Why the Submittal Matters More Than the Finish Sample
A matte acrylic cabinet front can look identical in two quotations and still be a completely different product. The substrate behind the acrylic, who edges the panel, how the door is hinged, and what tolerance the carcass is built to all sit underneath the surface. A matte acrylic cabinets product submittal is the document that puts those hidden variables on paper before an order is released, so the approving party signs off on a defined build rather than a photograph.
For residential kitchen packages and for apartment or hotel joinery where the same door style repeats across many units, the submittal also becomes the reference for production, packing and site installation. Everything below is what we ask buyers, contractors and designers to have in the file before they compare quotations or place an order.
1. Door Construction and Substrate
The acrylic finish is a surface layer. The submittal should state what it is bonded to and how the edges are closed, because that determines flatness, edge durability in humid kitchens, and how the door behaves over years of opening and closing.
- Substrate type and panel thickness for the door.
- How the acrylic sheet is applied to the front face, and whether the wrap continues over one, two or four edges.
- Edge treatment: wrapped, machined or profile edge banding, and the colour match between front and edge.
- Whether a back film or balancing layer is used on the reverse face.
- Maximum unsupported door height the factory will produce in this construction, and any reinforcement for tall doors.
Ask for these as stated values, not adjectives. "Premium matte acrylic" tells a purchaser nothing; a substrate thickness, an edge detail and a maximum panel size tell them whether the door suits the elevation.
2. Finish Schedule: Sheen, Colour and Grain Direction
Matte is not one finish. Specify it precisely so the same reference can be produced on a second batch or matched to matte acrylic wardrobes supplied for the bedrooms of the same project.
- Colour reference: RAL, NCS or a named swatch from the supplier's own acrylic card, quoted exactly.
- Sheen expectation and whether the sample is single-sided or double-sided.
- For textured or metallic-effect acrylics, the grain or brush direction as it must appear on the elevation.
- Which surfaces are visible in the finished installation, so the same grade is applied there.
Where a project mixes finishes, put them side by side in one schedule. A kitchen that pairs matte fronts with high gloss acrylic cabinets on tall units should show both codes, the transition detail, and who supplies the trim between them.
3. Carcass, Layout and Made-to-Measure Dimensions
Our matte acrylic kitchen range is made to measure: sizing, layout and finish are set per project rather than picked from fixed widths. That flexibility only pays off if the dimensions in the submittal are the ones production will build to.
- Cabinet width, height and depth for every run, with the reference numbering that ties each unit to a drawing.
- Carcass material and panel thickness, plus back panel type and fixing method.
- Adjustable shelf positions, fixed dividers, and where fillers and scribes are located.
- Plinth or leg detail, toe-kick depth, and worktop interface.
- Site tolerances: which dimensions are fixed by the building and which absorb out-of-square walls.
Any deviation from the design drawing should be listed as a note in the submittal rather than discovered at site. If a services run, flue or pipe forces a cut-out, it belongs in the file before manufacture.
4. Hardware Specification
Hardware is where budget quotations quietly diverge. The submittal should name each item and state whether it is included or supplied by others.
| Item | What to record in the submittal |
|---|---|
| Hinges | Brand, model, closing action, and rated cycle count from the hardware supplier's data sheet |
| Runners | Full or partial extension, load rating, soft-close option |
| Handles | Handle, profile handle or push-open; finish code; fixing centres |
| Tall units | Larder or pantry fitting, tall-unit hinge set rated for the door height |
| Integrated appliances | Ventilation route, door weight limit, and the interface detail to the appliance panel |
| Lighting | Cabinet light positions, transformer location, and who supplies the electrical feed |
If a handleless profile is specified, confirm the aluminium or PVC profile type, the corner detail, and the minimum finger clearance at the top of a drawer bank. These details change both cost and build.
5. Drawings, Elevations and Sign-Off Record
A complete set is more useful than a pretty render. The submittal should carry:
- Plan layout with clearances at walkways and appliance doors.
- Elevations of every run, dimensioned, with door swing directions marked.
- Cross-sections at worktop, plinth, tall-unit returns and any curved or scribed junction.
- A schedule tying each unit number to its finish code and hardware set.
- A signature block for the approving party, dated, with a revision number on every sheet.
Revision control protects both sides. When a wall moves or an appliance changes, the superseded sheet stays in the file and the new one is re-issued, so nobody manufactures from a stale drawing.
6. Packaging, Delivery Sequence and Site Handling
For international orders, the packing information in the submittal decides whether matte fronts arrive ready to hang. Ask for:
- Packing method per component: edge protection, corner protection, interleaving, and whether doors ship loose or hung.
- Carton marks that match the drawing unit numbers, so crews know which box belongs to which run.
- Container loading plan or a consolidated delivery sequence by room or floor for multi-unit projects.
- Storage guidance on site, since acrylic fronts should stay dry, flat and out of direct sun until installation.
This information is part of the door-to-door logistics we arrange, including packing, container loading and shipment documentation. Buyers should still confirm Incoterms, import terms and delivery address for their own project rather than assume a standard service level.
7. Installation Method and Snag Process
The final pages of the submittal should describe how the work is completed, not only how it is made: levelling method for carcasses on uneven floors, wall fixing type for the substrate on site, door adjustment procedure after hanging, and the sequence for fitting worktops and appliances against the cabinets. Then state how snags are recorded and closed out, and what happens if a panel has to be remade.
For projects where we handle installation and after-sales support, this is also where responsibilities are drawn: which trades prepare the services, who protects finished fronts during other works, and what evidence a claim needs. Write it down while the document is still being agreed, not after a problem appears.
Submittal completeness check
- Door construction and substrate stated with thicknesses
- Finish codes quoted exactly, including edge and reverse face
- Made-to-measure dimensions tied to numbered drawings
- Hardware named, with included and excluded items separated
- Elevations, sections and revision numbers issued for sign-off
- Packing, carton marking and delivery sequence defined
- Installation method, snag process and responsibility split recorded
Send us your drawings
If you are specifying matte acrylic fronts for a villa kitchen or an apartment joinery package, send the elevations and finish references and we will return a submittal in this structure: construction detail, dimensioned units, hardware schedule and packing plan. We also produce matching built-in pieces such as custom built-in kitchen cabinets for hotel and apartment projects, so the same document format covers cabinetry across the whole fit-out.
Contact SANTERSON — phone/WhatsApp +86-13928214007 (PHILLIP), email santerson@qq.com — with your unit numbers and finish references, and we will quote against the specification rather than a picture.