A bench-and-picnic-table set that has to survive a sea crossing, a customs queue and a site that is not finished yet. The planning below is what we ask project buyers to lock down before the purchase order for this teak-look aluminium outdoor bench and integrated picnic table set is signed, not after the containers are already on the water.

Start with what actually ships

This product group covers two configurations that share the same teak-effect aluminium slat look, and they behave very differently on site. The minimalist bench pairs seating with a small side tray, which is the piece that goes beside infinity pools and rooftop relaxation corners. The integrated picnic table has benches fixed to the table by a solid X frame, built for group meals in resort and shared garden areas where loose chairs walk off or get stolen.

Before you quote freight, confirm which configuration each area needs. Mixing them up is the most common reason an outdoor order arrives complete but wrong: a rooftop gets the fixed picnic table when it needed benches with trays, and the courtyard ends up with loose seating in a high-traffic zone.

Confirm dimensions and finish on the drawing, not the brochure

For project orders we adjust dimensions and colour tones to match the design intent, so the numbers in your specification sheet are yours, not ours. Fix these before production starts:

  • Overall length, seat height and tray size for each bench, checked against the paving grid and any pool coping edge.
  • Tabletop length and the clear circulation width around the fixed benches. Fixed benches cannot be pulled out of the way, so allow room at both ends for service trolleys.
  • Slat colour tone against a physical sample board, since a teak-effect aluminium finish reads differently under strong sun than it does in a showroom.

Once the drawings are signed off, production follows the same route as our other project work: material selection and product specification, then manufacturing and quality control. Any change after that point becomes a re-production cost and a delayed vessel.

Choose the delivery terms you can actually manage

Our logistics team arranges sea, air and rail freight forwarding, packing and container loading, customs paperwork such as commercial invoices, packing lists and certificates of origin, shipment tracking and door-to-door delivery. That covers the movement; it does not cover your import duty or local clearance liability, which is a buyer-side item in most arrangements.

Situation on site What to arrange before ordering
Completed villa or resort with storage indoors Consolidate the outdoor set with other outdoor furniture in one container, delivered to a covered holding area near the installation zone.
Handover still months away Agree a staged release: produce together, ship or deliver in two drops so the set is not sitting on an exposed site.
Remote island or regional resort Plan a port of entry plus inland leg; confirm who books the local truck and who signs for it at the gate.
Rooftop or upper terrace with no lift access Check the largest single packed piece against stair, door and service-lift clearances before the crate is built.

Ask us for the packing list dimensions early and pass them to your site agent. A fixed picnic table arrives as fewer, heavier units than loose seating, and that changes the unloading crew you need on the day.

Sequence the order against the rest of the fit-out

Outdoor sets rarely fail on their own; they fail because the deck, the shade structure or the service route is not ready. Coordinate the bench order with the adjacent scope: hardtop and pergola positions, paving levels, drainage outlets, and where housekeeping will store cushions during storms.

The same aluminium-frame language runs through the wider collection, so if a project needs matching swing bench and chaise lounge sets or dining sets in the same slat tone, order them on one production batch. One batch means one inspection visit, one container plan and one colour reference instead of three.

Inspection before the container is sealed

For project quantities we handle production coordination and quality control as part of the order. Use that stage rather than discovering problems at your port:

  • Slat colour and finish against the approved sample, checked on every batch, not one.
  • Frame welds and the X-frame geometry on the picnic tables, since square frames make installation quick and out-of-square ones do not sit flat on paving.
  • Hardware kits counted and labelled per set, with spares packed separately so a lost bolt does not stop an install.
  • Crate markings that match your purchase order line items, so the site team can sort deliveries without opening everything.

Photograph the sealed crates at loading. That record is what makes a claim on the freight forwarder or insurer straightforward if a container arrives with damage.

Unloading, assembly and handover

Aluminium construction keeps the units light enough for a small crew to move by hand, and it removes the maintenance load of solid timber; the material is not prone to rot, insect damage or salt-spray corrosion in the way timber is. Assembly on site is mostly bolting fixed benches to the frame and setting benches level on the finished surface.

Walk the installed sets with your facilities manager before signing off: check that every unit sits flat, that adjustable feet are set, and that nothing has been scratched during positioning. Record serial or item numbers against the packing list so future spare-part requests reference the right configuration. Our service scope also covers installation support and after-sales, including spare parts and replacement, so keep those records on file.

Documentation to keep after delivery

  • Signed specification drawings with the dimensions and colour codes you approved.
  • Packing list, commercial invoice and certificate of origin for customs and asset registers.
  • Inspection photos from production and loading.
  • As-built layout showing where each configuration was placed.

These four documents are what turn a one-off purchase into a repeatable specification for the next phase of the project.

Planning an outdoor order across borders? Send us the layout drawing, the quantities per area and your delivery location, and we will come back with the configuration split, packing dimensions and a shipping plan you can check against your site programme. Enquiries go through our contact page.