A swim spa looks simple on a specification sheet until it lands in a project with cabinetry, flooring, outdoor furniture and lighting already on the same purchase order. This article sets out how to budget and scope the Outdoor Swim Spa WS-S06B-T inside a multi-product project, using the figures published on its catalogue page and the service stages that sit around it.
Why a swim spa is harder to scope than it looks
In a villa or resort fit-out, the pool element rarely arrives alone. It shares a site with built-in joinery, wall cladding, terrace furniture and sanitaryware, all ordered by different people on different schedules. Three things push a swim spa out of a simple line item:
- It is not a single fixed configuration. The catalogue lists optional accessories for this range — control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Each option changes the price and the site preparation that follows it.
- Its electrical load has to be coordinated with the rest of the build. The published total power for WS-S06B-T is 8.75 kW. That figure has to reach the electrical contractor before cable routes and distribution boards are finalised, not after tiling.
- It competes for the same site window as other trades. Delivery, crane or access arrangements, foundation work and commissioning all need a slot in a programme already occupied by flooring, doors and furniture installation.
Step 1 — Fix the envelope before the price
The catalogue dimensions for WS-S06B-T are 5800 × 2200 × 1420 mm. Treat those numbers as the starting point for a spatial study, not as the final clearance requirement. Two checks come first:
- Footprint and access. Confirm the delivered module can reach the terrace, courtyard or podium through the actual gates, lifts and setbacks on site — the longest dimension usually decides this, not the internal area.
- Depth and relationship to surrounding levels. A 1420 mm shell reads differently when it is fully in-ground, partially recessed, or raised on a deck with steps. Each option carries different civil, waterproofing and decking work, and those costs belong to other trades.
If the site cannot accept a rectangular module of this size, the range also includes a Customizable Shape Outdoor Spa with square, round, oval and curved shell options, which is worth pricing as an alternative early rather than discovering the constraint at shop-drawing stage.
Step 2 — Read the specification as a scope boundary
The WS-S06B-T page lists a defined set of equipment. Writing it out line by line is the fastest way to see where the quotation ends and someone else's scope begins.
| Item shown on the catalogue page | What to check against your project scope |
|---|---|
| Catalogue dimensions 5800 × 2200 × 1420 mm | Deck, plinth, waterproofing and drainage levels around the shell |
| Control system: 1 set | Position of the control point, access for operation and maintenance |
| Swim training system: 1 set | Whether the programme expects lap swimming as a stated amenity |
| Water pump: 1 pc / Filter pump: 1 pc | Pump room or equipment niche, noise separation from bedrooms and amenity areas |
| Jet total: 40 pcs | Seating and hydrotherapy layout; jet count differs across the range |
| LED lights: 3; 26 small LED lights | Low-voltage wiring, switching and lighting-control integration |
| Total power: 8.75 kW | Supply capacity, protection device and dedicated circuit on the electrical drawings |
| Features shown: water jets, temperature setting, LED lighting, ozone, swim training system | Which of these are required by the brief versus which can be value-engineered out |
Two practical notes. First, the equipment list above is what the catalogue shows for this model; included equipment and electrical requirements should be confirmed for the specific configuration you order. Second, jet count, pump quantity and total power vary between models in the same family, so comparing sibling configurations side by side is a legitimate way to manage budget rather than simply cutting options.
Step 3 — Compare within the range before you cut options
The same catalogue carries several configurations around the same footprint, each with a different balance of jets, pumps and load. Rather than stripping accessories from one model, compare what the brief actually needs:
- WS-S06B-T — 5800 × 2200 × 1420 mm, 40 jets, one water pump, swim training system, total power 8.75 kW.
- WS-S06B — 5800 × 2200 × 1250 mm, 48 jets, three water pumps and a waterfall feature, total power 13.35 kW; the catalogue specification for this model does not list a swim training system.
- WS-S06CT — 5880 × 2380 × 1400 mm, 31 jets, one water pump, swim training system, total power 8.35 kW.
- WS-S06M — 5900 × 2200 × 1610 mm, 48 jets, two water pumps and four water columns, total power 6.95 kW.
Read that comparison as a trade-off map: within this family, the configurations with more pumps and extra water features carry the higher published loads, while units with one pump or a simpler feature set sit lower. Match the load to what the site supply can deliver and to what the brief asks for, rather than value-engineering hydrotherapy capacity out of the specification. The Swimming Pools and Swim Spas category page is where the full range sits for that comparison.
Step 4 — Put the swim spa into the procurement package, not beside it
This is where a multi-product project either holds its budget or loses it. When the pool shell, terrace furniture, wall cladding, engineered flooring and sanitaryware are bought separately, each supplier produces its own drawings, and interface decisions fall between them.
SANTERSON operates as a one-stop furniture and building materials supplier, so the swim spa can sit in the same package as the surrounding scope. In practice that means:
- One specification set. The pool shell, decking adjacency, outdoor furniture layout and terrace finishes are coordinated against one set of dimensions rather than four.
- One production and shipment plan. Logistics and door-to-door delivery covers freight by sea, air and rail, packaging and container loading, customs paperwork and shipment tracking. Consolidating the swim spa with other elements reduces the number of separate consignments arriving on a tight site programme.
- One interface owner at installation. Installation and after-sales support includes on-site installation, inspection and snags, so the pool edge, deck finishes and adjacent joinery are closed off by a party who already knows the drawings.
- Design work before purchase. Interior design services cover space planning, furniture layouts and 3D renderings, which is where the swim spa's position relative to pergolas, loungers and screening gets resolved on paper instead of on site.
Where a project needs non-standard dimensions or finishes around the pool deck, custom and OEM work — bespoke material, finish and texture choices, prototyping before production — can be handled by the same team that quotes the spa, so the interface detail does not get outsourced to a third party.
Step 5 — Build the budget in three layers
A workable swim spa budget on a multi-product order is split into three layers, each approved separately:
Layer 1 — The unit and its options
- The selected model with the equipment set shown on its catalogue page.
- Catalogue-listed options priced as visible line items: UV sterilization, additional water pumps, heat pump, sand filtration, insulation, steps.
- A written confirmation of included equipment and electrical requirements for the ordered configuration.
Layer 2 — Site and services
- Base, plinth or recess, waterproofing and drainage around a shell of 5800 × 2200 × 1420 mm.
- Dedicated supply sized against the published total power of 8.75 kW, plus protection and control wiring.
- Lifting, access and any temporary protection of adjacent finishes already installed.
Layer 3 — Programme and risk
- Lead time for the selected configuration, aligned with the rest of the package rather than treated as a separate critical path.
- A named interface list: who supplies power to the unit, who forms the deck edge, who commissions, who hands over.
- A contingency held against option changes decided after order, not against unknown scope.
Common scoping mistakes on multi-product orders
- Quoting the spa before the access route is measured. A 5800 mm module that cannot pass the side gate becomes a crane lift, and crane access was never in the budget.
- Treating total power as an electrical contractor's problem. The published load needs to be on the drawings before first fix; late changes mean exposed trunking or a supply upgrade.
- Cutting accessories to hit a number, then buying them back later. Insulation and filtration affect running conditions, not just purchase price — compare models within the range first.
- Ordering terrace furniture and screening after the spa is fixed. Wind exposure, privacy screening and lounger layout all read better when set out in the same 3D layout as the pool.
A short checklist before you commit
- Confirmed model, dimensions and equipment list against the catalogue page for that configuration.
- Options priced individually, with heat pump, filtration and insulation decisions made explicitly.
- Electrical load on drawing, with the supply and protection scope assigned to a named party.
- Access route, lifting method and site window agreed before order.
- Adjacent scope — deck edge, waterproofing, outdoor furniture, screening — issued from one coordinated set of drawings.
- Delivery, installation and handover sequence written into the project programme alongside the rest of the package.
Send the pool element with the rest of your package
Share the model you are considering, the site drawings and the surrounding scope — joinery, finishes, outdoor furniture, sanitaryware — and SANTERSON can return a configuration list, an interface list and a consolidated quotation. Contact PHILLIP on WhatsApp +86 13928214007 or email santerson@qq.com, or use the contact page.