A swim spa of this size is not a catalogue item you can order from a photograph. Before any purchase order is raised, a project buyer needs the supplier to confirm what is actually included in the shell, what arrives separately, and who handles the electrical, base and delivery arrangements at site. This article uses our Outdoor Swim Spa WS-S12-T as a worked example, so you can see exactly which documents and answers to ask for before a purchase order is raised.

Start with the configuration sheet, not the model name

Long swim spas are sold in variants that look identical in a product gallery but differ in what is fitted inside the cabinet. Our WS-S12-T and the closely related Outdoor Swim Spa WS-S12 share the same catalog shell dimensions, yet the swim training system appears in the -T specification and is not listed for the standard one. That single difference changes how the unit is used day to day: one is a lap-swimming and hydrotherapy combination, the other is primarily a jet and spa unit.

Ask the supplier for a written configuration sheet that names every item included in the quoted price, with quantities. On our page the specification block reads as follows.

Item shown on the product pageWhat to confirm before ordering
Catalog dimensions 11740 × 2200 × 1470 mmWhether these are external shell dimensions, and what working clearance the plant room, steps and lid need around them.
Control system: 1 setWhich controller is supplied, how it is mounted, and whether a spare or replacement module is available.
Swim training system: 1 setWhether it is included in your quote or an add-on, and what flow it produces for the depth of the swim lane.
Water pumps: 2 pcs · Filter pump: 1 pcPump make and model, service access, and replacement lead time.
Jet total: 73 pcsJet layout by zone, so you know whether the seating or the swim lane carries most of them.
LED lights: 1; 50 small LED lightsFitting positions and the low-voltage supply arrangement.
Total power: 7.65 kWWhether this figure covers only the listed equipment, or assumes a heat pump is added. Then have your electrician size the circuit against it.
Features shown: water jets, LED lighting, ozone, swim training systemWhether ozone sanitisation is included or UV sterilisation is substituted, and what consumables you will need each year.
Read the numbers as a starting point, not a promise. The figures above are transcribed from our product page. A configuration can change between the catalogue entry and your order, so ask for the specification of the exact unit being manufactured for you, signed off in the quotation.

Treat power and water treatment as a separate line item

The most expensive surprises on a swim spa project are usually outside the shell. The total power figure on a specification sheet tells you what the equipment draws, not what your site must deliver. Before confirming an order, ask the supplier to state:

  • Supply voltage and phase required by the selected configuration, and whether a heat pump is included or optional.
  • Circuit protection and earthing expectations, in writing, for your electrician to work from.
  • Which filtration route you are being quoted — the accessories list includes sand filtration, so ask what is fitted as standard and where the filter sits for servicing.
  • Whether insulation is part of the build or an optional accessory, since it drives running cost in cooler months more than any other single item.

Our catalogue lists control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps as options. Availability and compatibility vary by model, so a supplier who will not confirm the option list in writing is asking you to accept an undefined product.

Check that the supplier can actually make what your site needs

A standard shell does not always fit the terrace, setback or courtyard you have. Where dimensions are constrained, ask whether a bespoke shape is available rather than forcing a standard unit into a tight space. We offer Customizable Shape Outdoor Spa options — square, round, oval and curved — with an acrylic shell and structural reinforcement, for gardens, terraces and leisure areas where a rectangular run will not work.

For a buyer, custom capability is worth testing with three specific questions: can the supplier produce shop drawings from your dimensions before production starts; which material and finish choices are genuinely available rather than aspirational; and what minimum order applies. A manufacturer who runs Custom & OEM Service work should answer all three with drawings and a sample schedule, not a verbal reassurance.

Ask who carries the unit to the ground it will sit on

A shell of just under 12 m is a logistics problem before it is a product. Route planning, lifting gear and an adequate base are the three points where projects stall. A supplier handling export work should be able to describe packaging and container loading, freight by sea, air or rail, customs documentation such as commercial invoices, packing lists and certificates of origin, and shipment tracking through to Logistics & Door-to-Door Delivery. Ask which leg you are responsible for and where the supplier's obligation ends.

Then confirm what happens after delivery. On-site installation support, an inspection list to sign off against, spare parts availability and a stated maintenance route all belong in the contract. We describe this scope under Installation & After-sales Support, and buyers should expect the same detail from any other vendor: named responsibilities, not a general promise of "support".

Why a single supplier simplifies poolside fit-out

A swim spa rarely sits alone. Loungers, shade structures, storage for chemicals and towels, paving and wall finishes around it all get specified at the same time, and split across three or four vendors they arrive on different dates with different contacts. Where a supplier also handles Swimming Pools and Swim Spas alongside outdoor furniture, wall panels, lighting and interior fixtures, one coordination point covers the whole poolside package. That is the practical value of a One-stop Furniture and Building Materials Supplier on a villa or hospitality project: fewer interfaces, one delivery schedule, and one party accountable when something arrives wrong.

A pre-order checklist for the buyer

  • Configuration sheet with named equipment and quantities, matched to your quotation — including whether the swim training system is in scope.
  • Confirmed external dimensions plus clearance allowance, checked against site access and the base design.
  • Electrical requirements in writing: voltage, phase, circuit protection, and how the stated total power figure was derived.
  • Water treatment route confirmed — ozone or UV — plus the consumables list and expected replacement interval.
  • Insulation and steps confirmed as included or optional, with running-cost implications noted.
  • Delivery terms stating where the supplier's responsibility ends, plus packaging and lifting arrangements.
  • Installation, snag inspection, spare parts and maintenance terms written into the purchase order.
  • If dimensions or finishes are bespoke: shop drawings approved before production begins.
If you are specifying a long swim spa for a villa, resort or private residence project, send us the site dimensions and the use you have in mind — lap swimming, hydrotherapy, or both — and we will confirm which configuration of the range fits, with the equipment list, power requirements and delivery scope set out in writing before anything is produced. Contact PHILLIP to start the specification review.