A rammed earth feature wall looks effortless in a finished homestay lobby or villa lounge, and it is usually the last item on a project schedule to be discussed and the first one to cause a delay. Send a manufacturer a vague line on a drawing — "feature wall, earth tone" — and you will get a quotation for something rigid, heavy and wrong for your substrate. This guide sets out exactly what to put in front of the factory when you are specifying an MCM flexible rammed earth panel, the bendable soft stone cladding used on curved and special-shaped surfaces, so the sample, the price and the delivered goods all match the design intent.
Start With What the Material Actually Is
MCM flexible rammed earth panel is a modified clay wall cladding — often called soft stone or soft ceramic — that reproduces the rough, layered texture of a traditional rammed earth wall. The sheet is thin and flexible, so it can be bent onto curved walls, cylinders and shaped surfaces that rigid stone or a cast in-situ earth wall simply cannot follow. Because the panel is light, it reduces load on the wall behind it, travels in smaller packages, and goes down with site tools rather than lifting equipment.
Two things to be clear about before you write the brief. First, this is a cladding applied over a prepared base — cement-based substrate or gypsum board, fixed with tile adhesive — not a structural earth wall built up on site. Second, it is a decorative finish whose value sits in the texture and the colour band, so the sample approval stage matters more here than it does for a plain painted surface.
The Eight Items Your Brief Must Contain
Manufacturers quote faster and more accurately when all of the following are in one message rather than three email threads.
- Substrate and location. Interior or exterior, and what is behind the finish: cement render, blockwork, plasterboard, existing tile or an old facade. External work changes the adhesive choice and the detailing at the top edge, so say so up front instead of leaving the factory to assume.
- Geometry. Flat runs in square metres, plus every curved element: column diameters, arch radii, reveal depths, inside and outside corners. Radii drive whether a panel can be cold-bent on site or needs a different approach, so give real numbers from the drawings rather than "curved wall".
- Quantity with a breakdown. Total area, split by wall or room, plus an allowance for cuts and wastage on curved work. A single lump figure hides where the difficult labour is.
- Colour and texture reference. The rammed earth look is produced in a white band and an earth brown band. State which one you want and send a photograph or physical sample of the target surface — a rammed earth wall you have visited, a competitor's installed wall, a mood board swatch. Text alone will not get you the tone you are picturing.
- Joint and edge detail. How the panel meets skirting, ceiling, glazing and door frames, and whether you want visible joints or a tight shadow gap. This is decided in the drawing, not on site.
- Fixing method and who installs. Confirm tile adhesive on a cement base or gypsum board, and state whether your local contractor fixes it or you need installation guidance from the supplier.
- Delivery terms and destination. Port or site address, packaging requirements, and how the panels are to be packed so edges survive the journey. For an Australian site, agree who handles import clearance before goods ship.
- Sample approval route. Ask for a physical sample of the exact colour batch before production is booked, and put the approved sample on file as the reference for the whole order.
A Spec Sheet You Can Copy Into Your Enquiry
Fill this in and paste it into your enquiry. The empty cells are the ones that most often come back wrong.
| Product | MCM flexible rammed earth panel / soft stone cladding |
| Surface finish required | Rammed earth texture — colour band: white / earth brown (circle one), sample reference: |
| Total area and breakdown | |
| Curved elements and radii | |
| Substrate | Cement base / gypsum board / other: |
| Interior or exterior | |
| Fixing method | Tile adhesive, applied by: local contractor / supplier's team |
| Destination and delivery basis | |
| Sample required before production | Yes — send to: |
Questions Worth Asking the Factory
A serious supplier answers these directly; a trader gives you marketing language back.
- Which colour batch does the sample come from, and will the production order be drawn from that same batch?
- What is the minimum bending radius you will stand behind for this panel, and what do you recommend below it?
- What adhesive and primer do you supply or specify for external use, and what detailing do you recommend at the exposed top edge?
- How are panels packed for a long sea leg, and what is the edge protection?
- What is on the drawing pack — cutting layout, joint details, fixing details — and in what format?
Where This Material Earns Its Place on a Project
The projects that get the most out of bendable soft stone are the ones where the wall is not flat. Homestays and boutique hotels use it to carry an earth-toned feature wall around a reception desk or up a curved stair core. Restaurants and retail shops use it as a backdrop that photographs well and can be applied over an existing surface during a short refurbishment. Villa work uses it on interior feature walls and on facade renovation, where the low weight avoids loading up the existing structure. Cultural tourism and older building renovation is another common fit, because the cladding goes on top of what is already there rather than replacing it.
If your project needs the same flexible soft stone approach with a different texture, the MCM flexible travertine stone veneer replicates the natural hole pattern of travertine and is specified with the same kind of brief — substrate, radii, colour reference and fixing method.
Ordering Through a One-Stop Project Supplier
Wall cladding rarely sits alone on a fit-out. When the same supplier is producing joinery, furniture and other finishes for the project, your cladding brief travels with drawings that already exist, and the joint details get resolved once instead of twice. SANTERSON is a China-based furniture and building materials manufacturer working on villa, hospitality and office projects, with custom and OEM service, logistics and door-to-door delivery arranged by the project team, and installation and after-sales support. Scope, packaging, freight terms and service commitments are agreed per project — put your drawings in front of the team and get them confirmed in writing for your site.
Send the substrate detail, the areas, the radii and your colour reference in the first message. That single step is what separates a sample you approve from a container you have to argue about.
Quick Answers
Can flexible rammed earth panel go on a curved wall?
Yes — that is the main reason to specify it. The panel is thin and bendable, so it wraps curved walls, columns and shaped surfaces. Give the manufacturer the actual radii in your first enquiry.
What does it get fixed to?
A cement-based base or gypsum board, using tile adhesive. Panels can be cut on site with simple tools, and joint treatment is straightforward.
Is it suitable outside?
The material is used for exterior wall cladding and facade renovation. State clearly in the brief that the run is external so the adhesive system and edge detailing are specified for that exposure.
How do I make sure the delivered colour matches the design?
Approve a physical sample before production, confirm which batch it came from, and hold that sample as the acceptance reference for the delivery.