A parquet floor rarely fails because the timber is wrong. It fails because nobody wrote down what was ordered, how it was meant to be fixed down, and what the site conditions were on the day it arrived. For procurement teams specifying European Oak Parquet Engineered Wood Flooring, the paperwork is the product warranty. This article sets out exactly which records to open before a purchase order is raised, and which fields to keep filling in through delivery and handover.
Why parquet documentation matters more than a flat board
Parquet is assembled from many small elements, so a single mistake repeats across the whole field. A plank that is out of square by half a millimetre disappears in a long run; a block that is off by the same amount shows up as a stepped pattern every few rows. Engineered construction helps here. The boards in our flooring range are built with a 3 mm solid oak wear layer over a multilayer base, a build the product pages describe as reducing deformation and warping compared with a single-piece board. That stability is a reason to buy parquet at all, but it also means the floor behaves as a system: top layer, core, adhesive, subfloor and finishing have to be recorded together, not separately.
The second reason is commercial. When a dispute arises two years after handover, whoever holds dated photographs, batch numbers, delivery notes and signed acceptance sheets controls the conversation. Procurement teams who treat documentation as an afterthought inherit whatever the installer says happened.
Record 1: the exact product reference, not a category name
The parquet range is easy to confuse with itself. Our catalogue lists several parquet boards that differ mainly in tone and grain — a deep brown board at product 1849, warm-toned options at 1848 and a light, clean board at 1850, alongside herringbone layouts such as the dark board at 1851. A requisition that reads "European oak parquet, 3 mm lamella" matches all of them.
- The product URL and model number from the supplier's listing, copied exactly rather than paraphrased.
- Colour and grain description as published, plus a reference to the approved physical sample or shipped photo.
- The pattern: parquet block, herringbone, chevron or mixed layout. Send a layout drawing, not just a word.
- Board dimensions, thickness and wear-layer figure as stated in the specification sheet you received with the quotation.
Practical point: tone names such as "light", "dark brown" or "charcoal" are marketing labels that shift between ranges. Keep the numeric product reference as the single source of truth, and attach a dated image of the approved sample to it.
Record 2: quantities, tolerances and batch control
Parquet orders go wrong on quantity in two directions. Too little, and a re-order arrives from a different production run against a floor already half laid. Too much, and the surplus sits in a warehouse absorbing moisture until it is unusable.
- Net measured area per room, plus the cutting allowance you actually applied, with the percentage stated so the next buyer can audit it.
- Total square metres ordered, expressed in the same unit as the quotation — square metres or number of boxes, never both loosely.
- Whether the whole delivery comes from one batch. If it does not, record which batch goes to which area.
- A reserved spare quantity for future repairs, stored under the same conditions as the installed floor.
Batch consistency is the single most valuable line in this section. Oak is a natural material with visible grain and knots, and the product descriptions themselves refer to natural grain and subtle knots. Adjacent batches can differ slightly in tone; documenting which pallet went where turns a "the floor does not match" complaint into a traceable fact.
Record 3: substrate and site conditions at handover
An engineered parquet floor only performs as well as the slab under it. Before any board is unpacked, the site team should sign off a condition sheet covering:
| Item to document | What to write down |
|---|---|
| Subfloor type and flatness | Screed, plywood or existing deck; measured deviation over a straight edge, with the tolerance agreed in writing. |
| Moisture reading | Instrument, method, reading, date and the person who took it. Repeat after any delay of more than a few weeks. |
| Heating arrangement | Whether underfloor heating is present, its type, and whether the flooring specification supplied for this project covers that use. |
| Room humidity and temperature | Readings on the delivery date and on the installation start date, since these change with the season and with wet trades still finishing nearby. |
| Acclimatisation | How long the cartons stood in the room before laying, stacked how, and where they were stored before that. |
Some of our boards are described on their product pages as compatible with underfloor heating; others are not marked that way. Do not generalise across the range. Record the statement for the specific reference you bought, and attach the page or data sheet it came from.
Record 4: fixing method and finishing system
The installation method belongs in the buyer's file, not only the fitter's memory. Specify and confirm on site:
- Adhesive type and coverage rate, or the mechanical fixing and underlay used, with product names.
- Perimeter expansion gap actually left, photographed before skirting goes on.
- Sanding and finishing sequence: number of coats, product names, drying time observed on site.
- Transition details at thresholds, columns and door openings, where movement shows up first.
Photographs do the heavy lifting here. A phone image of the expansion gap before the skirting is fitted settles most perimeter complaints without an argument.
Record 5: delivery, logistics and acceptance
For international orders the documentation trail starts at the port. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs paperwork such as commercial invoices, packing lists and certificates of origin, container loading and shipment tracking. On the receiving side, capture:
- Packing list against the purchase order line by line, before cartons leave the delivery vehicle.
- Carton condition on arrival — crushed corners, wet wrap, broken straps — photographed with the carton labels visible.
- Incoterms and who carried insurance for the transit leg.
- Storage location between delivery and installation, and whether it was heated, damp or open.
Carton damage is often dismissed as cosmetic. With parquet it usually precedes a board that will not close properly at the tongue, so record it while the labels are still readable.
Record 6: samples, approvals and change control
Every substitution needs a paper trail. When a project swaps one parquet reference for another — a light board replaced by a smoked or darker tone to match revised joinery — the change should carry a date, an approver, and a note on whether quantities and lead times moved with it. Where finishes are being matched across trades, request physical samples rather than printed images, since screen reproduction of oak tones varies widely.
If the project also touches custom joinery or matching built-in furniture, our custom and OEM service handles bespoke finishes and material selection, which means the flooring sample and the cabinetry sample should be approved against each other in the same file.
Record 7: handover pack and aftercare
- As-built areas laid per room, with offcuts retained as a spare set.
- Adhesive and finish product data sheets, so future repairs use compatible materials.
- Cleaning regime recommended for the specific finish used, and what to avoid.
- Contact route for warranty and spare-parts queries, plus the original order reference attached to it. Our installation and after-sales support covers inspection, snag lists and replacement parts.
A documentation checklist you can reuse
| Stage | Document to open |
|---|---|
| Specification | Product reference sheet with URL, pattern drawing, approved sample photo |
| Ordering | Quantity schedule with cutting allowance, batch plan, spares quantity |
| Site readiness | Substrate and moisture sheet, heating confirmation, environmental readings |
| Delivery | Packing list check, damage photos, storage note |
| Installation | Fixing and finishing record, expansion-gap photos, layout approval |
| Handover | As-built areas, data sheets, aftercare instructions, spare set location |
Six documents, opened at the right moment, cost a procurement team a couple of hours per project and remove most of the expensive arguments afterwards.
Specifying flooring for a villa or hospitality project?
SANTERSON supplies engineered European oak flooring alongside the cabinetry, wall panels, lighting and furniture it manufactures, so the finishes in one project can be specified and shipped together. Send the drawings and the flooring references you are considering through our contact page, and we will return a specification sheet with product references, quantities and packing details for your file.