A swim spa rarely fails on its own shell. It fails in the seams — the slab it sits on, the power that feeds it, the shade above it, and the seating and screening that make the surrounding deck usable after the water is turned off. That is why procurement teams treat a Outdoor Swim Spa WS-PC07ST-S as one line item inside a wider outdoor package, not as a standalone purchase that arrives late in the programme.
The model is a 7-metre hydrotherapy and swim unit from our configurable range. Read on for how we sequence it against pergolas, daybeds, lounge furniture and finishes so that one order, one shipment and one installation window cover the whole poolside zone — for villas, boutique hotels and resort fit-outs.
What WS-PC07ST-S actually gives you to design around
Before coordinating anything else, fix the envelope. The catalogue lists this model at 7000 × 2400 × 1470 mm, with a control system and a swim training system each supplied as one set, one filter pump, six jets in total, four LED lights and a total power figure of 6.55 kW. The features shown for the configuration are water jets, LED lighting, ozone, a swim training system and an automatic cover option.
Envelope figures to hand to the structural and M&E team
Footprint 7000 × 2400 mm, depth 1470 mm. Total power 6.55 kW. Treat these as catalogue values for the base configuration: confirm the final equipment list, electrical load and any optional items with us before the joint detail is frozen.
Two consequences follow immediately. First, the 7000 mm length drives the slab, the waterproofing upstand and the circulation route past the unit — a 2400 mm width leaves little room for a side maintenance gap unless it is drawn deliberately. Second, an automatic cover option changes the clear zone at one end of the shell, so anything placed there (a planter, a steps run, a balustrade return) has to be set after the cover direction is confirmed.
Optional accessories in this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so the accessory list belongs in the same specification sheet as the pergola and furniture schedule — not in a separate email chain three months later.
Step 1: Lock the wet zone before you schedule anything dry
Work outward from the water. In a coordinated package we settle these in order:
- Shell position, orientation of the swim training end, and which side carries the filter pump and control system for access.
- Cover swing or retraction zone, plus steps if the selected configuration includes them.
- Deck finishes, drainage falls and the slip rating you require for the wet surround — confirmed with your designer, not assumed from a sample.
- Power route, isolation point and the load calculation based on the specified configuration.
Everything else in this article is furniture and shading. Those items are forgiving; the slab and the electrical run are not. Reversing the order is how projects end up with a pergola post standing where the cover needs to travel.
Step 2: Shade and structure — the layer most often bought too late
A swim spa used in shoulder seasons, or on a terrace with no natural overhead cover, needs a roof structure that is engineered to the same drawings as the deck. Our motorized louvered aluminium pergola is specified in exactly this situation: rotating aluminium louvers adjust the microclimate below, close fully against light rain, and carry built-in LED strips so no additional lighting fixture has to be detailed into the poolside ceiling. Zip screens can be fitted on any side for low sun, wind and privacy.
Because we make the pergola rather than resell it, bay dimensions, frame colour and screen transparency are tailored to the drawing — which is what allows the post line to clear the spa envelope, the cover zone and the deck drainage run in one coordination pass. For a covered lounge adjacent to the spa rather than over it, the aluminium cabana daybed collection does the same job at furniture scale: a louver-roof version for sun and rain control, or a soft fabric canopy with privacy curtains for a lighter tropical look, both on aluminium frames suited to humid, chlorine-rich pool environments.
Step 3: Furniture that survives the same microclimate
The area around a swim spa is not a garden. It is wet, chlorinated or salt-treated, and used at night under LED light. Frames should be aluminium with a powder-coated finish, cushions should be outdoor-grade fabric, and everything should sit clear of standing water on the finished deck level.
For the lounge edge of the zone, our Modern Aluminum Outdoor Sofa Set for Patio — chaise, two armchairs and a slatted coffee table — is the configuration we most often pair with a spa on a villa terrace or boutique hotel deck: aluminium structure, weather-resistant cushions, and custom finish, fabric and dimensions for hospitality orders. Across the wider outdoor furniture collection you will find rope weave, wicker, teak-look slat tops and sling loungers in matching frame finishes, which is how a designer keeps one material palette from the spa edge to the garden boundary.
Practical rule for the schedule: order seating with the same frame finish and textile family as the cabanas and pergola fabric. Mixed suppliers produce near-matches in aluminium colour that read as errors on a photograph, and no re-order fixes a shade difference between two factories.
Step 4: Finishes, screening and the boundary line
Spa zones are overlooked more often than they are under-designed. Laser-cut metal screens and glass partitions define the edge without building a wall; acoustic sliding panels let a hotel open a spa terrace to the pool deck and close it again. Where the spa sits inside or against a built envelope, wall panelling, stone and marble surfaces, aluminium ceilings and engineered flooring carry the same colour and texture language indoors, so the transition from wet zone to interior does not look like two separate projects.
This is where a single manufacturer earns its place on the programme: the screen frame colour, the pergola frame colour and the louvre finish are produced against one approved sample, not three.
Step 5: One package, one shipment, one installation window
As a one-stop furniture and building materials supplier, we handle the swim spa, shading structure, seating, screens and finishes as one order under one project file. Our cooperation steps are straightforward: a project brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up. Freight is arranged by sea, air or rail with customs paperwork, packing and container loading planned around the site sequence — spa shell first, structural shading next, furniture and soft goods last so nothing is stored on site for weeks.
Import terms, duties, transit time and delivery scope are settled case by case with your team. We do not publish a guaranteed lead time across projects, because port and site conditions differ; what we commit to is that the coordination happens once, in one specification.
Coordination checklist before you place the order
- Final configuration of WS-PC07ST-S confirmed — accessories, cover direction, steps, and total power for the electrical design.
- Slab, upstand, drainage falls and access gap dimensioned from the 7000 × 2400 mm footprint, not from a rendered image.
- Pergola post positions checked against the cover zone and the filter pump access side.
- One approved finish sample covering pergola frame, furniture frames and screen frames.
- Deck slip rating and wet-surround material agreed with the designer of record.
- Delivery sequence written into the contract: shell, structure, finishes, furniture.
Send us the drawing, not just the model number. If you are specifying a swim spa for a villa, resort or hotel terrace, share the layout with our team and we will return a coordinated package — spa configuration, shading structure, seating, screens and finishes — under one quotation. Contact PHILLIP on WhatsApp +86-13928214007 or email santerson@qq.com.
Specifications quoted above are catalogue values for the referenced configuration and should be verified against your selected build before any structural, waterproofing or electrical detail is finalised. Local installation requirements and codes must be confirmed with the design team and contractor of record in the project country.