A high gloss PVC kitchen cabinet can reach site looking intact and still be rejected on inspection. The panels are sound; what failed is the wrapping that was supposed to protect a reflective surface through every handling event between the factory floor and the kitchen. For buyers ordering made-to-measure cabinetry from a one-stop furniture and building materials supplier, packaging is not a logistics footnote — it belongs in the product specification, and it is one of the cheapest things to get wrong.
The reason gloss surfaces are unforgiving is optical: a defect on a high gloss door shows up as a reflection, so a mark that would pass unnoticed in a matte texture becomes a visible line under kitchen lighting. The questions below are therefore worth putting in writing before production starts, not after the container has been loaded.
What Our High Gloss PVC Cabinet Range Actually Ships As
Our High Gloss PVC Cabinets sit in the PVC kitchen cabinet collection and are built to project-specific dimensions, finish and layout. That made-to-measure approach has a direct effect on packaging: there is no standard carton size to fall back on. Every order is packed against its own drawing — door sizes, carcase depths, panel counts and the hardware set that goes with them.
The same applies across the wider PVC group. Matte PVC cabinets, the wood grain PVC cabinet and the Glass Front PVC Cabinet have different protection needs: glass fronts need separation and edge protection, and a wood-grain surface needs corner protection so that the wrap itself does not press a crease into the pattern.
Seven Things to Confirm Before Production Starts
| Point to confirm | What to ask the supplier | Why it matters on site |
|---|---|---|
| Surface protection on gloss faces | Is a protective film applied to both faces, and can it be peeled off cleanly after installation? | Film that hardens or leaves adhesive behind adds cleaning time per door and risks pulling at the surface. |
| Interleaf between doors | Are gloss doors separated sheet by sheet, and are they packed face-to-face or back-to-back? | Unprotected gloss panels rubbing together in transit produce fine scratches visible under raking light. |
| Edge and corner protection | Are corner protectors used on panel edges, and are door edges supported so they do not bear on each other? | Damaged PVC edge banding is the kind of defect that surfaces at handover, when it is already a claim. |
| Carcase and door packing split | Are doors packed separately from carcasses, and is each unit labelled to a room and elevation? | A fit-out crew working room by room cannot find the right door in a mixed stack; that search time is labour cost. |
| Palletising and strapping | What pallet size, what strapping pattern, and how are panels restrained against shifting inside the container? | A load that shifts turns intact bundles into crushed ends. Ask which end of each bundle faces the container door. |
| Marking and packing list detail | Does the outer marking match the shop drawing numbers, and does the packing list show contents per bundle? | Customs clearance and site receiving both rely on the same numbering; mismatched lists stall both. |
| Spare and replaceable parts | Are spare hinges, handles and shelf pins packed in a marked box rather than loose inside a bundle? | Loose hardware knocks against gloss doors and is hard to reconcile when anything needs reordering. |
Ask for Photos of the Actual Order, Not a Sample
The most useful pre-shipment request is photographs of your own packed bundles — before loading and after loading. A generic packing photo tells you what the factory usually does; photos of your order tell you whether the agreed specification was followed on this container. Ask for a shot of the film on a door, a shot of an opened bundle showing the interleaf, and a shot of the strapping pattern.
Packing details are order-specific. Packaging construction, protective film type, pallet standard and container load plan should be re-checked against your own drawing and written into the order before production starts, rather than carried over from a brochure or an earlier project. We confirm dimensions and selected specifications for each project instead of assuming one packing standard suits every job.
How Packaging Fits Into a Door-to-Door Order
Cabinetry rarely travels alone on a project. A villa or apartment fit-out usually moves cabinets together with wardrobes, vanities, wall panelling and flooring from the same logistics and door-to-door delivery arrangement. Mixed cargo changes the packing decision: a gloss door bundle that would be fine on its own pallet may need different stacking when it shares a container with aluminium ceiling panels or engineered oak flooring, where heavier items must not bear on a gloss face.
This is also where custom and OEM service overlaps with packing. If you have asked for brand marking, private labelling or custom packaging, that requirement should be confirmed in the same conversation as the cabinet specification — not raised at the packing stage, when tooling and print lead times are already committed.
Receiving the Delivery: A Short Site Checklist
- Photograph bundle condition before the strapping is cut. Damaged wrapping is easier to claim against when it is documented as found.
- Count bundles against the packing list on the day, not at the end of the fit-out.
- Open one bundle per gloss colourway and inspect under raking light before installing — a batch defect caught at bundle one saves stripping a whole kitchen.
- Keep the film on doors until paint, stone and electrical trades have finished in that room.
- Record the drawing number of any damaged unit straight away, so the replacement is ordered against the correct size and finish.
Related Products Worth Reviewing
- Outdoor Ready PVC Cabinets — for external and semi-exposed kitchen runs, where packing and handling need to protect the board as well as the finish.
- Shaker Style PVC Cabinets — profiled door fronts, which need edge support rather than flat-face protection alone.
- Custom Built-in Kitchen Cabinets — interior fixtures specified for hotel and apartment projects.
- Installation and After-sales Support — what happens after the bundles reach site.
Send us your kitchen drawing. We will confirm dimensions, finish selection and the packing plan for that specific order before production begins, so the condition of the goods on arrival is settled in advance rather than argued about at handover. Contact our team to start a specification review.
Product specifications, protective film type, pallet and container load arrangements are confirmed per project and may differ between orders.