wall build-up — masonry, brick leaf, or timber stud with noggings? A back-panel fix needs continuous solid support behind the fixing zone, and stud walls normally require reinforced blocking before tiles go on. Second, which carrier is used: an in-wall frame, a concealed bracket set, or direct fixing into masonry anchors. The basin itself does not decide this; the wall assembly and the chosen carrier do, and both should appear on the shop drawing you send back for approval.
2. Read the shape for splash control, not only for style
The 1038WB has a streamlined modern profile with proper bowl depth to keep water from splashing over the rim. When you review it against your own layout, check three dimensions on the technical sheet: internal bowl depth, distance from the tap spout to the overflow, and the clear width in front of the basin once the mirror cabinet is hung. A shallow but wide bowl suits hand-washing in a guest powder room; a deeper bowl serves better where staff rinse brushes or fill vessels. The same streamlined shape also lets the basin sit comfortably in different decoration schemes, which matters when one product code has to work across guest rooms, serviced apartments and public restrooms.
3. Match the waste, trap and rough-in before anything else is signed off
Wall hung ceramics fail on site most often because the drainage point was set out from a rendering instead of from the fixture specification. Request the current technical data sheet for the 1038WB and confirm the trap type, the centre of the waste outlet relative to the finished floor level, and whether a concealed or exposed bottle trap is intended. Then have your plumber mark the actual outlet on site and compare it with the drawing. If an existing renovation cannot be reopened, say so at quotation stage — that is when an alternative from the same range becomes the cheaper answer, rather than a change order after delivery.
4. Decide how the basin will be used day to day
The 1038WB is offered for family bathrooms, guest washrooms, hotels and commercial restroom projects, and each of those settings puts different wear on the same piece. For a hotel guest bathroom, ask whether tapware will be deck-mounted on the wall above or brought through the basin itself, and how many cleaning cycles a week the glaze will face. For a commercial restroom, count daily users honestly and choose tapware with a matching duty rating. For a private villa, the more useful question is visual: does the finish read well next to the chosen flooring and wall panel, or does it disappear? Write the answers into the schedule so that pricing, tapware and accessories are quoted together rather than in three separate orders.
5. Specify the basin as part of a coordinated set
Ordering ceramics one code at a time is how glaze tones and design languages drift apart across a building. The 1038WB can be grouped with other bathroom sanitary fixtures from the same catalogue so that basins, wall hung WCs and matching ceramic pieces share one design line and one delivery. A comparable option for a compact guest bathroom is the Wall Hung Ceramic Basin 1051B, which uses a gently curved minimalist form with a dense glossy glaze and a single reserved tap hole. Comparing two or three codes side by side — depth, projection, fixing method, tap-hole arrangement — gives you a defensible reason for the choice instead of a preference that has to be justified later.
6. Treat sampling, packing and spares as part of the purchase
Before the full quantity is released, ask for one sample basin and mount it on a mock-up wall with your own tapware and mirror in place. Photograph it under the room's actual lighting at night, not only in daylight; glaze and shadow read very differently. At order stage, confirm how the basins are packed for export, whether corner protection is used, and how many spare pieces belong in the container so that a damaged unit does not stop handover on the last floor. SANTERSON supplies these basins for wholesale and bulk project orders, with custom and OEM service, door-to-door logistics and after-sales support handled through the same team, which keeps one point of contact from the mock-up wall to practical completion.
A short pre-order checklist
- Wall build-up confirmed, with reinforcement behind the fixing zone on stud walls.
- Current technical data sheet received; trap type and waste rough-in cross-checked against site.
- Bowl depth and projection reviewed for the intended use, not only for appearance.
- Tapware position agreed — above the basin or through it — with clear access for cleaning.
- Basin specified within a coordinated fixture set, with matching wall hung WC where required.
- Sample mounted and photographed under real room lighting before quantity is released.
- Packing standard, spares allowance and delivery address written into the order.
An informed decision on a wall hung basin is mostly paperwork done early: drawings, rough-in levels, use case and packing confirmed before production starts. If you are scheduling basins for a hotel, villa or apartment project, send us the room layout and the fixture quantities and our team will confirm which code fits your wall condition and delivery plan.