A two tone lacquer wardrobe is one of the easiest built-in pieces to get wrong and one of the easiest to get right once the ordering path is clear. The colour split has to land where the designer intended, the lacquer sheen has to match across every door panel, and the carcass has to fit a room that was measured on site, not drawn from a catalogue. For villa, apartment and hotel bedroom programmes, that combination of finish precision and made-to-measure sizing is exactly why buyers move from off-the-shelf purchasing to OEM production.

This guide walks through how OEM sourcing actually runs for this product family at SANTERSON, what you supply, what the factory supplies, and where projects usually lose time if the sequence is skipped.

What OEM Means in Practice for Lacquer Wardrobes

Two terms get used interchangeably in enquiries, and they are not the same thing. Custom production means we build to your design: your drawings, your chosen finish combination, your interior layout. OEM manufacturing means we make it under your brand — your logo on the packaging and product marking, your labelling standards, your specification sheets, with our factories handling the making.

For Two Tone Lacquer Wardrobes, both routes start from the same base product in our Lacquer Wardrobes collection. The specification is deliberately open: made-to-measure sizing, material and finish options, and a layout tailored to each project. That openness is the point — a two tone lacquer door that works in a villa bedroom may be dimensioned and banded completely differently for a serviced apartment.

As a China-based furniture and building materials manufacturer, we produce these wardrobes in the same workshops as the rest of the fit-out scope — kitchen cabinetry, vanities, wall panelling, doors, flooring and lighting — which matters when a two tone door has to sit flush against adjacent joinery.

Stage 1: The Brief You Send

Everything downstream depends on the quality of the opening brief. A workable enquiry for a two tone lacquer wardrobe project contains:

  • Room dimensions and wall conditions — floor-to-ceiling height, skirting, cornice, uneven walls, and whether the unit is recessed or freestanding.
  • The two-tone split you want: which panels carry the darker tone, where the transition falls relative to handles, and whether the tones wrap the door edges.
  • Sheen target for the lacquer — high gloss or matte — and any reference sample you already hold.
  • Interior configuration: hanging zones, drawers, shelving, glass or mirror inserts, integrated lighting.
  • Quantities by type, delivery destination, and the installation party on site.

If you do not have drawings yet, our interior design service can take the project from space planning through concept boards and 3D renderings before anything is cut. That step is where most two tone decisions get settled — a rendering shows whether the tone split reads as designed at real room scale.

Stage 2: Specification and Quotation

Once the brief is in, the specification is locked item by item rather than guessed. For lacquer work this is where a project either holds together or drifts.

DecisionWhat gets fixed at this stage
Colour pairingBoth tones confirmed against physical samples, not screen colours. Lacquer mixes shift under warm and cool site lighting.
Finish familyHigh gloss and matte lacquer behave differently on edges and handles; the same colour in two sheens is not one product.
Substrate and structureCarcase material, door construction and edge treatment are set so the two tones meet cleanly at every joint.
HardwareHinges, slides, handles or handleless profiles — chosen to suit the tone split rather than fitted afterwards.
Branding (OEM only)Logo placement, engraving or embossing, packaging and labelling artwork approved before production.

We quote against that locked specification. Minimum order quantities are set per project rather than applied as a fixed number, so confirm the quantity you actually need with your contact before budgeting.

Practical note: confirm both tones against physical samples before the order is placed. On site, colour reads differently from a screen swatch — and on lacquer that difference shows up in every door of the run.

Stage 3: Production and Quality Control

With drawings signed off and the order confirmed, panels move into production in our own workshops rather than being brokered through a third party. For lacquer wardrobes the checks concentrate on the things a buyer cannot fix after despatch:

  • Sheen consistency across all doors from the same batch, checked side by side.
  • Edge and profile wrapping on two tone doors, where a thin band of the second tone is easy to misalign.
  • Carcass dimensions against the signed site measurements, with each unit marked for its room.
  • Interior fittings installed and tested — drawers, slides, doors on their hardware cycles.

Where a project also needs matching pieces from the same lacquer family — High Gloss Lacquer Wardrobes for feature bedrooms, or Matte Lacquer Wardrobes where a softer surface is specified — those are produced in the same run so the finishes stay consistent across the building.

Stage 4: Packing, Freight and Handover

OEM sourcing only pays off if the goods arrive installable. Freight is arranged by sea, air or rail with the paperwork handled — commercial invoices, packing lists, certificates of origin and import documentation — plus container loading plans that keep lacquered panels protected and crate numbering aligned to room-by-room installation sequence.

On arrival, installation support covers on-site fitting, inspection and snag resolution, with warranty handling and spare parts behind it. For multi-unit projects this is where a single supplier across wardrobes, built-in furniture and finishes earns its keep: one coordination line instead of several vendors arguing over where the wardrobe meets the wall panel.

Where OEM Projects for This Product Typically Stall

Three avoidable problems account for most rework on two tone lacquer wardrobe orders:

  • Tone split decided after the door is cut. The transition point has to be set before panel sizing, or the split lands awkwardly against handles and skirting.
  • Gloss and matte mixed from one colour reference. They need separate approvals; a single swatch cannot cover both.
  • Site measurements taken before floor and ceiling finishes are complete. Made-to-measure wardrobes only work if the openings are final.

None of these are difficult to prevent — they just have to be handled in the right order, which is what the specification stage exists for.

A Simple Sequence to Plan Against

PhaseYour inputsOur outputs
Brief and designRoom data, tone direction, quantities, destinationLayout proposal, 3D rendering where needed
Specification and quoteApproved tones, sheen, interior layout, branding artworkLocked specification, itemised quotation, MOQ confirmation
ProductionSigned drawings, purchase orderManufacturing with finish and dimension checks
Delivery and handoverSite readiness, receiving partyFreight, documentation, installation and snagging

Start an OEM enquiry for two tone lacquer wardrobes

Send room dimensions, your two-tone direction and target quantities, and we will return a specification and quotation for review. Contact PHILLIP on +86-13928214007 (phone/WhatsApp) or santerson@qq.com, or use the contact page.

If you are sourcing wardrobes as part of a wider fit-out, review the Custom & OEM Service and Interior Fixtures range to see what else can be coordinated in the same production run.