Outdoor Swim Spa WS-S08M is one of the more heavily jetted shells in our configurable swim and hydrotherapy range, so the difference between a good specification and an expensive mistake usually comes down to two questions: what the shell and cabinet are actually made of, and which finishes and options you have ticked on the order sheet. This guide walks through both, using the published WS-S08M data as the reference point.

Start with the envelope, not the jet count

The catalog lists WS-S08M at 8020 × 2260 × 1280 mm. That footprint is what decides where the unit can sit — on a terrace, in a garden courtyard, beside a villa pool deck — and it also decides how much of the budget goes into structure rather than features. A longer or wider shell needs more reinforcement, so before you compare jet packages, confirm that the dimensions fit your slab, access route and clearance for servicing.

For comparison, our catalogue lists Outdoor Swim Spa WS-S08CT at 8000 × 2400 × 1420 mm and Outdoor Swim Spa WS-S07M at 7000 × 2200 × 1480 mm. Same "eight-metre class" label, materially different plans. Read the numbers on each product page rather than assuming a size band.

Shell material: what to ask for in writing

In this product family the water-holding body is an acrylic shell. Acrylic is the practical choice for a swim spa because it forms in one piece, so there are no seams for the jet fittings to leak against, and its surface takes and holds colour better than a painted or laminated panel. On our premium swim spa pages we describe the same construction logic: an acrylic interior paired with a reinforced cabinet and a high-performance water system.

What buyers should confirm per order, because these are not interchangeable terms:

  • Shell type and forming method — one-piece acrylic shell versus layered or panel-built construction.
  • Cabinet and frame material — the load-bearing structure behind the shell, and how it is protected from ground moisture.
  • Insulation specification — insulation is listed as an option across this range, not a fixed inclusion. Ask what is insulated: base, side walls, or both, and at what thickness.
  • Finish of the exterior cabinet — cladding colour and panel type, which is what your terrace will actually look at every day.

Finishes: the part buyers specify last and regret first

Two finish decisions shape daily use more than any jet count:

1. Lighting colour and placement

The WS-S08M specification shows 1 LED light plus 26 small LED lights. That is a practical way to read the lighting plan: one main fixture for visibility, and a field of small points for atmosphere at night. If your project sits in a hotel or resort setting where the spa reads as a design feature after dark, ask whether additional fixtures can be added to the configuration and how they are accessed for replacement.

2. Deck-adjacent trim and steps

Steps are an option in this range rather than a given. Decide early, because step height interacts with your finished deck level — retrofitting after the shell is set on the slab usually means rework at the surround.

How WS-S08M compares on equipment

Once the envelope and finishes are settled, the equipment list is where two similar-looking shells diverge. The published figures below show how much a configuration can move within one length class:

SpecificationWS-S08MWS-S08CTWS-S07M
Catalog dimensions (mm)8020 × 2260 × 12808000 × 2400 × 14207000 × 2200 × 1480
Control system1 set1 set1 set
Swim training systemNot listed in the captured specification1 setNot listed in the captured specification
Water pump / filter pump2 pcs / 1 pc1 pcs / 1 pc3 pcs / 1 pc
Jet total58 pcs35 pcs40 pcs
Total power6.95 kW8.35 kW10.75 kW
Features shownWater jets, LED lighting, OzoneWater jets, Temperature setting, LED lighting, Ozone, Swim training systemWater jets, LED lighting, Ozone, Waterfall, 4 water columns

Two things follow from this table. First, more jets does not mean more power: WS-S08M reaches 58 jets at a total power figure of 6.95 kW, while units with fewer jets are listed higher. Jet count and electrical load are separate decisions, and both need to be checked against the supply available on site. Second, the swim training system is not listed for WS-S08M in the captured specification, whereas WS-S08CT lists one. If counter-current swimming is a requirement rather than an idea, choose the model whose page states it, or ask us to confirm what can be added.

Options that change the price but not the shell

The catalogue for this range lists control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps as options. Availability and compatibility vary by model, so treat each line as a question to answer on your own quotation:

  • Ozone versus UV — WS-S08M already shows ozone; ask whether UV sterilisation is offered in addition, and what it changes for your chemical regime.
  • Heat pump versus standard heating — the running-cost conversation depends on this choice more than any other single line.
  • Filtration type — sand filtration appears as an option; confirm the filtration actually quoted for your unit.
  • Insulation and steps — decide these before the shell is placed, not after.

Before you sign: confirm included equipment and electrical requirements for the selected configuration. Two orders of the same model number can differ once options are added, and the specification block on a product page describes a reference build.

A six-point comparison checklist

  1. Dimensions against your site — slab size, access for delivery, and servicing clearance around the plant.
  2. Shell and cabinet construction — one-piece acrylic shell, reinforced cabinet, and how the structure is protected from moisture.
  3. Jet package against intended use — hydrotherapy focus or a mixed swim-and-soak routine.
  4. Total power against your supply — read the kW figure for your exact configuration, not the model family.
  5. Finishes and lighting plan — main fixtures plus small points, exterior cladding colour, step arrangement.
  6. Option list in writing — heating, sterilisation, filtration, insulation and steps named line by line on the quotation.

Where WS-S08M sits in the wider range

If you are specifying a spa for a villa or hospitality project, the swim spa rarely arrives alone — it is part of an outdoor package that also involves paving, screening and poolside furniture. That is where a single supplier who already handles swimming pools and swim spas alongside other building materials and outdoor products saves you coordination work: one specification set, one shipment plan, one point of contact for the parts that have to arrive together.

Where a standard catalogue shell does not suit the space, we also produce customisable-shape outdoor spas — square, round, oval and curved layouts built on an acrylic shell with structural reinforcement, for gardens, terraces and leisure areas where the geometry is fixed by the architecture.

Frequently asked questions

Is WS-S08M a swim spa or a hot tub?

It is listed in our outdoor swim and hydrotherapy range, with water jets, LED lighting and ozone shown as features. A swim training system is not listed for this model in the captured specification — if you want counter-current swimming as a fixed requirement, pick a model whose page states that system.

Why do two units of the same model have different running costs?

Because heating, insulation and filtration are options. The 6.95 kW total power figure describes the reference build; your quoted configuration is what determines the load.

Can the finishes be matched to an existing deck?

Exterior cabinet finish, lighting arrangement and step type are all specification choices. Send us the deck drawings and we will confirm which combinations are available for this shell.

Next step

Open Outdoor Swim Spa WS-S08M, note the dimensions and power figure against your site conditions, then send us the layout you are working to. We will return a configuration with shell, cabinet, insulation and options stated line by line, so the comparison is between like for like.