A request for quote that only names a product and a quantity rarely gets a useful answer for outdoor furniture. Two buyers can ask for the same teak-look aluminium bench and picnic table set and receive prices that are not comparable, because one assumed fixed benches, the other assumed adjustable dimensions; one assumed a rooftop install on a finished deck, the other assumed a garden lawn base. The quotation difference is usually not in the furniture itself but in everything left unstated around it.
This guide lists what a buyer should put in the request for quote when sourcing teak-look aluminium outdoor bench and integrated picnic table sets for villa, resort, clubhouse or community projects, and what the supplier needs in return to quote accurately the first time.
Start With the Two Configurations You Are Actually Buying
This product family covers two distinct items that share one slatted teak-effect aluminium look. The first is a bench with an integrated side tray, used as seating with a small surface for drinks and towels beside pools and on rooftop relaxation areas. The second is a picnic table with attached benches and an X frame, intended for group dining in shared gardens and resort terraces. A quote request that says "50 sets" without saying which configuration, or whether both are needed in one order, will produce a number you cannot compare against another supplier's.
In the enquiry, separate the items into their own line entries with their own quantities, and state the use case for each location: poolside, rooftop, clubhouse courtyard, community garden or guest villa terrace. That single detail changes what a manufacturer recommends about frame detailing, fixing method and cushion provisions.
The Information a Supplier Needs to Price Correctly
| Item to state in the RFQ | Why it changes the price |
|---|---|
| Exact configuration per line: bench with side tray, or picnic table with fixed benches | Different structures and different amounts of aluminium; quantities are not interchangeable |
| Required overall dimensions and seat height, or confirmation that standard sizes are acceptable | Dimension changes affect frame cutting, slat count and packing volume per container |
| Colour tone for the frame and for the teak-effect slats | Non-standard tones may need a separate powder batch and can carry a minimum order quantity |
| Quantity per configuration, plus any spare or replacement units you want quoted separately | Spare parts quoted later at small quantities cost far more per piece |
| Installation setting: rooftop deck, paved courtyard, garden ground, pool surround | Determines fixing hardware, levelling provisions and whether anchoring is in scope |
| Destination port or door-to-door address, and preferred Incoterms | Packing method and container loading plan differ between port delivery and site delivery |
| Whether the order ships alone or consolidates with other furniture and building materials | Consolidated shipments reduce handling but require one agreed packing schedule |
| Required delivery window tied to your site programme | Production slots are booked against a date, not against an "asap" request |
Specify the Material Scope Without Assuming "Teak"
The value of this product family is that the frames and slats are aluminium rather than solid timber, so the upkeep a timber bench needs, oiling, checking for rot and dealing with insect attack, does not apply. The product page also describes resistance to rot, insects and salt spray, which is why these sets appear in coastal resort and poolside specifications.
Two points belong in the RFQ so the quotation matches your specification:
- Confirm whether the teak effect comes from the finish applied to an aluminium slat or from a different core, and ask for the finish system and colour reference used on the quoted units.
- Ask what the supplier's warranty covers in writing, meaning frame, finish and hardware, and what it excludes.
If your project has an outdoor furniture standard to meet, name that standard in the request and ask the supplier to state which tests they can provide for the quoted configuration. Do not assume a certification applies to a modified size or colour unless it is confirmed for that build.
Ask About Customisation in the Same Enquiry
Dimensions and colour tones can be adjusted to project design requirements, which is why custom projects should not be quoted from a catalogue entry alone. For a custom configuration, include in the RFQ:
- The drawing or dimension sketch you are working from, with the critical dimensions marked: overall length, seat height, and tray size on the bench version.
- Whether you need a prototype or sample before the full production run, and who pays for it.
- Any branding requirement, such as an engraved plate on the table frame.
- The finish samples already approved by your designer, referenced by code rather than by description.
For a wider outdoor package, buyers often pair these benches with other aluminium pieces from the same furniture series, such as a modern aluminium outdoor sofa set for the lounge zone. Quoting the whole outdoor package together lets you compare frame finishes across items and check that tones match before production, rather than discovering a mismatch after delivery.
Set Out Commercial Terms You Expect
A complete RFQ states the commercial terms you want quoted, so responses can be compared line by line:
- Pricing broken down per configuration, with tooling or customisation charges shown separately.
- Payment terms and what triggers production start.
- Packing specification: carton dimensions, pieces per carton, total volume and weight, and the proposed container loading plan.
- Lead time from confirmed drawings, not from the enquiry date.
- What after-sales support covers once goods arrive, including spare parts availability for hardware such as fixings and slat clips.
A practical check: send the same RFQ to two or three suppliers and compare the questions they come back with. A supplier who asks about your site base, fixing method and programme date is pricing the real job. A supplier who returns only a price is pricing something else.
How a Turnkey Supplier Changes the Enquiry
If outdoor furniture is one part of a larger fit-out that also includes cabinetry, wall and ceiling finishes, lighting or ceramics, a single enquiry to a one-stop furniture and building materials supplier keeps the frame tones, timber-look finishes and metal tones consistent across indoor and outdoor zones. In that case the RFQ should include the full item schedule grouped by zone, one consolidated delivery plan, and a named contact for site coordination during installation.
SANTERSON is a China-based furniture and building materials manufacturer working on villa, hospitality and office projects, with services covering design coordination, custom and OEM production, door-to-door logistics and after-sales support. Enquiries that arrive with the schedule above can be quoted against your programme rather than re-opened several times.
Before You Send: A Short Checklist
- Each configuration on its own line, with quantity and location in the project.
- Standard or custom dimensions stated, with critical dimensions marked.
- Colour tone referenced by code, with approved samples noted.
- Site base and fixing method described for every install location.
- Destination, Incoterms and required delivery window given.
- Packing data and container plan requested in the quotation itself.
- Warranty scope and spare parts provision asked in writing.
A request for quote that carries these details comes back as a comparable, production-ready number. One that does not comes back as a price you cannot use, and a project that starts with an assumption about size or tone usually pays for it after the containers arrive.